Click & Collect Store Locator Questions? CALL US 1300 889 148 GIFT CARDS SERVICES
Photolab Account
0
My Cart
Product Description

This grey 3 Legged Thing Tripod Kit includes a grey Albert 2.0 Tripod and grey AirHed Pro Ball Head. Together, the tripod and ball head form a support system that features three detachable legs and a removable centre column. With the ball head, each leg can be configured as a monopod with up to a 134 cm height or can be combined with the centre column to form a monopod with up to 198 cm in height.

Tripod heads such as the AirHed Pro Ball Head that are compatible with a 3/8"-16 mount can be connected to the top of the Albert 2.0 Tripod. When combined and configured as a tripod, the Albert 2.0 Tripod and AirHed Pro Ball Head support up to 66.0 lb and measures 43 cm when folded. Each of the tripod's 5-section legs features an independent spread, a 3-position angle lock, and twist locks for rapid deployment. The Albert 2.0 Tripod and AirHed Pro Ball Head can be set at a minimum height of 19 cm when the tripod's 3-section, push-and-pull rapid centre column is removed. Together, the three legs can be extended to obtain a maximum height of 132 x 190 cm with the centre column fully raised along with the ball head. Each of the carbon fibre legs includes a removable rubber foot, which can be substituted with separately available spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil.

For added versatility, the Albert 2.0 Tripod's three removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a tabletop tripod. A carry bag with a strap is provided for storage and transport.

The AirHed Pro Ball Head is an Arca-type ball head with a load capacity of 88.0 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included QR-OCTA Quick Release Plate. The quick-release plate can be attached or removed from the integrated clamp located at the top of the head's ball-and-socket joint by tightening or loosening the clamp's knurled, locking knob. Dual retaining screws are included for use along the underside of the plate. These screws prevent the plate from accidentally sliding off the ball head when the clamp is opened. The quick-release plate features a rubberized, non-slip platform while a built-in bubble level along the edge of the clamp opposite the clamp's locking knob accommodates landscape orientations. By loosening the ball head's ad 360°.


Key Features of the 3 Legged Thing - Pro 2.0 Albert & AirHed Pro Grey

  • 3 detachable legs that enable conversion to a monopod, boom arm or table-top tripod
  • Knurled leg caps and collar for improved grip and leverage
  • Patented Tri-Mount plate for easier use, with hollowed spurs for clip-on devices
  • D-Ring & Toolz assembly in place of the traditional spring hook
  • 1/4" / 3/8" Screw foot, with multiple accessory options
  • Precision engineered leg lock system for greater stability and rigidity
  • 30kg of Load Capability
  • 100% Pure, 8 layer Carbon Fibre construction for greater durability

3 Detachable Legs

Each of the new Pro Range 2.0 tripods feature 3 detachable legs that enable the user to reconfigure their tripod into an incredibly stable monopod and/or boom arm. Additionally, all 3 legs can be removed and replaced with 3 Legged Thing's range of footwear to create a tabletop or low-level tripod.

Knurled Lock Caps

The advanced and innovative Pro Range 2.0 now features knurled lock caps and collar for improved grip and leverage.

The AirHed Pro and AirHed Pro-Lever available in kits or individually also feature knurling on the control knobs for improved precision and grip.

New Leg Lock Engineering

The locks have been re-engineered with a new design of Chicken Lips (shims) which improve strength and create an unprecedented level of stability making them the most rigid, functional and stable tripods we've ever produced.

Albert 2.0 is also available as a kit, complete with AirHed Pro and QR-Octa quick release plate.

AirHed Pro Ball Head

The AirHed Pro features a knurled knob that is used to control the ball head. The ball can be tightened into a variety of positions, and the entire head can be rotated 360 Degree on its base. The copper control knob tightens the clamp, so users can ensure their camera is held securely in place. The head features a bubble level, ensuring pictures are all perfectly aligned.

Tripod and Ball Head

  • The area-type ball head and carbon-fibre tripod with 3/8"-16 mount
  • Tripod features three detachable legs and a removable centre column
  • With a ball head, each leg can be configured as a monopod with up to a 135 cm height or can be combined with the centre column to form a monopod with up to 198 cm height
  • Tripod configuration with a ball head, supports up to 30 kg Push-and-pull centre column for rapid camera, lens, or sport optic positioning
  • Center column D-ring to accommodate ballast for additional stability
  • Can be set for a minimum height of 57 x 19 cm without the centre column
  • With a ball head, all three legs can be extended in the tripod configuration to obtain a maximum height of 132 x 190 cm with the centre column fully raised
  • The Center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them
  • Legs each feature 5 sections with twist locks for rapid deployment and can be independently spread
  • Legs can be locked at 23, 55, or 80° angles
  • Rubber feet help to enhance stability on a wide variety of surfaces
  • Weighs 2.17 kg and measures 7 cm when all three legs are reversed 180° and folded
  • Rubber feet can be removed and substituted with separately available 3 Legged Thing spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil
  • Removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a table-top tripod
  • 3 Legged Thing Toolz multi-tool to adjust miscellaneous component screws
  • Ball head microfiber bag
  • Tripod kit carry bag with a strap for storage and transport

