• 2 1/4"-20 Shoe Mounts with Extra Screws
• 360° Ball Head Rotation
• Aluminum Alloy Construction
• Achieve perfect video angles; this cold shoe mount is ideal for on-camera setups.

• Compatible with NATO Accessories
• Spring-Loaded Pin at Both Ends
• Safety pins on both ends to prevent sliding off

• Mounts to Standard NATO Rail
• Balances Front-to-Back & Left-to-Right
• 2 x Anti-Twist ARRI Accessory Mounts
• 2 x Cold Shoe Adapters
• 1/4"-20 & 3/8"-16 Accessory Threads
• Aluminum Alloy Construction

• Adjusts 7 cm to Balance Camera Rig
• 2 x Cold Shoe Adapters
• 1/4"-20 & 3/8"-16 Accessory Threads
• 2 x Anti-Twist ARRI Accessory Mounts
• Magnetic Groove Holds Included Wrench
• Aluminum Alloy Construction

• Female HDMI Type A on One End
• Male HDMI Type A on Other End
• 2 x 1/4"-20 Threads on Female End
• Ultra-Slim Cable for up to 4K60 Video
• Cable Measures 5.6" in Length
• 3.5mm Outer Diameter, Flexible PVC Cable

• Attaches to Left or Right Side of Gimbal
• Tilt-Adjustable Thumbwheel Monitor Mount
• Top and Bottom Shoe Mounts
• Top and Side 1/4"-20 Threads
• Matte Nonreflective Surface

• Supports 4K UHD @ 60 Hz
• PVC Jacket
• Suitable for Use in Camera Rigs
• Includes Cable Tie for Neat Installation

• 54 Anti-Blue LEDs
• Foldable Design with Telescoping Pole
• Pole Clamp for 2 Phones or 1 Tablet
• Pivotable Light & Pole
• 3 Color Temp Settings: 3000, 4000, 5500K
• 5 Brightness Adjustments: 20-100%
• Built-In 3600mAh Rechargeable Battery
• One-Button Full Brightness Selection
• Locking Pole Base
• USB Type-C Charging Port

• For SmallRig 3270 Cage for BMPCC 6K Pro
• Prevents Accidental Cable Disconnects
• 2 x Easy-to-Grasp Knurled 1/4"-20 Screws
• Secures Both HDMI & USB Type-C Cables
• Durable Aluminum Construction

• Mounts SSD on Camera or Camera Cage
• Spring Lever Secures SSD in Place
• 1/4"-20 Thread & Shoe Mount
• USB Type-C Cable Clamp Included
• Rubber Padding Prevents Scratches
• 1/4"-20 Screws Included
• Aluminum & Stainless Steel Construction

• Fits Standard 15mm LWS Rods
• Y-Shaped Lens Support
• Fits up to 150mm Lens Diameter
• 4 cm Vertical Adjustment Range
• Quick Release Knob Adjustment
• Aluminum Construction

• Fits Standard 15mm LWS Rods
• Y-Shaped Lens Support
• Fits up to 150mm Lens Diameter
• 5 cm Vertical Adjustment Range
• Quick Release Knob Adjustment
• Aluminum Construction

• Wood Side Handle for Camera Cage
• Can Be Configured for Right or Left Hand
• Adjusts Up & Down with Sliding Connector
• 1/4"-20 Thumbscrew Mounts, 2 cm Apart
• 1/4"-20 & 3/8"-16 Mounting Threads
• 4 cm Adjustable Sliding Range
• Shoe Mount on Top
• Wood & Aluminum Construction

• Female HDMI Type A on One End
• Male Mini-HDMI Type C on Other End
• 2 x 1/4"-20 Threads on Female End
• Ultra-Slim Cable for up to 4K60 Video
• Cable Measures 141.1 mm in Length
• 3.5mm Outer Diameter, Flexible PVC Cable

• Supports 4K UHD @ 60 Hz
• PVC Jacket
• Suitable for Use in Camera Rigs
• Includes Cable Tie for Neat Installation

