Product Description

This Haida 150 Filter Holder Kit is designed to allow for the convenient use of 150mm wide, 2mm thick filters with a Zeiss Distagon T* 15mm f/2.8 (ZE and ZF.2) lens without vignetting.

The kit consists of three main components, a front filter holder, a filter holder adapter ring, and an adapter ring lens collar. Use of the filter holder is easily accomplished by first sliding the filter holder adapter ring over the rear of a Zeiss Distagon T* 15mm f/2.8 (ZE and ZF.2) lens until it has achieved a secure fit. Afterwards, the adapter ring lens collar can also be slid over the rear of the lens. The adapter ring lens collar can then be screwed into the adapter ring to lock both components into place.

Adapter rings are separately available for lenses with 67mm, 72mm, 77mm, 82mm, 95mm, or 105mm front filter threads. After being fitted onto an adapter ring, the filter holder's screw-on locking pin helps to provide a reliable, yet adjustable connection that allows the holder to be rotated 360°, permitting the use of graduated neutral density and other filters that are enhanced by varied positioning. This Haida 150 Filter Holder Kit is pre-installed with one pair of filter slots, a configuration that accommodates one rectangular filter. Also included is a second pair of filter slots and a second set of screws designed to attach both pairs, which allows up to two rectangular filters to be used at the same time.

To prevent stray light, which could have unwanted effects on exposure, from coming in between an installed filter and a connected lens, two gaskets are positioned along the front of the filter holder. These gaskets are designed to form a seal between the pairs of plastic filter slots.

This kit's filter holder can also be used with a Haida filter holder adapter ring for a Nikon AF-S NIKKOR 14-24mm f/2.8G ED, Canon EF 14mm f/2.8L II USM, Sigma 12-24mm f/4.5-5.6 DG HSM II, Rokinon/Samyang 14mm f/2.8 IF ED UMC, Tokina AT-X 16-28mm f/2.8 Pro FX, Canon EF 11-24mm f/4L USM, Tamron SP 15-30mm f/2.8 Di (VC or non-VC) USD, Olympus M.Zuiko Digital ED 7-14mm f/2.8 PRO, Nikon AF NIKKOR 14mm f/2.8D ED, Pentax HD D FA 15-30mm f/2.8 ED SDM WR, Sigma 20mm f/1.4 DG HSM Art, Sigma 12-24mm f/4 DG HSM Art, Samyang XP 14mm f/2.4, Sony FE 12-24mm f/4 G, Sigma 14mm f/1.8 DG HSM Art, or Sigma 14-24mm f/2.8 DG HSM Art lens.

  • Allows filters to be conveniently used with a Zeiss Distagon T* 15mm f/2.8 (ZE and ZF.2) lens without vignetting
  • Holds 150mm wide, 2mm thick filters
  • Preconfigured to hold one rectangular filter and can accommodate up to two rectangular filters
  • Screw-on locking pin allows for adjustment of filter holder's grip for 360° rotation on adapter ring
  • Gaskets help to prevent stray light, which could have unwanted effects on exposure, from coming in between an installed filter and a connected lens
  • Separately available aluminum-alloy adapter rings for lenses with 67mm, 72mm, 77mm, 82mm, 95mm, or 105mm front filter threads
  • Filter holder can also be used with a Haida filter holder adapter ring for a Nikon AF-S NIKKOR 14-24mm f/2.8G ED, Canon EF 14mm f/2.8L II USM, Sigma 12-24mm f/4.5-5.6 DG HSM II, Rokinon/Samyang 14mm f/2.8 IF ED UMC, Tokina AT-X 16-28mm f/2.8 Pro FX, Canon EF 11-24mm f/4L USM, Tamron SP 15-30mm f/2.8 Di (VC or non-VC) USD, Olympus M.Zuiko Digital ED 7-14mm f/2.8 PRO, Nikon AF NIKKOR 14mm f/2.8D ED, Pentax HD D FA 15-30mm f/2.8 ED SDM WR, Sigma 20mm f/1.4 DG HSM Art, Sigma 12-24mm f/4 DG HSM Art, Samyang XP 14mm f/2.4, Sony FE 12-24mm f/4 G, Sigma 14mm f/1.8 DG HSM Art, or Sigma 14-24mm f/2.8 DG HSM Art lens

