Product Description

Record single-person interviews and vlogs with your Multi Interface compatible Sony Camera using this Sony ECM-W3S Wireless Microphone Kit with Charging Case (Single Mic), thanks to its one clip-on transmitter with built-in microphone and single-channel receiver with Multi Interface Shoe connection. The system supports the recording of both analog and digital audio signals in both mixed or separate channels for the ultimate postproduction flexibility. The receiver is ultracompact and has integrated 3.5mm TRS and USB-C output ports. Two switches on the side allow you to select separate or mixed channel recording and toggle between analog and digital output modes. Toggle safety track recording to protect against unforeseen interruptions. An attenuator switch on the transmitter unit prevents clipping.

 

Key Features of the Sony ECM-W3S Wireless Microphone Kit with Charging Case (Single Mic)

  • For Content Creation, Mobile Journalism
  • For 1-Person Shoots with Sony Cameras
  • 1 x Transmitter with Built-In Mic
  • Single-Channel Receiver with MI Shoe
  • 492' Transmission via Bluetooth 5.3
  • 3.5mm TRS and USB-C Ports
  • Noise Cancellation, Low-Cut Filter
  • Attenuator Function, LED Indicators
  • Charging Case, 6-Hour Battery Life

 

Bluetooth Wireless Communication

The units communicate with one another via Bluetooth 5.3 low-energy LC3plus codec from up to 492' away. The Bluetooth LC3plus codec ensures low power consumption and low latency while maintaining high sound quality.

Multi Interface Shoe

Use the receiver's integrated Multi Interface Shoe for cable-free connection to your compatible Sony camera. The camera body can supply power to the receiver when attached. Audio is transmitted via direct digital signal for high-quality sound free of transmission deterioration.

Digital Sound Recording

A digital MEMS microphone with a high signal to noise ratio are integrated into the transmitter to capture clear audio with low noise. You can eliminate distortion even further using the built-in noise cut and low-cut filters. The noise cut filter uses digital signal processing to remove interference, while the low-cut filter reduces unwanted low-frequency noise such as wind, air conditioning units, and vibrations.

Clip-On Transmitter

  • Noise cut filter, low-cut filter
  • Three attenuation settings: 0, 10, or 20 dB
  • 3.5mm TRS jack for external microphone input

Battery Life

  • Each component features an integrated lithium-ion battery.
  • The transmitter can operate for six hours at a time on a full charge.
  • Use the included charging case to recharge the components when on the go.>

Component Design

LED indicators on the receiver and transmitter indicate the communication status and allow you to monitor battery levels. All components are designed to be moisture and dust resistant for outdoor shooting. Included furry windscreens reduce wind noise.

 

  • MPN - ECM-W3S
  • GTIN - 4548736157804
Read More

Sony ECM-W3S Wireless Microphone Kit with Charging Case (Single Mic)

SKU
155748
Price Slashed $599.00
digiDirect Price
$397.00
$202.00 Off
Sydney CBD Unavailable
Melbourne CBD Unavailable
Brisbane Unavailable
Miranda Unavailable
Cannington Unavailable
Bondi Junction Unavailable
Parramatta Unavailable
St. Peters (Click and Collect Only) Available
test Available
LatitudePay
$599.00
PAYMENT OPTIONS
Interest free, flexible repayments APPLY NOW!
Earn 397 Qantas Points until 30 September 2023

Frequently Bought With

Select All
Total Price: $0.00

Looking for more? Explore digiMarket

Discover More

Load More

People Who Viewed This Item Also Viewed

Load More

Product Overview

  • For Content Creation, Mobile Journalism
  • For 1-Person Shoots with Sony Cameras
  • 1 x Transmitter with Built-In Mic
  • Single-Channel Receiver with MI Shoe
  • 492' Transmission via Bluetooth 5.3
  • 3.5mm TRS and USB-C Ports
  • Noise Cancellation, Low-Cut Filter
  • Attenuator Function, LED Indicators
  • Charging Case, 6-Hour Battery Life
+ Read more

Record single-person interviews and vlogs with your Multi Interface compatible Sony Camera using this Sony ECM-W3S Wireless Microphone Kit with Charging Case (Single Mic), thanks to its one clip-on transmitter with built-in microphone and single-channel receiver with Multi Interface Shoe connection. The system supports the recording of both analog and digital audio signals in both mixed or separate channels for the ultimate postproduction flexibility. The receiver is ultracompact and has integrated 3.5mm TRS and USB-C output ports. Two switches on the side allow you to select separate or mixed channel recording and toggle between analog and digital output modes. Toggle safety track recording to protect against unforeseen interruptions. An attenuator switch on the transmitter unit prevents clipping.