• Selfie Stick with 1/4"-20 Screw Mount
• Quick Release Tripod Legs
• Mount up to 4 x Smartphones
• Extends up to 165 cm in Height
• Folds Down to 35 cm Long
• Light Aluminum/Plastic Construction

• Modular
• Two-way Fast Charging
• Wireless Control
• Long-lasting use per charge
• Built-in lithium battery, with battery indicator, provides longer operating life.
• Built-in wireless to control the start/stop of shooting/recording.
• Stable tripod support, can be folded to use as a handle with a comfortable grip.
• Highly compatible holder, supports wireless charging for smartphones with or without phone cases.
• The holder comes with a cold shoe mount and 1/4 inch-20 hole, supporting multiple accessories.

• Bendable legs for use in various terrain
• Quick release two-way cold shoe, swiveled up to 180º back and forth
• Weighs 220g and fits easily into a shoulder bag or handbag
• Made of aluminum alloy and nylon with fiber, durable and sturdy
• Compatible with most mobile phones, card digital cameras, and lightweight

• Built-in lithium battery, with battery indicator, provides longer operating life
• Built-in wireless to control the start/stop of shooting/recording
• Stable tripod support, can be folded to use as a handle with comfortable grip
• Compatible with mirrorless cameras, compact Cameras, action cameras, mobile phone holders

• Built-in lithium battery, with battery indicator, provides longer operating life.
• Built-in wireless to control the start/stop of shooting/recording.
• Stable tripod support, can be folded to use as a handle with comfortable grip.
• Highly compatible holder, supports wireless charging for smartphone with or without phone cases.
• The holder comes with a cold shoe mount and 1/4 inch-20 hole, supporting multiple accessories.

• 0.8 MOD Gear for Cine Follow Focus
• 62.5 to 64.5mm Diameter for Focus/Zoom
• Fully Closed and Requires No Screws
• Low Noise, No Distortion, Accurate
• Allows Smooth 360° Rotation

• 0.8 MOD Gear for Cine Follow Focus
• 66 to 68mm Diameter for Focus/Zoom
• Fully Closed and Requires No Screws
• Low Noise, No Distortion, Accurate
• Allows Smooth 360° Rotation

• 0.8 MOD Gear for Cine Follow Focus
• 75 to 77mm Diameter for Focus/Zoom
• Fully Closed and Requires No Screws
• Low Noise, No Distortion, Accurate
• Allows Smooth 360° Rotation

• 0.8 MOD Gear for Cine Follow Focus
• 78 to 80mm Diameter for Focus/Zoom
• Low Noise, No Distortion, Accurate
• Fully Closed and Requires No Screws
• Allows Smooth 360° Rotation

• A form-fitting cage designed for Atomos Ninja V.
• NATO rails on the top and bottom.
• ARRI locating holes.
• An HDMI cable clamp included.
• Drive locks for Atomos Master Caddy II.

• Compatible with multi-model electronically controlled REC function of SONY, Panasonic, FUJIFILM, Z CAM.
• Ergonomically designed to improve grip experience.
• Made of high-quality wood, secured with ARRI rosette.

• Anti-scratch: protects metal shell that is vulnerable to scratches.
• Anti-drop: reduces damage resulting from accidental drops.
• Anti-slip: frosted surface increases friction and adsorption.
• Insulation: insulates hands against camera overheating because of high-definition video shooting.
• Formfitting: maintains access to DJI receiver and indicators and allows accessory attachment.
• Retains magnetic properties: highly compatible with all official DJI accessories via magnets.
• Suits multiple scenes: supports lanyard and securely attaches to walls.

