14959 enro C373FBS7 Carbon Fiber Tripod Kit with S7 Video Head 2015 Tripods BENRO

enro C373FBS7 Carbon Fiber Tripod Kit with S7 Video Head (125691)

$925.00 925.00
Product Overview
  • 6.98 kg Load Capacity

  • Flat Base Head with Half Ball Adapter

  • 4-Step Counterbalance

  • Continuous Pan Drag

  • Independent Pan and Tilt Locks

  • Manfrotto 501/504PL Type Sliding Plate

  • 3-Stage Carbon Fiber Legs

  • 29.4 to 160.48 cm Height Range

  • Flip-Lock Leg Release

  • Screw-In Rubber and Spiked Feet


Limited stock please check for availability**For Online Delivery - for Click & Collect please use Check Stock button below

The Benro S7 Tripod Kit with A373F Carbon Fiber Legs is designed to support camera rigs weighing up to 15.4 pounds. The kit pairs the S7 Video Head with the 2-stage, 3-section A373F Series 3 Carbon Fiber tripod. The head attaches to the tripod using a 75mm bowl adapter features a 75mm half ball adapter, which can be removed attaching directly to tripods, monopods, sliders, and other camera support equipment with a 3/8"-16 threaded stud. The system has a maximum height of 63.18", a minimum height of 11.6", and weighs 8.5 pounds. A carrying case is included for convenient transport and storage.

The head features a 4-step counterbalance system to help you counter the weight of your camera or heavy lens, and continuous pan drag adjustment, so you can dial in the right amount of tension for each shot. The pan and tilt locks operate independently of each other and are located on the operator side of the head for easy access and control. The head has tilt range of -50° to +90°. Your camera attaches to the S7 head via an included Manfrotto 501/504PL compatible sliding quick-release plate. Also included is an adjustable length pan bar handle, which can be mounted on either side of the head. Additional features include an illuminated bubble level and two 3/8"-16 threads for attaching optional accessories such as a monitor or recorder.

The A3573F Series 3 Carbon Fiber tripod legs features a 2-stage design, with three sections that are secured using flip-lock levers. The legs feature a spreader-less design with three discreet stops for locking them at different degrees of spread. In addition, they can be opened fully for low-angle shooting. For a secure grip on virtually any surface, the tripod has screw-in rubber feet can be easily swapped out with included spiked feet.


  • Supports up to 15.4 lb
  • 65mm flat base with 3/8"-16 thread
  • 75mm half ball
  • 4-step (0-3) counterbalance: 0 lb, 5.0 lb, 10 lb, 15.4 lb
  • Continuous pan drag
  • Independent pan and tilt locks
  • Tilt Range: -50°/+90°
  • Manfrotto 501/504PL compatible sliding plate
  • Two 3/8"-16 accessory threads for mounting accessories, such as monitor or recorder
  • Illuminated bubble level
  • Adjustable length pan bar
  • 2-stage, 3-section Carbon Fiber tripod with 75mm bowl fitting
  • Flip lock levers
  • Three leg angles
  • Screw-in rubber and spiked feet
  • Max height: 63.18" (with S7 head attached)
  • Min height: 11.6" (with S7 head attached)


  • MPN - C373FBS7
  • GTIN - 6931747366088


Accessory Mounting Threads: 2 x 3/8"-16
Tilt Drag: 4-step (0 to 3) fluid cartridge
Quick Release: QR6 (Manfrotto 501/504PL compatible) 1/4"-20 and 3/8"-16 cameras screws
Tilt Range: -50° to +90°
Panning Range: 360°
Counterbalance Steps: 4-step: 0 lb / 0 kg, 5.0 lb / 2.2 kg, 10 lb / 4.5 kg, 15.4 lb / 7 kg
Head Load Capacity: 7 kg
Head to Tripod Mounting Thread: 3/8"-16 thread (75 mm half ball adapter included)
Pan Drag: Continuous
Load Capacity: 15.4 lb (7 kg)
Maximum Working Height: 63.18 in (160.5 cm)
Minimum Working Height: 11.6" (29.5 cm)
Weight: 1400
Materials: Carbon Fiber
Leg Lock Type: Flip lock
Leg Sections: 2 / 3

Benro S7 Video Tripod Kit with A373F Carbon Fiber Legs

  • A373F Carbon Fiber Tripod

  • S7 Video Head

  • 75mm Half Ball Adapter

  • 3 x Spiked Feet

  • Carrying Case


Be the first to review this product! Help other DigiDirect customers shop smarter by writing reviews for products you have purchased.