We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The Stereo VideoMic Pro Rycote from Rode builds on the success of the Stereo VideoMic Pro with a few improved upgrades such as a Rycote Lyre shockmount, higher-sensitivity X/Y capsules, denser foam windscreen, better RF shielding, and a thicker Kevlar braided cable. The microphone retains all of the switch locations and other features as the previous model, for use as an on-camera DSLR and camcorder microphone for video applications.
The integrated Rycote Lyre shockmount system protects against handling noise. The Stereo VideoMic features a high-pass filter switch at 75 Hz for minimizing low-frequency noise, and a -10 dB pad for maximizing headroom on behalf of capturing loud signals without distortion. The +20 dB level-boost switch is specifically designed to provide a higher-quality signal with DSLR cameras. When activated, the camera preamp level is reduced, resulting in a lower noise floor and a much clearer recording.
The Stereo VideoMic Pro Rycote from Rode builds on the success of the Stereo VideoMic Pro with a few improved upgrades such as a Rycote Lyre shockmount, higher-sensitivity X/Y capsules, denser foam windscreen, better RF shielding, and a thicker Kevlar braided cable. The microphone retains all of the switch locations and other features as the previous model, for use as an on-camera DSLR and camcorder microphone for video applications.
The integrated Rycote Lyre shockmount system protects against handling noise. The Stereo VideoMic features a high-pass filter switch at 75 Hz for minimizing low-frequency noise, and a -10 dB pad for maximizing headroom on behalf of capturing loud signals without distortion. The +20 dB level-boost switch is specifically designed to provide a higher-quality signal with DSLR cameras. When activated, the camera preamp level is reduced, resulting in a lower noise floor and a much clearer recording.
Name | Value |
---|---|
Transducer | Pressure gradient |
Polar Pattern | XY Cardioid |
Frequency Range | 40 Hz to 20 kHz (selectable HPF @ 75 Hz) |
Sensitivity | -38 dB (12.6 mV @ 94 dB SPL) 2 dB re 1 V/Pa @ 1 kHz |
Output Impedance | 200 Ohms |
Maximum Output Level | +4.2 dBu (@ 1% THD into 1 kOhms) |
Dynamic Range | 100 dB |
Maximum SPL | 134 dB, max (1 kHz, 1% THD into 1 kOhms load) |
Signal / Noise | 76 dBA (A-weighted per IED651) |
Power Supply Type | 9 V alkaline battery |
Connections | 3.5 mm stereo mini-jack |
Signal to Noise Ratio | 76 dBA SPL (A-weighted per IEC651) |
Dimensions (WxHxD) | 80 x 134 x 115 mm |
Weight | 116 |
Rode Stereo VideoMic Pro Rycote