• For Select SmallRig Mobile Phone Cages
• 3 x 1/4"-20 Threaded Holes
• Adjustable Handle Height
• Anti-Slip Rubber Pads
• Achieve More Stable Video
• Cold Shoe Mount
• Adjustable Locking Screw Tightness

• Universal adjustable baseplate compatible with a mirrorless camera and DSLR.
• Comes with a base plate and a QR plate of Arca-swiss standards, locked via a locking lever for quick release and attachment of camera.
• Can be adjusted in height via a wingnut, and thus it enables 85mm rod height. The height from the QR plate to rod center ranges from 33.6mm to 57.6mm.
• Equipped with 1/4 inch-20 and 3/8 inch-16 threaded holes to attach QR plates and then tripod.
• Thumb-Lever Locks
• For Mirrorless and Small Cine Cameras

• Wood Side Handle for Camera Cage
• Adjusts up & down with Sliding Connector
• 1/4"-20 & 3/8"-16 Mounting Threads
• Wood & Aluminum Construction
• Can Be Configured for Right or Left Hand
• NATO Clamp Mount
• Shoe Mount on Top

• Mount Shotgun Microphone on 15mm Rod
• Fits 19 to 25mm Diameter Microphones
• 15mm Rod Clamp
• Silicone Pads to Secure and Absorb Bumps

• Compatible with NATO clamp for quick release.
• Only 6mm thick.
• Spring-loaded safety pins on both ends.
• 1/4 inch-20 mounting screws included.

• Attach to any tripod plate or other standard bridge plate
• Clamps onto 15mm rails for accessories attachment
• Allows 40mm adjustment for balance control

• Industry-Standard VCT-14 QR
• Standard Release Lever
• All-Metal Construction
• Multiple 1/4"-20 and 3/8"-16 Threads

• For Zhiyun CRANE 3 LAB/3S, WEEBILL S/LAB
• Also Fits Moza AirCross 2, 1/4"-20 Screw
• 1/4"-20 Accessory Mounting Threads
• Rosette Mounting Plate for Ronin-S/SC
• 2.2 lb Load Capacity, 360° Tilt Range

• Formfitting Full Cage for Panasonic S5 Camera.
• Multiple 1/4 inch-20 and ARRI 3/8 inch-16 Accessory Threads.
• Integrated Cold Shoe and NATO Rail.
• Locks Camera via 1/4 inch-20 and M2.5 Screw to Prevent Twisting.
• Built-In Flat Head Screwdriver with Allen Wrench on the Bottom.

• For SmallRig Sony a7S III Camera Cage
• One Easy-Grasp Knurled 1/4"-20 Screw
• Durable Aluminum Construction
• Prevents HDMI Cable Pulls & Disconnects
• 1/4"-20 Screw Mount with Anti-Twist Pins

• Form-fitting cage for R5 and R6 cameras.
• Maintains full access to the camera's controls.
• Comes with HDMI cable clamp to ensure stable filming
• Weighs only 313g, portable for instant shooting
• Multiple accessory mounts for multi-scene shooting.
• Comes with lightweight ARRI top handle for better grip experience and easy handheld shot.

• Lightweight, Compact Video Head
• 36mm Diameter Flat Base
• +90/-55 Tilting, 360 Panning
• 20 cm Pan Handle Fits Right or Left Side
• 2.9 kg Maximum Payload
• Arca-Type Quick Release Plate
• Independent Pan/Tilt Locks

• Compact and easy to carry around.
• Prevents T5 SSD and USB-C cable from disconnection and ensures stable transmission during filming.
• Fixed via a thumb screw, allowing quick assembly and disassembly.

• Designed for the iPhone 13 Pro Max Cage
• 17mm Lens Thread
• Doesn't Block Your iPhone's Camera
• Secured Using Three Screws

• Designed for the iPhone 13 Pro Cage
• 17mm Lens Thread
• Doesn't Block Your iPhone's Camera
• Secured Using Three Screws

• Portable handheld kit for an easy low-angle shot.
• Two-point locking, stable, and no deflection.
• Spindle spanner at the battery door fits camera curve and enhances grip experience.
• Multiple mounting points: 1/4"-20 threaded holes, ARRI 3/8" -16 locating holes, cold shoes and NATO rails support handles, microphones, LED lights, monitors, etc.
• HDMI cable clamp protects interfaces and ensures stable signal transmission.

• Fits any accessories with 1/4”-20 threads.
• Support 2 cables of various thicknesses of diameter 2-7mm.
• Secures cable via thumbscrew for quick installment.
• All screws share one hex spanner.