 

  • MPN - HD150-3103
  • GTIN  6900574603031
Read More

Haida Zeiss Distagon T15 f2.8 Super wide Filter Holder Set

Shipped by: digiDirect
SKU
130348
Price Slashed $54.95
digiDirect Price
$27.48
$27.47 Off
Sydney CBD Unavailable
Melbourne CBD Unavailable
Brisbane Unavailable
Miranda Unavailable
Cannington Unavailable
Bondi Junction Unavailable
Parramatta Unavailable
test Unavailable
LatitudePay
$54.95
PAYMENT OPTIONS
Earn 27 Qantas Points until 30 September 2023

Frequently Bought With

Select All
Total Price: $0.00

Looking for more? Explore digiMarket

Discover More

Load More

People Who Viewed This Item Also Viewed

Load More

Product Overview

  • For Zeiss Distagon T* 15mm f/2.8
  • Haida 150 Filter Holder
  • For Filters 150mm Wide, 2mm Thick
  • Holds up to 2 Rectangular Filters
  • Rotates 360°
  • Gaskets for Light-Blocking Seals
  • Adapter Ring and Lens Collar
  • Secure Attachment to Lens
  • Easy Installation
  • Aluminum-Alloy Construction
+ Read more

This Haida 150 Filter Holder Kit is designed to allow for the convenient use of 150mm wide, 2mm thick filters with a Zeiss Distagon T* 15mm f/2.8 (ZE and ZF.2) lens without vignetting.

The kit consists of three main components, a front filter holder, a filter holder adapter ring, and an adapter ring lens collar. Use of the filter holder is easily accomplished by first sliding the filter holder adapter ring over the rear of a Zeiss Distagon T* 15mm f/2.8 (ZE and ZF.2) lens until it has achieved a secure fit. Afterwards, the adapter ring lens collar can also be slid over the rear of the lens. The adapter ring lens collar can then be screwed into the adapter ring to lock both components into place.

Adapter rings are separately available for lenses with 67mm, 72mm, 77mm, 82mm, 95mm, or 105mm front filter threads. After being fitted onto an adapter ring, the filter holder's screw-on locking pin helps to provide a reliable, yet adjustable connection that allows the holder to be rotated 360°, permitting the use of graduated neutral density and other filters that are enhanced by varied positioning. This Haida 150 Filter Holder Kit is pre-installed with one pair of filter slots, a configuration that accommodates one rectangular filter. Also included is a second pair of filter slots and a second set of screws designed to attach both pairs, which allows up to two rectangular filters to be used at the same time.

To prevent stray light, which could have unwanted effects on exposure, from coming in between an installed filter and a connected lens, two gaskets are positioned along the front of the filter holder. These gaskets are designed to form a seal between the pairs of plastic filter slots.

This kit's filter holder can also be used with a Haida filter holder adapter ring for a Nikon AF-S NIKKOR 14-24mm f/2.8G ED, Canon EF 14mm f/2.8L II USM, Sigma 12-24mm f/4.5-5.6 DG HSM II, Rokinon/Samyang 14mm f/2.8 IF ED UMC, Tokina AT-X 16-28mm f/2.8 Pro FX, Canon EF 11-24mm f/4L USM, Tamron SP 15-30mm f/2.8 Di (VC or non-VC) USD, Olympus M.Zuiko Digital ED 7-14mm f/2.8 PRO, Nikon AF NIKKOR 14mm f/2.8D ED, Pentax HD D FA 15-30mm f/2.8 ED SDM WR, Sigma 20mm f/1.4 DG HSM Art, Sigma 12-24mm f/4 DG HSM Art, Samyang XP 14mm f/2.4, Sony FE 12-24mm f/4 G, Sigma 14mm f/1.8 DG HSM Art, or Sigma 14-24mm f/2.8 DG HSM Art lens.

