The store will not work correctly when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies.Learn more.
The Elinchrom D-Lite 400W/s RX 4 Flash Head raises the bar on the capabilities of a lightweight, portable strobe. The auto-sensing, multi-voltage flash D-Lite RX 4 recognizes any AC power source from 90-260VAC, allowing power variability over 5.0 stops in 1/10 stop increments. Recycling is a lightning-fast 0.35-1.6 sec. (115V) with flash durations as short as an action-stopping 1/800 sec at full power. But that's just the beginning.
The D-Lite 400W/s RX 4 is packed with professional and convenience features usually found in flash heads twice its price. Forget about tripping over PC cords. Although this head accepts one it also has a built-in EL-Skyport Receiver with eight frequency channels that can handle four distinct groups of flashes. Separate purchase of the EL Skyport ELS Speed Transmitter not only allows you to trigger your flash at distances up to 120 m but gives you control of power on/off, modeling light functions, and Speed Sync activation. Free software for Mac and PC computers is available, providing additional features such as Flash-Delay for strobing effects. Add an optional Wi-Fi module to the transmitter and you can use specially designed apps that allow full remote control via your for iPhone, iPad, or iPod Touch.
D-Lite 400W/s RX 4's bayonet mount accepts all Elinchrom accessories and softboxes up to 135 cm. It comes with a power cord with a U.S. plug, sync cord, flash tube, and protective cap. The included 120V 100W modeling lamp must be swapped out when using the unit in nominal 230V electrical environments.
Key Feature of the Elinchrom D-Lite RX 4 Head With Protection Cap
Built-in EL-Skyport receiver for triggering
8 Frequency channels with 4 groups
Speed Sync mode for synchronization up to a 1/320 sec. on enabled SLR cameras
Pre-Flash detector system to enable the use of D-Lite RX with speedlights
Power Auto-dump
5V sync socket for maximum protection of digital cameras
The Elinchrom D-Lite 400W/s RX 4 Flash Head raises the bar on the capabilities of a lightweight, portable strobe. The auto-sensing, multi-voltage flash D-Lite RX 4 recognizes any AC power source from 90-260VAC, allowing power variability over 5.0 stops in 1/10 stop increments. Recycling is a lightning-fast 0.35-1.6 sec. (115V) with flash durations as short as an action-stopping 1/800 sec at full power. But that's just the beginning.
The D-Lite 400W/s RX 4 is packed with professional and convenience features usually found in flash heads twice its price. Forget about tripping over PC cords. Although this head accepts one it also has a built-in EL-Skyport Receiver with eight frequency channels that can handle four distinct groups of flashes. Separate purchase of the EL Skyport ELS Speed Transmitter not only allows you to trigger your flash at distances up to 120 m but gives you control of power on/off, modeling light functions, and Speed Sync activation. Free software for Mac and PC computers is available, providing additional features such as Flash-Delay for strobing effects. Add an optional Wi-Fi module to the transmitter and you can use specially designed apps that allow full remote control via your for iPhone, iPad, or iPod Touch.
D-Lite 400W/s RX 4's bayonet mount accepts all Elinchrom accessories and softboxes up to 135 cm. It comes with a power cord with a U.S. plug, sync cord, flash tube, and protective cap. The included 120V 100W modeling lamp must be swapped out when using the unit in nominal 230V electrical environments.
Key Feature of the Elinchrom D-Lite RX 4 Head With Protection Cap
Built-in EL-Skyport receiver for triggering
8 Frequency channels with 4 groups
Speed Sync mode for synchronization up to a 1/320 sec. on enabled SLR cameras
Pre-Flash detector system to enable the use of D-Lite RX with speedlights
Power Auto-dump
5V sync socket for maximum protection of digital cameras
What is Elinchrom D-Lite RX 4 Head with Protection Cap?
The Elinchrom D-Lite RX 4 Head with Protection Cap is a professional-level lighting system for studio and location photography. It features four flash heads, a s-type speedring, and a protective hard shell cap for storage and transport. It can be used for both still and motion applications.
What kinds of lighting can it be used for?
The Elinchrom D-Lite RX 4 Head with Protection Cap is great for both still and motion photography. You can use it to create soft, even lighting for product or portrait photography, shape light for creative effects, or light a scene for motion projects.
What kind of power source does it use?
The Elinchrom D-Lite RX 4 Head with Protection Cap uses a power supply and transformer. It is also compatible with an Elink Hub for remote power and control via an Ethernet connection.
What accessories are included?
The Elinchrom D-Lite RX 4 Head with Protection Cap includes four flash heads, a s-type speedring, a protective hard shell cap for storage and transport, and a power supply and transformer.