• Supports 5 inch and 7 inch monitor up to 1.2kg.
• Swivel 360° and tilt 140° with free-stop in any position.
• Features holes on thumbscrews for hex spanner.
• Rubber pad on the top to prevent scratch.
• CNC-Machined aluminum construction, robust & durable.

• Mounts Monitor or Accessory on Handheld Gimbal.
• 2Supports Monitor up to 1kg.
• Tilt 180° with Free-Stop at Any Position.
• 1/4 inch-20 and Cold Shoe Accessory Mount.
• Features Slots on Thumbscrews for Further Secure with Allen Wrench.
• Adjustable Degree of Tightness

• A dedicated baseplate designed for BMPCC 4K & 6K.
• Manfrotto 501PL compatible QR plate and receiver on the top and secured by a lever.
• 15mm rail support at 85mm rod height.
• Arri standard dovetail on the bottom.
• 1/4"-20 and 3/8"-16 threaded holes on the bottom for attachment of other plates.

• Arri standard rosette, rosette locks firmly
• The anti-lose design, the screws could never lose
• Convenient operation, lock in two steps
• Tiny and lightweight

• Quickly locked and unlocked through a click without jamming.
• Exclusive patent, adapts with dual locking structure, provides high load capacity and no shaking.
• Highly compatible with tripods, cages, heads, etc. via 1/4"-20 holes.
• Compact and portable.

• Quickly locked and unlocked through a click without jamming.
• 360° swivel and 170° tilt angle adjustment.
• Adjustable damping, maximum dynamic load capacity of 1.5kg.

• Supports 4x5.65 matte box system.
• Double-sided multi-layer nano-coating, with uniform linearity of extinction spectrum.
• Made of excellent SCHOTT B270 optical glass from Germany, without damaging image quality.
• Waterproof and oil-resistant coating.
• High-accuracy color reproduction at moderate color temperature.

• For Sony a1 & a7S III
• For Sony a7 IV & a7R IV
• Aluminum Alloy & Steel Construction
• Multiple 1/4"-20 & 3/8"-16 ARRI Threads
• One Cold Shoe Mount
• Arca Quick Release Baseplate
• Works with Camera's Original Handgrip
• Maintains Access to Controls & Battery
• 1/4"-20 Screw & Side Plate Lock Camera

• High compatibility for tripod, cage, head and other accessories via 1/4"-20 screws.
• Compact and portable.
• Quickly locked and unlocked through a click without jamming

• At 1 meter distance, the maximum illuminance of the bare light source is 5,370 lux. Attach the hyper reflector and the illuminance level increases to an impressive 62,600 lux.
• Ultra-high color rendering TLCI 96+, CRI 95+
• Supports manual light control and remote control with the SmallGoGo App.
• Intelligent light control offers color temperature adjustment and 9 light effects
• Dual power supply system, support AC adapter and 14.4V/26V V-mount battery
• The noise level of the ultra-quiet fan is only 25dB±2dB at a 1 meter distance
• When the temperature of the lamp body exceeds 60℃, the active heat dissipation function is turned on
• Standard Bowens mount: compatible with most light-control accessories
• Comes with a high quality snowflake cloth portable storage bag

• At 1 meter distance, the maximum illuminance of the bare light source is 4,450 lux (5600k). Attach the hyper reflector and the illuminance level increases to an impressive 52,800 lux.
• Ultra-high color rendering TLCI 96+, CRI 95+, CCT 2700K-6500K
• Supports manual light control and remote control with the SmallGoGo App.
• Intelligent light control offers color temperature adjustment and 9 light effects
• Dual power supply system, support AC adapter and 14.4V/26V V-mount battery
• The noise level of the ultra-quiet fan is only 25dB±2dB at a 1 meter distance
• When the temperature of the lamp body exceeds 60℃, the active heat dissipation function is turned on
• Standard Bowens mount: compatible with most light-control accessories
• Comes with a high quality snowflake cloth portable storage bag

• Arca-Swiss Compatible Quick Release
• Adjustable Center of Gravity
• Detachable Telescopic Handle
• 1/4"-20 Threaded Accessory Mounting Hole

• Compatible with 12mm and 15mm rod for greater versatility.
• Screw and locating pin prevent deflection.
• Locks via one knob screw for easy disassembly and assembly.