 

Key Features of the Sony ECM-W3S Wireless Microphone Kit with Charging Case (Single Mic)

  • For Content Creation, Mobile Journalism
  • For 1-Person Shoots with Sony Cameras
  • 1 x Transmitter with Built-In Mic
  • Single-Channel Receiver with MI Shoe
  • 492' Transmission via Bluetooth 5.3
  • 3.5mm TRS and USB-C Ports
  • Noise Cancellation, Low-Cut Filter
  • Attenuator Function, LED Indicators
  • Charging Case, 6-Hour Battery Life

 

Bluetooth Wireless Communication

The units communicate with one another via Bluetooth 5.3 low-energy LC3plus codec from up to 492' away. The Bluetooth LC3plus codec ensures low power consumption and low latency while maintaining high sound quality.

Multi Interface Shoe

Use the receiver's integrated Multi Interface Shoe for cable-free connection to your compatible Sony camera. The camera body can supply power to the receiver when attached. Audio is transmitted via direct digital signal for high-quality sound free of transmission deterioration.

Digital Sound Recording

A digital MEMS microphone with a high signal to noise ratio are integrated into the transmitter to capture clear audio with low noise. You can eliminate distortion even further using the built-in noise cut and low-cut filters. The noise cut filter uses digital signal processing to remove interference, while the low-cut filter reduces unwanted low-frequency noise such as wind, air conditioning units, and vibrations.

Clip-On Transmitter

  • Noise cut filter, low-cut filter
  • Three attenuation settings: 0, 10, or 20 dB
  • 3.5mm TRS jack for external microphone input

Battery Life

  • Each component features an integrated lithium-ion battery.
  • The transmitter can operate for six hours at a time on a full charge.
  • Use the included charging case to recharge the components when on the go.>

Component Design

LED indicators on the receiver and transmitter indicate the communication status and allow you to monitor battery levels. All components are designed to be moisture and dust resistant for outdoor shooting. Included furry windscreens reduce wind noise.

 

  • MPN - ECM-W3S
  • GTIN - 4548736157804
+ Read more

System

Wireless Technology Analog/Digital Hybrid
Number of RF Channel Frequencies 1
Included Transmitters 1 x Clip-On with Microphone
Diversity Non-Diversity
RF Channel Scanning Auto-Scan
Max Operating Range 492.1' / 150 m
Max Transmitters per Band 1
Built-In Recorder No
Timecode Support No
Mobile App Compatible No *As of September, 2023: Check with manufacturer for the most up-to-date compatibility
Bluetooth 5.3
Bluetooth Operating Distance 492.1' / 150 m

Receiver

Receiver Type Camera-Mount
Mounting Options Shoe-Mount (with Included Hardware)
Antenna Internal
Number of Audio Channels 2
Audio I/O 1 x 1/8" / 3.5 mm TRS Unbalanced Output
  1 x Intelligent Hot Shoe Output
Frequency Response 20 Hz to 20 kHz
Network I/O No
USB/Lightning Connectivity USB-C Female
Power Requirements Battery
Battery Type 1 x Built-In Rechargeable
Display & Indicators LED
Operating Temperature 32 to 104°F / 0 to 40°C
Dimensions 1.3 x 1.1 x 2" / 32 x 29 x 50 mm
Weight 0.9 oz / 25 g

Transmitter

Transmitter Type Clip-On with Microphone
RF Output Power Not Specified by Manufacturer
Audio I/O 1 x 1/8" / 3.5 mm TRS Female Input
Auto-Level Control Yes
Frequency Response 20 Hz to 20 kHz
Sync Method Bluetooth
Antenna Internal
Power Requirements Battery
Battery Type 1 x Built-In Rechargeable
Approx. Battery Life 6 Hours
USB/Lightning I/O No
Display & Indicators LED
Operating Temperature 32 to 104°F / 0 to 40°C
Dimensions 1 x 2.1 x 0.8" / 25 x 53.5 x 20.5 mm
Weight 0.6 oz / 17 g

Microphone

Microphone Type Integrated
Sound Field Mono
Polar Pattern Omnidirectional
Frequency Range 20 Hz to 20 kHz
Maximum SPL 120 dB SPL
Sensitivity -20 dBFS at 1 kHz
Operating Temperature 32 to 104°F / 0 to 40°C

Charging Case

Battery Chemistry Lithium-Ion
Capacity Not Specified by Manufacturer
Charging Interface USB-C
Dimensions 2.7 x 2.6 x 1.6" / 68.5 x 65.5 x 41.5 mm
Weight 3.2 oz / 90 g

Packaging Info

Package Weight 0.26 kg
Box Dimensions (LxWxH) 12.45 x 12.19 x 9.65 cm 
+ Read more
What’s In The Box
  • Sony ECM-W3S Wireless Microphone Kit with Charging Case (Single Mic)
  • Transmitter
  • Receiver
  • Charging Case
  • MI Shoe Cap
  • Furry Windscreen
  • Pouch
+ Read more
Write Your Own Review
You're reviewing:Sony ECM-W3S Wireless Microphone Kit with Charging Case (Single Mic)
Your Rating
+ Read more

You May Also Like

Load More

How About Adding These?

Select All
Total Price: $0.00