Product Description

The Benro A2573F Aluminum Single Tube Tripod with S6Pro Fluid Video Head includes a Benro S6Pro Fluid Video Head.

The Benro A2573F Aluminum Single Tube Tripod with S6Pro Fluid Video Head includes an A2573F Aluminum Single Leg Tripod and a Benro S6Pro Fluid Video Head.

The Benro A2573F Aluminum Single Tube Tripod with S6Pro Fluid Video Head is a versatile system supporting up to 6 kg loads. It has a compact design with single-tube legs, and it features a 65mm flat base that allows moving the head from the tripod directly to sliders, jibs, and other support gear.


Key Features of the Benro A2573F Aluminum Single Tube Tripod with S6Pro Fluid Video Head

  • 6 kg Payload/5+0 Steps Counterbalance
  • 65mm Flat Base with 3/8"-16 Thread
  • Low-Angle 44 to 140 cm Height (2 Stages)
  • Three Leg Positions; Leveling Adapter

 

A2573F Tripod

The A2573F Aluminum Single Leg Tripod is a 2-stage/3-section tripod featuring a flat base centre column. With the head attached, the tripod reaches a maximum height of 180 cm when the column is fully extended. With the column retracted, it stands at approximately 162 cm maximum. The minimum height is 44 cm, which is an advantageous low height that isn't common among most tripods. At this height, you can set up the tripod for low angle shots in time-lapse and other applications. Each leg of the tripod is independently adjustable into three positions. Being able to snap the legs into one of these three positions will let you set up quickly and efficiently. Making things even more efficient, the centre column has a levelling adapter so that you can adjust the position of the fluid head without having to adjust the tripod legs.

The centre column also has a weight hook for sandbags and other loads you can hang off of it for additional stability. The A2573F tripod features rubber and spiked feet for use on virtually all types of terrain.


Key Features of the A2573F Aluminum Single Leg Tripod

  • Maximum height of 180 cm with the S6Pro attached and centre column extended
  • Low-angle minimum height of 44 cm
  • Single-tube legs independently adjustable into three positions
  • Levelling adapter on the end of the centre column
  • Spiked and rubber feet
  • Flip leg locks
  • Aluminium construction

 

S6Pro Fluid Head

The S6Pro head offers 5+0 steps of counterbalance and continuous pan and tilt drag. There are also independent pan and tilt locks. The tilt range is a wide +90/-75°, and the pan range is a full 360°.

Some parts of the head are made of magnesium and other parts of aluminium. Virtually the entire head, including its knobs, is made of robust yet lightweight metal. A pan bar is included that can be attached to a rosette adapter on the left or right side of the head, for left- or right-handed users. A camera plate is included that can be adjusted forward/backward to let you find the optimal balance for your camera. A safety lock on the plate ensures that once mounted, the plate won't slip out if you move it in either direction too much. Two camera screws are supplied—1/4"-20 and 3/8"-16—that can be stored underneath the camera plate on the head itself, in dedicated slots. For attaching accessories, there's a 1/4"-20 threaded hole on each side of the head to which you can secure articulating arms.


Key Features of the S6Pro Fluid Head

  • 6 kg payload
  • 65mm flat base with a 3/8"-16 thread
  • Compatible with 65mm flat base tripods and can be mounted directly on most sliders, jibs, and monopods
  • 5+0 steps of counterbalance
  • Continuous Pan and tilt drag
  • Independent pan and tilt locks
  • +90/-75° tilt range
  • 360° pan range
  • Made of magnesium and aluminium
  • Rosette adapters on the left and right side for attaching the included pan bar
  • Sliding camera plate with safety lock
  • 1/4"-20 and 3/8"-16 camera screws included and can be stored in dedicated spaces on the top of the head, underneath the camera plate
  • Two 1/4"-20 threaded holes for accessories