• Ergonomically designed to improve grip experience and reduce burdens on arms.
• Mostly made of aluminum alloy, together with anti-slip and anti-freeze silicone.
• Hollowed-out design makes it weigh only 124g.
• 5 built-in cold shoe mounts for microphone, LED light, monitor, etc.
• Quick-release NATO clamp.

• Dedicated Atomos Ninja V/Ninja V+ kit for monitor and screen protection
• Multiple accessories mounting points for magic arm, monitor mount, etc.
• Includes cage, sunhood, screen protector, silicone case
• Dedicated HDMI cable clamp protects interface and prevents disconnection

• Handheld kit for Canon EOS R5 C for comfortable and stable shooting experience
• Maintains full access to camera controls
• Thumb-screw HDMI & USB-C cable clamp ensures smooth data transmission
• Accessory mounts such as 1/4”-20 threaded holes, ARRI 3/8”-16 locating holes, cold shoes, NATO rail
• Fits EOS R5 C elements
• Detachable extended baseplate provides various shooting solutions

• High CRI Rating
• 9 Light Effects, 2700-6500K CCT
• Stepless Dimming, Quiet Fan Cooling
• Built-In Cooling Fan
• Bowens Mount for Accessories
• Local and App Control
• XLR Power Input Port

• Provides solutions to action camera and mobile phone photography with using a car.
• Exclusive double-layer suction cup provides long-lasting and stable adsorption to keep the equipment safe.
• One-button press design for quick removal and installation of suction cups to improve shooting efficiency.
• Multiple accessory mounting points.

• 4 Clamps, Each with 1/4"-20 Screw
• Fits 0.08 to 0.3" Diameter Cables
• Lightweight Plastic Construction
• Secure and Neaten Camera Cables
• Soft Silicone Center

• Mounts on Surface 1.3 to 6.5 cm Wide
• 3.5 kg Load Capacity, Rubber Padding
• Aluminum & Stainless Steel Construction
• 1/4"-20 & 3/8"-16 Mounting Threads
• Large Thumb-Lever Fastener

• Portable handheld cage kit, suitable for the low-angle shot.
• Streamlined shape, snug, lightweight, easy to operate.
• Multiple accessory mounting points.
• Integrate with Arca-Swiss plate for quick shooting scene switching.

• Compatible Cold Shoe
• Made of Aluminum Alloy
• Swivels 360° & Tilts 180°
• Built-In 1/4"-20 Threaded Hole
• Highly compatible cold shoe
• Swivels 360° and tilts 180°, tightness adjustable on each axis
• The item is compatible with both 5 and 7" monitors, and supports accessories weighing less than 7.1 pounds
• Built-in 1/4"-20 threaded hole for magic arm, ballhead, etc
• Upper and lower thumbscrew has holes for spanner for easy disassembly

• Fully Decoded Chip: the battery supports the original camera and charger without causing pop-ups and enables power display.
• Dual Fast Charging: quickly charges one or two batteries with high current output.
• Digital Screen Display: LCD screen displays charging current, charging voltage, charging progress, and charging capacity in real-time.
• Long Battery Life: 2040 mAh high capacity brings long battery life.
• Multi-ways of Charging: built-in USB-A charging cable and USB-C input interface allow being charged via the charger, car charger, or power bank.