  • Allows filters to be conveniently used with a Zeiss Distagon T* 15mm f/2.8 (ZE and ZF.2) lens without vignetting
  • Holds 150mm wide, 2mm thick filters
  • Preconfigured to hold one rectangular filter and can accommodate up to two rectangular filters
  • Screw-on locking pin allows for adjustment of filter holder's grip for 360° rotation on adapter ring
  • Gaskets help to prevent stray light, which could have unwanted effects on exposure, from coming in between an installed filter and a connected lens
  • Separately available aluminum-alloy adapter rings for lenses with 67mm, 72mm, 77mm, 82mm, 95mm, or 105mm front filter threads
  • Filter holder can also be used with a Haida filter holder adapter ring for a Nikon AF-S NIKKOR 14-24mm f/2.8G ED, Canon EF 14mm f/2.8L II USM, Sigma 12-24mm f/4.5-5.6 DG HSM II, Rokinon/Samyang 14mm f/2.8 IF ED UMC, Tokina AT-X 16-28mm f/2.8 Pro FX, Canon EF 11-24mm f/4L USM, Tamron SP 15-30mm f/2.8 Di (VC or non-VC) USD, Olympus M.Zuiko Digital ED 7-14mm f/2.8 PRO, Nikon AF NIKKOR 14mm f/2.8D ED, Pentax HD D FA 15-30mm f/2.8 ED SDM WR, Sigma 20mm f/1.4 DG HSM Art, Sigma 12-24mm f/4 DG HSM Art, Samyang XP 14mm f/2.4, Sony FE 12-24mm f/4 G, Sigma 14mm f/1.8 DG HSM Art, or Sigma 14-24mm f/2.8 DG HSM Art lens

 

  • MPN - HD150-3103
  • GTIN  6900574603031
+ Read more
NameValue
RotatingYes, 360
MaterialFilter Holder Plate: Aluminum alloy
Filter Holder Slots: Plastic Filter Holder
Adapter Ring: Aluminum alloy
Adapter Ring Lens Collar: Aluminum alloy
Weight216.0 g
CompatibilityFilter Holder Plate: Haida 150 adapter ring for a Zeiss Distagon T* 15mm f/2.8 (ZE and ZF.2), Nikon AF-S NIKKOR 14-24mm f/2.8G ED, Canon EF 14mm f/2.8L II USM, Sigma 12-24mm f/4.5-5.6 DG HSM II, Rokinon/Samyang 14mm f/2.8 IF ED UMC, Tokina AT-X 16-28mm f/2.8 Pro FX, Canon EF 11-24mm f/4L USM, Tamron SP 15-30mm f/2.8 Di (VC or non-VC) USD, Olympus M.Zuiko Digital ED 7-14mm f/2.8 PRO, Nikon AF NIKKOR 14mm f/2.8D ED, Pentax HD D FA 15-30mm f/2.8 ED SDM WR, Sigma 20mm f/1.4 DG HSM Art, Sigma 12-24mm f/4 DG HSM Art, Samyang XP 14mm f/2.4, Sony FE 12-24mm f/4 G, Sigma 14mm f/1.8 DG HSM Art, or Sigma 14-24mm f/2.8 DG HSM Art lens
Haida 150 adapter ring for lenses with 67mm, 72mm, 77mm, 82mm, 95mm, or 105mm front filter threads

Adapter Ring: Haida 150 adapter ring lens collar for Rokinon/Samyang 14mm Ultra Wide-Angle f/2.8 IF ED UMC lens

Adapter Ring Lens Collar: Rokinon/Samyang 14mm Ultra Wide-Angle f/2.8 IF ED UMC lens

Accepts up to two rectangular filters (150mm wide, 2mm thick)
Dimensions165.0 x 150.0 x 41.0 mm
+ Read more
What’s In The Box
 

 

Haida 150 Filter Holder Kit for Zeiss Distagon T15 f2.8 for Super Wide Angle

  • Filter Holder
  • Adapter Ring
  • Lens Collar
  • Filter Slots x 4
  • Screws for up to One Pair of Filter Slots x 4
  • Screws for up to Two Pairs of Filter Slots x 4

 

+ Read more
Write Your Own Review
You're reviewing:Haida Zeiss Distagon T15 f2.8 Super wide Filter Holder Set
Your Rating
+ Read more

You May Also Like

Load More

How About Adding These?

Select All
Total Price: $0.00