The store will not work correctly in the case when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies.Learn more.
The Z CAM E2-F8 EF Mount Full Frame 8K Cinema Camera enables you to shoot professional high-definition cinema footage, featuring a full-frame sensor with 10-bit 4:2:2 colour support and nominal 14 stops of dynamic range. It further supports timecode, shoots up to 8K at up to 30 fps, and records data up to 300 Mb/s onto CFast 2.0 media.
Supported recording formats include ZRAW format, which supports 12-bit, MOV and MP4 using H.265 for 10-bit recording, and H.264 which supports 8-bit recording. Its HDMI 2.0 port supports 4K60, 10-bit 4:2:2 video output. Audio is recorded in 24-bit 48 kHz using AAC or PCM (PCM for MOV format only) through its 3.5mm stereo jack or via a separately available XLR connector using its 5-pin LEMO port.
Firmware 0.88 allows the Z Cam E2-F8 camera to record raw format video in Z Cam's ZRAW format. The camera can record time-lapse, slow motion, and can even live stream via its Gigabit Ethernet port. You can also control it locally by the buttons along the side of the camera.
The E2-F8 features serial ports, a 2.5mm LANC connector, a USB Type-C port, Ethernet port. Additionally, it can be controlled via Wi-Fi through the Z Camera iOS app. The camera features a 12 VDC 2-pin LEMO power output to provide power to separately available accessories. Additionally, the camera can be powered by a separately available battery using the built-in L-series battery mount, or you can power the camera using a separately available power adapter using its 2-pin LEMO port.
Key Features of the Z CAM E2-F8 EF Mount Full Frame 8K Cinema Camera
12-Bit ProRes RAW recording over HDMI to the Ninja V 5” HDR monitor-recorder (optional)
8K resolution
Full Frame CMOS sensor
Dual native ISO
ZRAW supported
EF mount (with optional M, MFT, and PL mount accessory)*
Gigabit Ethernet for data, control & live preview
3.5mm Mic Input, Built-In Microphone, Interchangeable Lens, Time Code I/O
Uses CFast 2.0 Cards for internal recording
* eND module (optional accessory, not included) slot is supported on EF & PL lens mount
8K Capture and Recording
Unburdened by a recording time limit, you can record 8K at up to 30 fps for up to the limit of your recording media's capacity
CMOS sensor with 14 stops of dynamic range
The camera supports ZRAW, REC. 709, Z-Log2, FLAT, and HLG
ZRAW supports 12-bit recording
H.265 (10-bit colour) internal recording on CFast 2.0 cards
4K60, 10-bit 4:2:2 video output through HDMI 2.0 is supported
Full-metal housing for efficient heat dissipation
Firmware 0.98
All resolution and frame rate combinations now support ProRes 422 recording (except C8K 2.4:1)
ProRes proxy records in separate files
Preview and in-camera playback with 3D LUT banding issue is fixed
External SSD recording through USB performance is improved
UVC (USB camera) bug fixes
Camera Body
Made from aluminium for strength and heat dissipation
2-pin LEMO 12 VDC power output
Powers from a separately available power adapter or optional L-series batteries
Interfaces and Expandability
USB 3.0 Type-C for camera control and data transformation only
Two serial ports for camera control
Ethernet port for live view, control, and file transfer to a browser or a computer running Z CAM software
LANC port for remote control including power on/off
Camera Settings
White balance: Auto, preset, manual (2300 to 7500K)
iOS App Z Camera is a mobile application for camera live preview and control through 5G or 802.11n Wi-Fi. It allows you to start/stop recording and adjust the camera settings remotely, and also has advanced features on a camera live preview.
The Z CAM E2-F8 EF Mount Full Frame 8K Cinema Camera enables you to shoot professional high-definition cinema footage, featuring a full-frame sensor with 10-bit 4:2:2 colour support and nominal 14 stops of dynamic range. It further supports timecode, shoots up to 8K at up to 30 fps, and records data up to 300 Mb/s onto CFast 2.0 media.
Supported recording formats include ZRAW format, which supports 12-bit, MOV and MP4 using H.265 for 10-bit recording, and H.264 which supports 8-bit recording. Its HDMI 2.0 port supports 4K60, 10-bit 4:2:2 video output. Audio is recorded in 24-bit 48 kHz using AAC or PCM (PCM for MOV format only) through its 3.5mm stereo jack or via a separately available XLR connector using its 5-pin LEMO port.