• For the iPhone 12 and 13 Series
• For Phone Cages or Cases with an M Mount
• Fits 52mm Filters
• Magnetically Secures Filters
• Quick Release Mount
• Built Using Aluminum Alloy and Iron
• Does Not Affect Phone Operations

• Dedicated handheld kit for Canon EOS C70 for stable and comfortable shooting.
• 1/4"-20 threaded holes, 3/8"-16 threaded holes, cold shoe mounts, ARRI 3/8" -16 locating holes, NATO rails, etc. for multi-scene shooting.
• Top plate compatible with the original handle unit and microphone holder unit.
• Supports DJI RS 2 / RSC 2 stabilizers after removing the detachable extended baseplate.
• HDMI cable clamp ensures stable data transmission.
• Maintains full access to original camera grip and buttons.
• Perfectly matches Canon EOS C70 by extracting its elements

• Modular design: works with wireless controller 3920 for catering to various scenes.
• Functional buttons: supports videoing / photographing, joystick control, mode switch, centering / locking, sleep mode, and other functions of DJI RS 2 / RS 3 Pro.
• Wireless control: freely controls stabilizer in an array of scenes (max range: 100m).
• Mounting holes for original DJI smartphone holder, monitor, microphone, etc
• Quickly removed and folded for easier shooting and storage.

• Formfitting Aluminum Camera Cage
• Open Access to Controls and Ports
• Integrated Arca-Type Base, Strap Hole
• Shoe Mounts and NATO Rails
• 1/4"-20 and 3/8"-16 Accessory Threads
• 1/4"-20 Camera Screw + Side Lock

• 50Wh Lithium-Ion V-Mount Battery
• Supports up to 12A Draw
• 14.8V D-Tap Output
• USB Type-A Output, 2 x DC Barrel Outputs
• USB Type-C Input/Output
• D-Tap & USB Type-C Fast PD Charging
• Ultracompact, Travel-Friendly Size

• 99Wh Lithium-Ion V-Mount Battery
• Supports up to 14A Draw
• 14.8V D-Tap Output
• USB Type-A Output, 2 x DC Barrel Outputs
• USB Type-C Input/Output
• D-Tap & USB Type-C Fast PD Charging
• Ultracompact, Travel-Friendly Size

• 155Wh Lithium-Ion V-Mount Battery
• Supports up to 14A Draw
• 1 x 14.8V D-Tap Output
• USB Type-A Output, 2 x DC Barrel Outputs
• USB Type-C Input/Output
• D-Tap & USB Type-C Fast PD Charging
• Ultra-Compact, Travel-Friendly Size

• Focus Controller for Cine/DSLR Lens
• Power-Failure Memory
• Up to 20-Hour Battery Life
• Wireless Anti-Interference Algorithm
• Optional Start/Stop Function
• Works with Wireless Handgrip & Motor
• Replaceable Marking Disk
• A-B Point Settings & Vibrating Warning
• Low-Power OLED Display

• SmallRig Wireless Handwheel Controller
• Supports follow focus/recording/power supply
• Low-latency and high-precision wireless/cabled control
• Power-failure memory; no need for repeated calibration
• Suitable for both right hand and left hands; easy to install

• SmallRig Wireless Receiver Motor
• 15mm rod support system
• M0.8 lens and follow focus lens gear ring
• Incompatible with non-SmallRig wireless follow focus system
• PD/QC fast charging protocol

• SmallRig L-Series Battery Plate for Wireless Follow Focus Motor
• Power Wireless Follow Focus Motor
• NP-F/L-Series Battery Plate
• Quick Release Design
• Mounts Directly onto Motor Contacts

• Follow Focus Controller
• Run/Stop REC Function Support
• Right- or Left-Hand Support
• Wireless Handgrip and Handgrip Adapter
• Handgrip Powered via LP-E6 Battery
• Can Power Motor Using USB-C Cable

• SmallRig Wireless Handwheel Controller
• Built-in 1400mAh battery lasts approximately 20 hours
• Power-failure memory
• Ultra-low-power OLED screen with user-friendly interaction
• High-precision BLDC control algorithm and anti-interference encryption algorithm
• Replaceable marking disk

• SmallRig Wireless Receiver Motor
• 15mm rod support system
• M0.8 lens and follow focus lens gear ring
• Incompatible with non-SmallRig wireless follow focus system
• PD/QC fast charging protocol

• SmallRig L-Series Battery Plate for Wireless Follow Focus Motor
• Power Wireless Follow Focus Motor
• NP-F/L-Series Battery Plate
• Quick Release Design
• Mounts Directly onto Motor Contacts