  • MPN - A2573FS6PRO
  • GTIN - 6931747313006
Read More

Benro Aluminum Single Tube Tripod with S6 Pro Fluid Video Head

Shipped by: digiDirect
SKU
137200
Price Slashed $702.90
digiDirect Price
$561.00
$141.90 Off
Sydney CBD Unavailable
Melbourne CBD Unavailable
Brisbane Unavailable
Miranda Unavailable
Cannington Unavailable
Bondi Junction Unavailable
Parramatta Unavailable
test Unavailable
LatitudePay
$702.90
AWAITING STOCK
This means item is within an estimated 2 weeks from delivery to digiDirect. For the latest ETA, please click here to contact us.
PAYMENT OPTIONS
Earn 561 Qantas Points until 30 September 2023

Frequently Bought With

Select All
Total Price: $0.00

Looking for more? Explore digiMarket

Discover More

Load More

People Who Viewed This Item Also Viewed

Load More

Product Overview

  • Benro A2573F Aluminum Single Tube Tripod with S6Pro Fluid Video Head
  • 6 kg Payload/5+0 Steps Counterbalance
  • 65mm Flat Base with 3/8"-16 Thread
  • Low-Angle 44 to 140 cm Height (2 Stages)
  • Three Leg Positions; Leveling Adapter
  • A2573F Aluminum Single Leg Tripod
  • Maximum height of 180 cm with the S6Pro attached and centre column extended
  • Low-angle minimum height of 44 cm
  • Single-tube legs independently adjustable into three positions
  • Levelling adapter on the end of the centre column
  • Spiked and rubber feet
  • Flip leg locks
  • Aluminium construction
  • S6Pro Fluid Head
  • 6 kg payload
  • 65mm flat base with a 3/8"-16 thread
  • Compatible with 65mm flat base tripods and can be mounted directly on most sliders, jibs, and monopods
  • 5+0 steps of counterbalance
  • Continuous Pan and tilt drag
  • Independent pan and tilt locks
  • +90/-75° tilt range
  • 360° pan range
  • Made of magnesium and aluminium
  • Rosette adapters on the left and right sides for attaching the included pan bar
  • Sliding camera plate with safety lock
  • 1/4"-20 and 3/8"-16 camera screws included and can be stored in dedicated spaces on the top of the head, underneath the camera plate
  • Two 1/4"-20 threaded holes for accessories
+ Read more

The Benro A2573F Aluminum Single Tube Tripod with S6Pro Fluid Video Head includes a Benro S6Pro Fluid Video Head.

The Benro A2573F Aluminum Single Tube Tripod with S6Pro Fluid Video Head includes an A2573F Aluminum Single Leg Tripod and a Benro S6Pro Fluid Video Head.

The Benro A2573F Aluminum Single Tube Tripod with S6Pro Fluid Video Head is a versatile system supporting up to 6 kg loads. It has a compact design with single-tube legs, and it features a 65mm flat base that allows moving the head from the tripod directly to sliders, jibs, and other support gear.


Key Features of the Benro A2573F Aluminum Single Tube Tripod with S6Pro Fluid Video Head

  • 6 kg Payload/5+0 Steps Counterbalance
  • 65mm Flat Base with 3/8"-16 Thread
  • Low-Angle 44 to 140 cm Height (2 Stages)
  • Three Leg Positions; Leveling Adapter

 

A2573F Tripod

The A2573F Aluminum Single Leg Tripod is a 2-stage/3-section tripod featuring a flat base centre column. With the head attached, the tripod reaches a maximum height of 180 cm when the column is fully extended. With the column retracted, it stands at approximately 162 cm maximum. The minimum height is 44 cm, which is an advantageous low height that isn't common among most tripods. At this height, you can set up the tripod for low angle shots in time-lapse and other applications. Each leg of the tripod is independently adjustable into three positions. Being able to snap the legs into one of these three positions will let you set up quickly and efficiently. Making things even more efficient, the centre column has a levelling adapter so that you can adjust the position of the fluid head without having to adjust the tripod legs.

