17389 Benro MoveOver8B Carbon Fiber Slider with Case 2109 Camera Sliders BENRO

Benro MoveOver8B Carbon Fiber Slider with Case (127781)

$399.00 399.00
Product Overview
  • Includes SuperUser Group Membership
  • 0.6m of Slider Carriage Travel
  • Carriage Features 3/8"-16 Mounting Stud
  • Smooth, Quiet Ball Bearing Slides
  • Friction-Adjusting Knob and Brake
  • 18mm Carbon Fiber Rails
  • Supports over 17 Pounds
  • Multi-Adjustable All-Terrain Legs
  • Micro-Adjust Non-Scratch Feet
  • 0 to 90° and Underslung Operation
1
Shipping: FREE SHIPPING

Limited stock please check for availability**For Online Delivery - for Click & Collect please use Check Stock button below
QTY

This Benro MoveOver8B Carbon Fiber Slider with Case includes an aluminum slider carriage that runs on carbon fiber rails with 23.6" of actual carriage travel, and a soft carry case. The carriage features a flat mounting surface with a 3/8"-16 threaded mounting stud for mounting your flat base fluid head, and it features pre-tensioned roller bearings for a smooth glide. A built-in friction brake is controlled by a single knob, allowing you to adjust the friction on the slider, or even use it as a brake when the slider is level.

The slider features 18mm diameter carbon fiber rails and supports a total payload of up to 17.6 pounds. The slider can be mounted on a tripod or stands, or placed on a level surface. The built-in bubble level enables you to confirm that your slider is level. Each leg mounts onto the slider track ends via a rosette and can rotate throughout 360°, and each foot has approximately 4" of height adjustment for leveling. You can operate the slider on any angle from 0 to 90°, and you can even undersling the slider.

  • The adjustable legs can be moved throughout 360° of rotation. However, they are at their most supportive between 12 and 60°.
  • The track ends allow you to mount the slider on stands using the Baby pin slot. Each track end features 1/4"-20 and 3/8"-16 threaded mounting holes.
  • The slider can also be mounted directly onto a tripod using the 3/8"-16 or 1/4"-20 threaded mounting hole on the attached cheese plate.
  • The carriage has four 1/4"-20 threaded mounting holes for accessories.

 

  • MPN - C08D6B
  • GTIN - N/A

No available accessories for this Product

Specification

Bubble level: Yes
Load Capacity: 7.71 kg
Actual Slider Carriage Travel: 0.6 m
Body Material: Aluminum
Carriage Dimensions: 166.0 x 119.0 x 13.0 mm
Quick Release Plate Type: No Quick Release
Rail Material: Carbon Fiber
Rail Diameter: 18 mm
Stand Receiver: 2 x 5/8"
Tripod Mounting: 2 x 3/8"-16 Female Thread
1 x 1/4"-20 Female Thread
Accessory Mounting: 4 x 1/4"-20 Female Thread (Carriage)
3 x 1/4"-20 Female Thread (Rails)
1 x 3/8"-16 Female Thread (Rails)
Two 1/4"-20 and one 3/8"16 accessory mounting threads on the top of each of the track ends, one 1/4"-20 on the underside
Camera Mounting Screw: 3/8"-16 Male
Track Width: 100 mm

Benro MoveOver8B Carbon Fiber Slider with Case

Review

Be the first to review this product! Help other DigiDirect customers shop smarter by writing reviews for products you have purchased.