• Nikon SB-R200 I-TTL Remote Speedlight
• SJ-2 Color Filter Set
• SZ-1 Color Filter Holder
• AS-20 Speedlight Stand for SB-R200 Flash Head
• SS-R200 Soft Case

1. What is the Nikon SB-R200 I-TTL Remote Speedlight?

The Nikon SB-R200 I-TTL Remote Speedlight is a compact and lightweight external flash unit designed for use with Nikon digital cameras equipped with i-TTL flash control.

2. What is i-TTL flash control?

i-TTL (intelligent Through-The-Lens) flash control is a technology that uses the camera's metering system to determine the appropriate flash output for a given scene. This ensures accurate exposure and natural-looking flash photos.

3. What cameras are compatible with the SB-R200?

The SB-R200 is compatible with Nikon digital cameras that have i-TTL support, including the D Series, select COOLPIX models, and the Nikon 1 System.

4. Can the SB-R200 be used as a stand-alone flash unit?

No, the SB-R200 is designed to be used as a part of the Nikon Creative Lighting System and must be triggered by a compatible Nikon DSLR or Speedlight.

5. How is the SB-R200 powered?

The SB-R200 requires two CR123A lithium or four AA-size batteries for operation. Rechargeable batteries are recommended for optimal performance.

6. Can the SB-R200 be used with other Nikon Speedlights?

Yes, the SB-R200 can be used in conjunction with other Nikon i-TTL compatible Speedlights, such as the SB-500, SB-700, SB-5000, and SB-910.

7. What is the maximum range of the SB-R200?

The maximum range of the SB-R200 is approximately 98 feet (30 meters) when used with a compatible Nikon DSLR or Speedlight.

8. Is the SB-R200 weather-sealed?

No, the SB-R200 is not weather-sealed and should not be used in wet conditions.

9. Can the SB-R200 be used for high-speed sync?

Yes, the SB-R200 supports high-speed sync (FP flash) mode for shooting with fast shutter speeds.

10. Does the SB-R200 have manual control options?

Yes, the SB-R200 has manual control options for adjusting the flash output. It also has a built-in diffuser for softer light and a built-in bounce card for more even lighting.

Make sure you can get a light just where you need it with the compact and wireless Nikon SB-R200 I-TTL Remote Speedlight. Functioning as a wireless i-TTL slave flash for Nikon's Creative Lighting System, the SB-R200 is a unique speedlight that lends itself well to close-up photography. It features a guide number of 10 m at ISO 100 and has a wide flash distribution, allowing it to cover lenses as wide as 24mm. The head can also tilt downwards 60° and upwards 45° for controlling where light will fall on your subject. Users can make use of a built-in white LED for AF assist in dim lighting along with support for high-speed sync modes. Additionally, it runs on a single CR123A lithium battery and can recycle in approximately 6 seconds at full power.

The SB-R200 has a specialized shoe that can fit into the included AS-20 Speedlight Stand or the optional SX-1 Attachment Ring for mounting directly to a lens. It also comes with a filter holder and color filter set for color correction or specialized lighting effects.

Key Features of the Nikon SB-R200 I-TTL Remote Speedlight

• Designed to be used off-camera as a wireless slave flash, the SB-R200 is a compact speedlight that can be triggered by the SU-800 Wireless Speedlight Commander, CLS-compatible speedlights with commander modes, and the built-in flash of many Nikon DSLRs with iTTL support.
• The SB-R200 is optimized for close-up photography due to its compact design and unique ability to be mounted directly to a lens via an optional adapter or placed around the subject with the included AS-20 Speedlight Stand. Also, its size and wireless capabilities make it a good option for general photography as well.
• Supports i-TTL, D-TTL, TTL (film-based cameras), and manual control.
• Offers a guide number of 10 at ISO 100 and 14 m at ISO 200.
• Provides coverage for 24mm lenses with a beam angle of 60° vertically and 78° horizontally.
• The flash head can tilt downward 60° and tilt upwards 45° with click stops every 15°.
• AF assist light with white LED for working in dim light.
• Physical controls and a flash-ready light are present on the top of the unit.
• The SB-R200's wireless modes offers three groups and four channels.
• Manual control from 1/1 to 1/128 power.
• Has support for high-speed sync.
• The recycle time at full power is approximately 6 seconds.
• Flash duration of 3/5000 second.
• Runs on one CR123A lithium battery which provides enough power for approximately 290 flashes.

• MPN - FSA90601
• GTIN - 018208048052