Audio-Technica AT875R Broadcast & Production Short Shotgun Microphone

Quality Sound

Being less than 7" long, the AT875R is equally at home on a boompole or atop a camera. It uses an interference tube and a supercardioid polar pattern to yield focused on-axis directionality while attenuating rear-entry sound and rejecting sound at the sides. This makes the AT875R far more effective at capturing distant sources than the omnidirectional mics found in most cameras. Its 90 Hz to 20 kHz frequency response naturally reduces problematic bass frequencies from common sources such as traffic rumble and wind noise.

11 to 52 VDC Phantom Powered

With a balanced 3-pin XLR output and support for 11 to 52 VDC phantom powering, the AT875R is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters as well as built-in preamps on many camcorders and cinema cameras.

Ideal for Boompole Mounting

The AT875R includes a mic clip for easy placement on a mic stand or boompole. Alternatively, mount the AT875R in the Audio-Technica AT8415 shockmount (available separately) to impede the transfer of vibrations between your boompole and the mic. The AT875R also includes two rubber O-rings that expand the microphone's diameter to fit the larger mic holders found on many high-end cameras.

Windscreen Minimizes Wind Noise

The AT875R has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. Enhanced attenuation of wind noise is possible with the addition of an optional windshield such as the Rycote 12 cm Super-Softie, which also provides high immunity to rain.

For maximum reduction of handling noise and wind noise in indoor or outdoor environments, consider the separately available Rycote Windshield Kit 3, a complete windjammer, windshield, and shockmount suspension system.