Manfrotto MK190X3-2W Tripod Kit w/ MHXPRO2W Fluid Head

Earn 479 Qantas Points
$479.00
Loading...
Product Overview

  • Manfrotto 190X3 Three Section Tripod with MHXPRO-2W Fluid Head
  • Load Capacity: 4 kg
  • Maximum height: 170 cm
  • Weight: 2 kg
  • Two Tilt Drag Settings
  • Fixed Pan Drag
  • Separate Pan and Tilt Locks
  • QR Plate
  • Leg Section 3
  • 2 Stage Aluminum Legs
  • Four Pre-Set Locking Positions
  • Easy Link Accessory Port
  • Manfrotto MHXPRO 2-Way, Pan-and-Tilt Head with 200PL-14 Quick Release
  • Load Capacity: 4 kg
  • Simultaneous Pan-and-Tilt
  • 2-Level Drag Selection for Tilt Movement
  • 90° Forwards and 60° Backwards Tilt
  • Pan 360°, Built-In Bubble Level
  • Right and Left Pan Handle Mounts
  • Independent Pan-and-Tilt Locks
  • RC2 Quick Release Cam Lock
  • 200PL-14 Quick Release Plate
  • 1/4"-20 Mount, Non-Slip Surface
+ Read more

The Manfrotto 190X3 Three Section Tripod with MHXPRO-2W Fluid Head includes a Manfrotto MHXPRO 2-Way, Pan-and-Tilt Head with 200PL-14 Quick Release

The Manfrotto's 190X3 Three Section Tripod with MHXPRO-2W Fluid Head is suitable for still photographers, video shooters, and even birdwatchers who want professional features in a small package. The included head supports over eight pounds of camera and accessories on ahead with two fluid drag settings to smooth your tilts. The head allows you to tilt from straight down to almost straight up in one continuous motion, and the quick release camera plate lets you quickly pull your camera from the head when you have to move quickly.

Two tilt drag settings allow you to adjust the head to match the needs of the shot, and the fixed pan settings provide you resistance for slow smooth pans. The aluminium legs feature a 10" triangular-shaped centre column that adds height while maintaining torsional stability. The spreaders design and independent leg height adjustment allow you to use the legs on uneven surfaces without suffering from wobble that ground-level spreaders can cause. Four preset locking positions allow you to lower the legs to approx. 19 cm high or nearly to the ground with the optional ground level adapter.


Key Features of the Manfrotto 190X3 Three Section Tripod with MHXPRO-2W Fluid Head

  • Load Capacity: 4 kg
  • Maximum height: 170 cm
  • Weight: 2 kg
  • Two Tilt Drag Settings
  • Fixed Pan Drag
  • Separate Pan and Tilt Locks
  • QR Plate
  • 3 Section, 2 Stage Aluminum Legs
  • Four Pre-Set Locking Positions
  • Easy Link Accessory Port

Head

  • The fixed pan drag and two settings for tilt drag allow you to tune the head to provide smooth moves when used with optional cameras and accessories that weigh less than 4 kg.
  • Dual panhandle rosettes allow you to mount the included panhandle on either side of the fluid head.
  • The included quick-release plate mounts on the head, the quick release mechanism features a safety release mechanism that helps keep your gear secure

Legs

  • Quick Power Lock leg clamps allow single-hand operation, while securely locking the legs against slipping.
  • Manfrotto/s Easy Link port is a 3/8"-16 that is built into the top casting and allows you to easily attach optional accessories to your legs.

 

Manfrotto MHXPRO 2-Way, Pan-and-Tilt Head with 200PL-14 Quick Release

This Manfrotto MHXPRO 2-Way, Pan-and-Tilt Head has a load capacity of 4 kg and can be attached to tripods or other support systems that feature a 3/8"-16 mount. It includes an integrated RC2 quick release cam lock and a 200PL-14 Quick Release Plate. RC2 compatible quick release plates such as the 200PL-14 can be removed from the head by pulling the cam lock's spring-loaded lever, which also allows the plate to be quickly reattached. The cam lock also features a safety catch to prevent the 200PL-14 or another compatible quick release plate from accidentally disconnecting.