The centre column also has a weight hook for sandbags and other loads you can hang off of it for additional stability. The A2573F tripod features rubber and spiked feet for use on virtually all types of terrain.


Key Features of the A2573F Aluminum Single Leg Tripod

  • Maximum height of 180 cm with the S6Pro attached and centre column extended
  • Low-angle minimum height of 44 cm
  • Single-tube legs independently adjustable into three positions
  • Levelling adapter on the end of the centre column
  • Spiked and rubber feet
  • Flip leg locks
  • Aluminium construction

 

S6Pro Fluid Head

The S6Pro head offers 5+0 steps of counterbalance and continuous pan and tilt drag. There are also independent pan and tilt locks. The tilt range is a wide +90/-75°, and the pan range is a full 360°.

Some parts of the head are made of magnesium and other parts of aluminium. Virtually the entire head, including its knobs, is made of robust yet lightweight metal. A pan bar is included that can be attached to a rosette adapter on the left or right side of the head, for left- or right-handed users. A camera plate is included that can be adjusted forward/backward to let you find the optimal balance for your camera. A safety lock on the plate ensures that once mounted, the plate won't slip out if you move it in either direction too much. Two camera screws are supplied—1/4"-20 and 3/8"-16—that can be stored underneath the camera plate on the head itself, in dedicated slots. For attaching accessories, there's a 1/4"-20 threaded hole on each side of the head to which you can secure articulating arms.


Key Features of the S6Pro Fluid Head

  • 6 kg payload
  • 65mm flat base with a 3/8"-16 thread
  • Compatible with 65mm flat base tripods and can be mounted directly on most sliders, jibs, and monopods
  • 5+0 steps of counterbalance
  • Continuous Pan and tilt drag
  • Independent pan and tilt locks
  • +90/-75° tilt range
  • 360° pan range
  • Made of magnesium and aluminium
  • Rosette adapters on the left and right side for attaching the included pan bar
  • Sliding camera plate with safety lock
  • 1/4"-20 and 3/8"-16 camera screws included and can be stored in dedicated spaces on the top of the head, underneath the camera plate
  • Two 1/4"-20 threaded holes for accessories

  • MPN - A2573FS6PRO
  • GTIN - 6931747313006
+ Read more

Camera Plate

Camera Plate Features Sliding Balance Plate
Camera Mounting Screw 1/4"-20 Male
3/8"-16 Male
Safety Lock Yes

Head

Base Mount 3/8"-16 Female
Counter Balance Incremental 5-Step Plus 0
Pan Handle Fittings Rosette x 2 
Bubble Level Illuminated
Accessory Mounting 1/4"-20 Female Thread x 2
Base Diameter 6 cm

Pan & Tilt

Drag Control Pan: Continuous
Tilt: Continuous
Drag Type Fluid
Vertical Tilt +90° to -75°
Panning Range 360°
Independent Pan Lock Yes
Independent Tilt Lock Yes

Legs

Leg Lock Type Flip Lock
Leg Positions 3 Positions
Leg Sections 3
Feet Features Rubber, Spiked

Center Column

Center Column Features Leveling, 3/8"-16 Female Accessory Mount

General

Load Capacity 6 kg
Maximum Working Height 180 cm
Max Height without Center Column 162 cm
Minimum Working Height 44 cm
Materials Aluminum, Magnesium
Weight 4 kg
+ Read more
What’s In The Box
  • Benro A2573F Aluminum Single Tube Tripod with S6Pro Fluid Video Head7
  • A2573F Aluminum Single Leg Tripod
  • Benro S6Pro Fluid Video Head
+ Read more
Write Your Own Review
You're reviewing:Benro Aluminum Single Tube Tripod with S6 Pro Fluid Video Head
Your Rating
+ Read more

You May Also Like

Load More

How About Adding These?

Select All
Total Price: $0.00