We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
This Benro MoveOver8 600mm Slider includes an aluminum slider carriage that runs on carbon fiber rails with 59.9 cm of actual carriage travel, and a soft carry case. The carriage features a flat mounting surface with a 3/8"-16 threaded mounting stud for mounting your flat base fluid head, and it features pre-tensioned roller bearings for a smooth glide. A built-in friction brake is controlled by a single knob, allowing you to adjust the friction on the slider, or even use it as a brake when the slider is level.
The slider features 18mm diameter carbon fiber rails and supports a total payload of up to 17.6 pounds. The slider can be mounted on a tripod or stands, or placed on a level surface. The built-in bubble level enables you to confirm that your slider is level. Each leg mounts onto the slider track ends via a rosette and can rotate throughout 360°, and each foot has approximately 10.16 cm of height adjustment for leveling. You can operate the slider on any angle from 0 to 90°, and you can even undersling the slider.
This Benro MoveOver8 600mm Slider includes an aluminum slider carriage that runs on carbon fiber rails with 59.9 cm of actual carriage travel, and a soft carry case. The carriage features a flat mounting surface with a 3/8"-16 threaded mounting stud for mounting your flat base fluid head, and it features pre-tensioned roller bearings for a smooth glide. A built-in friction brake is controlled by a single knob, allowing you to adjust the friction on the slider, or even use it as a brake when the slider is level.
The slider features 18mm diameter carbon fiber rails and supports a total payload of up to 17.6 pounds. The slider can be mounted on a tripod or stands, or placed on a level surface. The built-in bubble level enables you to confirm that your slider is level. Each leg mounts onto the slider track ends via a rosette and can rotate throughout 360°, and each foot has approximately 10.16 cm of height adjustment for leveling. You can operate the slider on any angle from 0 to 90°, and you can even undersling the slider.
Load Capacity | Horizontal:32 kg (23 kg with extensions) Vertical:11 kg (with camera up to 24.8 cm out from carriage) Upside-Down:20 kg |
---|---|
Load Capacity | 7.71 kg |
Bubble level | Yes |
Actual Slider Carriage Travel | 0.6 m |
Body Material | Aluminum |
Carriage Dimensions | 166.0 x 119.0 x 13.0 mm |
Quick Release Plate Type | No Quick Release |
Rail Material | Carbon Fiber |
Rail Diameter | 18 mm |
Stand Receiver | 5/8" x 2 |
Tripod Mounting | 3/8"-16 Female Thread x 2 1/4"-20 Female Thread |
Accessory Mounting | 1/4"-20 Female Thread (Carriage) x 4 1/4"-20 Female Thread (Rails) x 3 3/8"-16 Female Thread (Rails) 1/4"-20 and 3/8"16 accessory mounting threads x 2 1/4"-20 on the underside |
Camera Mounting Screw | 3/8"-16 Male |
Track Width | 100 mm |