AirHed Pro Ball Head

  • Arca-type ball head with 88 lb load capacity
  • Compatible with tripods or support systems that feature a 3/8"-16 mount
  • Uses ball-and-socket joint to help maximize pan-and-tilt flexibility
  • The ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place
  • Large primary locking knob with knurled surface allows ball-and-socket joint to be quickly swivelled, angled, fully tilted, or returned to its upright position
  • A secondary locking knob with knurled surface allows the head to rotate 360°
  • Integrated clamp on top of the ball-and-socket joint is compatible with included QR-OCTA Quick Release Plate
  • Knurled locking knob for integrated clamp secures compatible Arca-type quick release plates
  • Built-in bubble level along the edge of the clamp opposite the clamp's locking knob accommodates landscape orientations
  • Durable magnesium alloy construction

QR-OCTA Quick Release Plate

  • Compatible with Arca-type quick release clamps
  • 1/4"-20 mount
  • Dual retaining screws along the underside of the plate prevent the plate from accidentally sliding off the AirHed Pro Ball Head
  • Durable, aluminium alloy construction

  • MPN - 3LT-ALBERTKITGREY2
  • GTIN - 5060244885493
Read More

3 Legged Thing - Pro 2.0 Albert & AirHed Pro Grey

Shipped by: digiDirect
SKU
134235
Be the first to review this product
Original Price $829.00
digiDirect Price
$707.00
LatitudePay
$829.00
AWAITING STOCK
This means item is within an estimated 2 weeks from delivery to digiDirect. For the latest ETA, please click here to contact us.
PAYMENT OPTIONS
0% Interest for 6 Months APPLY NOW!
Earn 707 Qantas Points until 30 September 2023
Add to Wishlist
Pricematch
Product Overview

  • 3 detachable legs that enable conversion to a monopod, boom arm or table-top tripod
  • Knurled leg caps and collar for improved grip and leverage
  • Patented Tri-Mount plate for easier use, with hollowed spurs for clip-on devices
  • D-Ring & Toolz assembly in place of the traditional spring hook
  • 1/4" / 3/8" Screw foot, with multiple accessory options
  • Precision engineered leg lock system for greater stability and rigidity
  • 30kg of Load Capability
  • 100% Pure, 8 layer Carbon Fibre construction for greater durability
+ Read more

This grey 3 Legged Thing Tripod Kit includes a grey Albert 2.0 Tripod and grey AirHed Pro Ball Head. Together, the tripod and ball head form a support system that features three detachable legs and a removable centre column. With the ball head, each leg can be configured as a monopod with up to a 134 cm height or can be combined with the centre column to form a monopod with up to 198 cm in height.

Tripod heads such as the AirHed Pro Ball Head that are compatible with a 3/8"-16 mount can be connected to the top of the Albert 2.0 Tripod. When combined and configured as a tripod, the Albert 2.0 Tripod and AirHed Pro Ball Head support up to 66.0 lb and measures 43 cm when folded. Each of the tripod's 5-section legs features an independent spread, a 3-position angle lock, and twist locks for rapid deployment. The Albert 2.0 Tripod and AirHed Pro Ball Head can be set at a minimum height of 19 cm when the tripod's 3-section, push-and-pull rapid centre column is removed. Together, the three legs can be extended to obtain a maximum height of 132 x 190 cm with the centre column fully raised along with the ball head. Each of the carbon fibre legs includes a removable rubber foot, which can be substituted with separately available spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil.

For added versatility, the Albert 2.0 Tripod's three removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a tabletop tripod. A carry bag with a strap is provided for storage and transport.

The AirHed Pro Ball Head is an Arca-type ball head with a load capacity of 88.0 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included QR-OCTA Quick Release Plate. The quick-release plate can be attached or removed from the integrated clamp located at the top of the head's ball-and-socket joint by tightening or loosening the clamp's knurled, locking knob. Dual retaining screws are included for use along the underside of the plate. These screws prevent the plate from accidentally sliding off the ball head when the clamp is opened. The quick-release plate features a rubberized, non-slip platform while a built-in bubble level along the edge of the clamp opposite the clamp's locking knob accommodates landscape orientations. By loosening the ball head's ad 360°.


