Camera Plate

Head

Pan & Tilt

Legs

General

• Benro A373F Aluminum Single-Tube Tripod with S6Pro Fluid Video Head

• A373F Aluminum Single Tube Tripod

• 75mm Half-Ball Adapter

• Benro S6Pro Fluid Video Head
• Quick Release Plate for S6Pro
• 1/4"-20 Camera Screw
• 3/8"-16 Camera Screw
• Pan Bar

The Benro A373F Aluminum Single-Tube Tripod with S6Pro Fluid Video Head includes a 75mm Half-Ball Adapter and a Benro S6Pro Fluid Video Head

The Benro A373F Aluminum Single-Tube Tripod features a 75mm bowl and includes a 75mm half-ball adapter. It's paired with the S6Pro Fluid Video Head, which has a 65mm flat base that attaches right to the half-ball adapter. The head supports up to 6 kg loads, and thanks to the flat base design with a 3/8"-16 thread underneath, the head can be moved from the tripod directly to sliders, jibs, and other support gear. The versatile system has a compact design with 2-stage/3-section single-tube legs and both rubber and spiked feet for use on virtually all surfaces. Each leg of the tripod is independently adjustable into three positions, allowing you to set it up quickly and efficiently.

Key Features of the Benro A373F Aluminum Single-Tube Tripod with S6Pro Fluid Video Head

• 6 kg Payload/5+0 Steps Counterbalance
• 65mm Flat Base with 3/8"-16 Thread
• Low-Angle 30 to 160 cm Height; 2 Stages
• 3 Leg Positions; 75mm Half-Ball Adapter

A373F Tripod

• 75mm bowl tripod with a 75mm half-ball adapter
• Maximum height of 160 cm with the S6Pro attached
• Low-angle minimum height of 30 cm
• Single-tube legs independently adjustable into three positions
• Spiked and rubber feet
• Flip leg locks
• Aluminium construction

Benro S6 Pro

Featuring a 65mm flat base with a 3/8"-16 threaded hole, the Benro S6Pro Fluid Video Head can efficiently be moved between compatible tripods and sliders, jibs, monopods, and other support gear. It supports up to 33 cm loads and offers 5+0 steps of counterbalance and continuous pan and tilt drag. There are also independent pan and tilt locks. The tilt range is a wide +90/-75°, and the pan range is a full 360°.

Some parts of the head are made of magnesium and other parts of aluminium. Virtually the entire head, including its knobs, is made of robust yet lightweight metal. A pan bar is included that can be attached to a rosette adapter on the left or right side of the head, for left- or right-handed users. A camera plate is included that can be adjusted forward/backward to let you find the optimal balance for your camera. A safety lock on the plate ensures that once mounted, the plate won't slip out if you move it in either direction too much. Two camera screws are supplied—1/4"-20 and 3/8"-16—that can be stored underneath the camera plate on the head itself, in dedicated slots. For attaching accessories, there's a 1/4"-20 threaded hole on each side of the head to which you can secure articulating arms.

Key Features of the Benro S6 Pro

• 6 kg payload
• 65mm flat base with a 3/8"-16 thread
• Compatible with 65mm flat base tripods and can be mounted directly on most sliders, jibs, and monopods
• 5+0 steps of counterbalance
• Continuous pan and tilt drag
• Independent pan and tilt locks
• +90/-75° tilt range
• 360° pan range
• Made of magnesium and aluminium
• Rosette adapters on the left and right side for attaching the included pan bar
• Sliding camera plate with safety lock
• 1/4"-20 and 3/8"-16 camera screws included and can be stored in dedicated spaces on the top of the head, underneath the camera plate
• Two 1/4"-20 threaded holes for accessories

• MPN - A373FBS6PRO
• GTIN - 6931747313020