Firmware 0.88 allows the Z Cam E2-F8 camera to record raw format video in Z Cam's ZRAW format. The camera can record time-lapse, slow motion, and can even live stream via its Gigabit Ethernet port. You can also control it locally by the buttons along the side of the camera.
The E2-F8 features serial ports, a 2.5mm LANC connector, a USB Type-C port, Ethernet port. Additionally, it can be controlled via Wi-Fi through the Z Camera iOS app. The camera features a 12 VDC 2-pin LEMO power output to provide power to separately available accessories. Additionally, the camera can be powered by a separately available battery using the built-in L-series battery mount, or you can power the camera using a separately available power adapter using its 2-pin LEMO port.
Key Features of the Z CAM E2-F8 EF Mount Full Frame 8K Cinema Camera
12-Bit ProRes RAW recording over HDMI to the Ninja V 5” HDR monitor-recorder (optional)
8K resolution
Full Frame CMOS sensor
Dual native ISO
ZRAW supported
EF mount (with optional M, MFT, and PL mount accessory)*
Gigabit Ethernet for data, control & live preview
3.5mm Mic Input, Built-In Microphone, Interchangeable Lens, Time Code I/O
Uses CFast 2.0 Cards for internal recording
* eND module (optional accessory, not included) slot is supported on EF & PL lens mount
8K Capture and Recording
Unburdened by a recording time limit, you can record 8K at up to 30 fps for up to the limit of your recording media's capacity
CMOS sensor with 14 stops of dynamic range
The camera supports ZRAW, REC. 709, Z-Log2, FLAT, and HLG
ZRAW supports 12-bit recording
H.265 (10-bit colour) internal recording on CFast 2.0 cards
4K60, 10-bit 4:2:2 video output through HDMI 2.0 is supported
Full-metal housing for efficient heat dissipation
Firmware 0.98
All resolution and frame rate combinations now support ProRes 422 recording (except C8K 2.4:1)
ProRes proxy records in separate files
Preview and in-camera playback with 3D LUT banding issue is fixed
External SSD recording through USB performance is improved
UVC (USB camera) bug fixes
Camera Body
Made from aluminium for strength and heat dissipation
2-pin LEMO 12 VDC power output
Powers from a separately available power adapter or optional L-series batteries
Interfaces and Expandability
USB 3.0 Type-C for camera control and data transformation only
Two serial ports for camera control
Ethernet port for live view, control, and file transfer to a browser or a computer running Z CAM software
LANC port for remote control including power on/off
Camera Settings
White balance: Auto, preset, manual (2300 to 7500K)
iOS App Z Camera is a mobile application for camera live preview and control through 5G or 802.11n Wi-Fi. It allows you to start/stop recording and adjust the camera settings remotely, and also has advanced features on a camera live preview.
H.265/MOV/MP4 4:2:0 10-Bit: 8192 x 3456p at 30 fps (300 Mb/s) 7680 x 4320p at 30 fps (300 Mb/s) 6144 x 3240p at 30 fps (300 Mb/s) 5760 x 3240p at 30 fps (300 Mb/s) 3840 x 2160p at 72 fps (300 Mb/s) H.264/MOV/MP4 4:2:0 8-Bit: 8192 x 3456p at 30 fps (300 Mb/s) 7680 x 4320p at 30 fps (300 Mb/s) 6144 x 3240p at 30 fps (300 Mb/s) 5760 x 3240p at 30 fps (300 Mb/s) 3840 x 2160p at 30 fps (300 Mb/s)
1 x 1/8" / 3.5 mm Stereo Input 1 x 5-Pin LEMO Input 1 x 1/8" / 3.5 mm Stereo Output
Other I/O
1 x USB Type-C Camera Interface Data, Control Input/Output 1 x 2.5 mm LANC Control Input 1 x RJ45 GIG-E 1000BASE-T, LAN Data, Control, Monitor Input/Output 2 x 4-Pin LEMO Camera Interface Control Input/Output
Wireless Interfaces
2.4 GHz, 5 GHz Wi-Fi Control
Display
Display Type
Fixed LCD
Size
1.3"
EVF
EVF
Optional, Not Included
Power
Battery Type
Sony L-Series
Power Connectors
1 x 2-Pin LEMO (12 VDC) Input 1 x 2-Pin LEMO (12 VDC) Output