Cameras, sport optics, or camcorders that are compatible with a 1/4"-20 mount can be connected to the quick release plate before securing it to the pan-and-tilt head. The MHXPRO 2-Way, Pan-and-Tilt Head offers a +90°/-60° tilt angle, a 360° pan angle, two levels of tilt drag, plus a pan bar with a rubber grip that is interchangeable to either side of the head. Both the pan and tilt movements can each be locked into place and an integrated bubble level helps to ensure that this head and the device mounted to it is properly aligned to the subject


Key Features of the Manfrotto MHXPRO 2-Way, Pan-and-Tilt Head with 200PL-14 Quick Release

  • Load Capacity: 4 kg
  • Simultaneous Pan-and-Tilt
  • 2-Level Drag Selection for Tilt Movement
  • 90° Forwards and 60° Backwards Tilt
  • Pan 360°, Built-In Bubble Level
  • Right and Left Pan Handle Mounts
  • Independent Pan-and-Tilt Locks
  • RC2 Quick Release Cam Lock
  • 200PL-14 Quick Release Plate
  • 1/4"-20 Mount, Non-Slip Surface

MHXPRO 2-Way, Pan-and-Tilt Head

  • 4 kg of load capacity
  • Compatible with tripods or support systems that feature a 3/8"-16 mount
  • +90°/-60° tilt angle, a 360° pan angle, two levels of tilt drag, plus a pan bar with a rubber grip that is interchangeable to either side of the head
  • Pan and tilt movements on video head can each be locked into place
  • Integrated, RC2 quick release cam lock
  • Built-in bubble level
  • Durable and lightweight polymer and fibreglass construction

200PL-14 Quick Release Plate

  • Compatible with Manfrotto RC2 quick release cam lock
  • Measures 4 x 5 x 1 cm and has a rubberized, non-slip surface
  • 1/4"-20 mount
  • Durable, aluminium-alloy construction

  • MPN - MK190X3-2W
  • GTIN - 8024221635942
+ Read more

System

Load Capacity 8.8 lb / 4 kg
Height Max Height
66.9" / 170 cm (with center column extended)
58.3" / 148 cm (with center column retracted)

Min Height
7.5" / 19 cm

Folded
27.2" / 69 cm
Weight 5.8 lb / 2.7 kg

Head

Load Capacity 2.2" (55 mm) center of gravity: 8.8 lb / 4 kg
Material AdaptoTechnopolymer, aluminium
Quick Release Yes, 200PL
Camera Mount Thread Size 1/4"-20
Tripod Mount Thread Size 3/8"-16
Tilt Range -60 to 90°
Bubble Level Yes
Fluid Drag Tilt: 2 steps, variable
Pan: fixed
Independent Pan Lock Yes
Independent Tilt Lock Yes
Height 3.9" (10 cm)
Weight 1.7 lb (0.76 kg)

Tripod Legs

Material of Construction Aluminium
Load Capacity 15.4 lb / 7 kg
Height Max Height
63" / 160 cm (with center column extended)
53.1" / 135 cm (with center column retracted)

Min Height
3.5" / 9 cm

Folded
23.2" / 59 cm
Weight 4.4 lb / 2 kg
+ Read more
Write Your Own Review
You're reviewing:Manfrotto MK190X3-2W Tripod Kit w/ MHXPRO2W Fluid Head
Your Rating
+ Read more
What’s In The Box
  • Manfrotto 190X3 Three Section Tripod with MHXPRO-2W Fluid Head
  • Manfrotto MHXPRO 2-Way, Pan-and-Tilt Head with 200PL-14 Quick Release
  • 200PL-14 Quick Release Plate
  • Panhandle
  • Tripod Legs
+ Read more