Key Features of the 3 Legged Thing - Pro 2.0 Albert & AirHed Pro Grey

  • 3 detachable legs that enable conversion to a monopod, boom arm or table-top tripod
  • Knurled leg caps and collar for improved grip and leverage
  • Patented Tri-Mount plate for easier use, with hollowed spurs for clip-on devices
  • D-Ring & Toolz assembly in place of the traditional spring hook
  • 1/4" / 3/8" Screw foot, with multiple accessory options
  • Precision engineered leg lock system for greater stability and rigidity
  • 30kg of Load Capability
  • 100% Pure, 8 layer Carbon Fibre construction for greater durability

3 Detachable Legs

Each of the new Pro Range 2.0 tripods feature 3 detachable legs that enable the user to reconfigure their tripod into an incredibly stable monopod and/or boom arm. Additionally, all 3 legs can be removed and replaced with 3 Legged Thing's range of footwear to create a tabletop or low-level tripod.

Knurled Lock Caps

The advanced and innovative Pro Range 2.0 now features knurled lock caps and collar for improved grip and leverage.

The AirHed Pro and AirHed Pro-Lever available in kits or individually also feature knurling on the control knobs for improved precision and grip.

New Leg Lock Engineering

The locks have been re-engineered with a new design of Chicken Lips (shims) which improve strength and create an unprecedented level of stability making them the most rigid, functional and stable tripods we've ever produced.

Albert 2.0 is also available as a kit, complete with AirHed Pro and QR-Octa quick release plate.

AirHed Pro Ball Head

The AirHed Pro features a knurled knob that is used to control the ball head. The ball can be tightened into a variety of positions, and the entire head can be rotated 360 Degree on its base. The copper control knob tightens the clamp, so users can ensure their camera is held securely in place. The head features a bubble level, ensuring pictures are all perfectly aligned.

Tripod and Ball Head

  • The area-type ball head and carbon-fibre tripod with 3/8"-16 mount
  • Tripod features three detachable legs and a removable centre column
  • With a ball head, each leg can be configured as a monopod with up to a 135 cm height or can be combined with the centre column to form a monopod with up to 198 cm height
  • Tripod configuration with a ball head, supports up to 30 kg Push-and-pull centre column for rapid camera, lens, or sport optic positioning
  • Center column D-ring to accommodate ballast for additional stability
  • Can be set for a minimum height of 57 x 19 cm without the centre column
  • With a ball head, all three legs can be extended in the tripod configuration to obtain a maximum height of 132 x 190 cm with the centre column fully raised
  • The Center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them
  • Legs each feature 5 sections with twist locks for rapid deployment and can be independently spread
  • Legs can be locked at 23, 55, or 80° angles
  • Rubber feet help to enhance stability on a wide variety of surfaces
  • Weighs 2.17 kg and measures 7 cm when all three legs are reversed 180° and folded
  • Rubber feet can be removed and substituted with separately available 3 Legged Thing spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil
  • Removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a table-top tripod
  • 3 Legged Thing Toolz multi-tool to adjust miscellaneous component screws
  • Ball head microfiber bag
  • Tripod kit carry bag with a strap for storage and transport

AirHed Pro Ball Head

  • Arca-type ball head with 88 lb load capacity
  • Compatible with tripods or support systems that feature a 3/8"-16 mount
  • Uses ball-and-socket joint to help maximize pan-and-tilt flexibility
  • The ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place
  • Large primary locking knob with knurled surface allows ball-and-socket joint to be quickly swivelled, angled, fully tilted, or returned to its upright position
  • A secondary locking knob with knurled surface allows the head to rotate 360°
  • Integrated clamp on top of the ball-and-socket joint is compatible with included QR-OCTA Quick Release Plate
  • Knurled locking knob for integrated clamp secures compatible Arca-type quick release plates
  • Built-in bubble level along the edge of the clamp opposite the clamp's locking knob accommodates landscape orientations
  • Durable magnesium alloy construction

QR-OCTA Quick Release Plate

  • Compatible with Arca-type quick release clamps
  • 1/4"-20 mount
  • Dual retaining screws along the underside of the plate prevent the plate from accidentally sliding off the AirHed Pro Ball Head
  • Durable, aluminium alloy construction

