Benro A3883 Reverse-Folding Aluminum Travel Tripod with S6Pro Fluid Video Head

The Benro A3883 Reverse-Folding Aluminum Travel Tripod with S6Pro Fluid Video Head includes an A3883 Aluminum Travel Tripod and a Benro S6Pro Fluid Video Head.

The Benro A3883 Reverse-Folding Aluminum Travel Tripod with S6Pro Fluid Video Head features a highly compact travel tripod that can be converted to a monopod, and a compact fluid head with a 65mm flat base that allows moving the head directly to most sliders, jibs, and other support gear. The head supports up to 4 kg loads and offers 5+0 steps of counterbalance.

The tripod has a centre column with a levelling adapter on the end that allows you to adjust the angle of the fluid head without having to readjust the tripod legs. The combination of the reverse-folding design and centre column allows the tripod to have a max height of 182 cm (with the head attached) while being able to fold to a very compact size. Furthermore, the tripod legs can spread wide to provide a low-angle minimum height of only 34 cm (also with the head attached). With rubber feet and spikes underneath them, the tripod can be used on virtually all surfaces. To convert it to a monopod, the centre column is used as the core component. One of the legs of the tripod unscrews from the tripod and secures to the centre column, and together the two form a fully functioning monopod.

Key Features of the Benro A3883 Reverse-Folding Aluminum Travel Tripod with S6Pro Fluid Video Head

• 4 kg Payload/5+0 Steps Counterbalance
• 65mm Flat Base with 3/8"-16 Thread
• Center Column and Leveling Adapter
• Convertible to Full-Function Monopod

A3883 Tripod

• Reverse-folding travel tripod with a centre column and levelling adapter
• Convertible to a monopod with one of the tripod legs unscrewed and secured to the centre column
• Maximum height of 182 cm with the S6Pro attached
• Low-angle minimum height of 34 cm
• Spiked and rubber feet
• Twist leg locks
• Aluminium construction

Benro S6Pro Fluid Video Head

The Benro S6Pro head features continuous pan and tilt drag and has independent pan and tilt locks. The tilt range is a wide +90/-75°, and the pan range is a full 360°. Some parts of the head are made of magnesium and other parts of aluminium. Virtually the entire head, including its knobs, is made of robust yet lightweight metal.

A pan bar is included that can be attached to a rosette adapter on the left or right side of the head, for left- or right-handed users. A camera plate is included that can be adjusted forward/backward to let you find the optimal balance for your camera. A safety lock on the plate ensures that once mounted, the plate won't slip out if you move it too far in either direction. Two camera screws are supplied—1/4"-20 and 3/8"-16—that can be stored underneath the camera plate on the head itself, in dedicated slots. For attaching accessories, there's a 1/4"-20 threaded hole on each side of the head to which you can secure articulating arms.

Key Features of the Benro S6Pro Fluid Video Head

• 6 kg Payload/5+0 Steps Counterbalance
• 65mm Flat Base with 3/8"-16 Thread
• For Flat Base Tripods + Sliders/Jibs
• Left/Right Rosettes for Included Pan Bar

S6Pro Fluid Head

• 4 kg payload
• 65mm flat base with a 3/8"-16 thread
• Can also be mounted directly on most sliders, jibs, and monopods

• MPN - A3883TS6PRO
• GTIN - 6931747313044