  • MPN - 3LT-ALBERTKITGREY2
  • GTIN - 5060244885493
+ Read more

Head

Head Type Ball Head
Base Mount 3/8"-16 Female
Camera Mounting Screw 1/4"-20 Male
Quick Release Plate Type Arca-Type
Number of Bubble Levels 1
Friction Control No
Independent Pan Lock Yes
Ball Sphere Diameter 1.18" / 30 mm

Pan & Tilt Range

Vertical Tilt 90°
Panning Range 360°

General

Load Capacity 66 lb / 29.94 kg
Maximum Working Height 75.1" / 190.8 cm
Max Height without Center Column 52.1" / 132.33 cm
Minimum Working Height 7.8" / 19.8 cm
Folded Length 16.9" / 42.93 cm
Materials Carbon Fiber
Weight 4.8 lb / 2.18 kg

Legs

Leg Lock Type Twist-Lock
Leg Positions 3 Positions
Independent Leg Spread Yes
Leg Sections 5
Leg Diameter 1.02" / 25.91 mm
0.90" / 22.86 mm
0.79" / 20.07 mm
0.67" / 17.02 mm
0.55" / 13.97 mm
Bubble Level Yes
Feet Features Rubber, Removable

Detachable Monopod

Maximum Working Height 78.1" / 198.37 cm
Leg Sections 5
Monopod Foot Features Removable, Rubber

Center Column

Center Column Features Removable, Reversible, 3/8"-16 Female Accessory Mount
Center Column Shape Round
Center Column Sections 3
Center Column Extension Type Rapid
Center Column Diameter 1.02" / 25.9 mm
0.9" / 22.9 mm
0.79" / 20.1 mm
Lateral / 90-Degree Center Column No
+ Read more
What’s In The Box
  • 3 Legged Thing - Pro 2.0 Albert & AirHed Pro Grey
  • 3 Legged Thing Albert 2.0 Tripod (Grey)
  • 3 Legged Thing AirHed Pro Ball Head (Grey)
  • Microfiber Bag
+ Read more
FAQs

1. What is the weight limit for the 3 Legged Thing Pro 2.0 Albert tripod?

The weight limit for the Pro 2.0 Albert tripod is 50 lbs (22.7 kg). This means it can support a variety of camera gear, including heavy DSLR cameras and lenses.

2. Does the 3 Legged Thing Pro 2.0 Albert come with a ball head?

Yes, the Pro 2.0 Albert comes with the AirHed Pro ball head, which features an Arca Swiss compatible quick release plate and a load capacity of 88 lbs (40 kg).

3. Is the 3 Legged Thing Pro 2.0 Albert tripod suitable for outdoor use?

Yes, the Pro 2.0 Albert is designed for outdoor use and is made of durable materials such as magnesium alloy. It also has rubber feet for added stability on various surfaces and weather-resistant features such as twist locks for the legs.

4. Can the height of the tripod be adjusted?

Yes, the legs of the Pro 2.0 Albert can be adjusted to three different angles and the center column can be extended for a maximum height of 82.2 inches (209 cm). The tripod also has a minimum height of 5.3 inches (13.5 cm) for low angle shots.

5. How portable is the 3 Legged Thing Pro 2.0 Albert?

The Pro 2.0 Albert tripod weighs 4.8 lbs (2.2 kg) and can be folded down to a compact size of 16.9 inches (43 cm). It also comes with a carry case for easy transportation.

6. Does the 3 Legged Thing Pro 2.0 Albert have a hook for adding weight?

Yes, the tripod features a detachable hook at the bottom of the center column for adding weight to increase stability in windy conditions or when using heavier camera equipment.

7. What is the warranty period for the 3 Legged Thing Pro 2.0 Albert?

The Pro 2.0 Albert comes with a 5-year warranty against manufacturing defects. This warranty can be extended to 10 years upon registration on the 3 Legged Thing website.

8. Does the tripod come with a tripod head release plate?

Yes, the Pro 2.0 Albert comes with a removable and reversible tripod head release plate for quickly attaching and detaching your camera from the ball head.

9. Can the legs of the tripod be spread out for low angle shots?

Yes, the legs of the Pro 2.0 Albert can be spread out to three different angles – 23°, 55°, and 80°, allowing for low angle shots and increased stability on uneven terrain.

10. Is the 3 Legged Thing Pro 2.0 Albert compatible with other tripod heads?

Yes, the Pro 2.0 Albert has a standard 3/8”-16 thread on the detachable tripod head platform, making it compatible with a wide range of tripod heads from other brands.

+ Read more
Write Your Own Review
You're reviewing:3 Legged Thing - Pro 2.0 Albert & AirHed Pro Grey
Your Rating
+ Read more