• Designed for Z CAM HDMI-SDI Converter
• Attach the HDMI-SDI Converter to the Side of E2 Series Camera
• Locks on the Converter via Two 1/4”-20 Captive Screws
• The Thumbscrew Features Allen Wrench Slots for Further Secure

• ARRI Positioning Pin
• Expansion Pin
• Features stretchable pins to prevent twisting 1/4"-20
• Screw Expansion
• Pin Magnetic
• Wrench A small magnetic wrench on the bottom for tightening the thumbwheel

• 1/4"-20 Screw
• Magnetic Wrench
• Stretchable Pin
• Billows
• One end has a 1/4"-20 threaded connection with a telescopic pin to effectively prevent the device from deflecting.
• NATO Clamp

• Compatible with ARRI-Style Dovetail
• 15mm LWS Rod Support
• 1/4"-20 & 3/8"-16 Threads on Bottom
• Supports up to 19 kg
• 1/4"-20 & 3/8"-16 Camera Screws
• Aluminum & Stainless Steel Construction

• Fits Z CAM E2-S6/F6/F8 Cameras
• 1/4"-20 & 3/8"-16 Accessory Threads
• USB & HDMI Cable Clamps Included
• Aluminum Alloy Construction
• 2 x NATO Rails, 1 x ARRI Rosette
• ARRI-Style Accessory Mounts
• Maintains Access to Camera Controls

• Color temperature 5600K
• Luminosity at 1 m without hyper reflector 10,100 lux (5600 K)
• CRI: 97
• TLCI: 98
• On-board control or via SmallGoGo app
• 9 built-in light effects
• Power consumption: 350W
• Two fan cooling
• Standard Bowens mount

• Patent light source: larger and higher-power LED chip produces light more efficiently by contrasting output power with output illuminance. All else being equal, its illuminance outperforms comparable peers by more than 35%.
• High-transmittance front glass: tailor-made beaded glass with six layers of coating has a transmittance of more than 97% in the visible wavelength range, ensuring lossless light flux and even color mixing without flares.
• Patent COB bead arrangement and heat dissipation technology: unlike ordinary SMD, COB provides even color mixing. Board made of rolled aluminum sheet and composite copper ensures high reflectivity and thermal conductivity.
• Patent COB bead arrangement and heat dissipation technology: unlike ordinary SMD, COB provides even color mixing. Board made of rolled aluminum sheet and composite copper ensures high reflectivity and thermal conductivity.
• Non-stop damping support system offers safe cushion and smooth tilt adjustment.
• Quiet cooling fans with intelligent temperature control algorithm improves heat dissipation and produces only 28dB sound within 1 meter, suitable for video recording.
• Lightweight design
• Made of metal and V-0 non-inflammable material, making the light 20% lighter
• GaN (Gallium Nitride) adapter is 26% smaller and 200g lighter
• Detachable cushioning head helps save storage room for easier transport
• Three different ways of control: light switch / SmallGoGo App / control panel (optional).
• Bowens mount supports most light-control accessories to create varied lighting effects.
• Light plus the included carrying bag weighs only 7.9kg for easy storage, transport, and all-around protection.

• “AstralTech” optical system 
• For Content Creators and Vloggers
• 121,000 Lux at 3.3' and 5600K
• Color Temperature: 2700 to 6500K
• AC Power
• On-Board and Bluetooth App Control
• CRI/TLCI: 96/97
• Fan-Cooled
• Bowens-S Mount

• Fully Decoded Chip
• Long Battery Life
• Battery Compatible for Sony Alpha 7 III/Alpha 7S III/ Alpha 7 IV/ Alpha 7R III/Alpha 7R IV/Alpha 7C/Alpha 6600/ Alpha 9/Alpha 9 II
• High-quality ABS+PC fireproof material

*Not Compatible with Sony FX3 or FX30

• Quick switch between horizontal and vertical modes
• Gives full access to ports and LCD screen
• Arca-type plate and Manfrotto RC2 plate
• Quick-release plate supports handle in handheld mode
• Baseplate can be used separately for a better grip experience

• Camera Cage for a7R V, a7 IV, a7S III
• Top Handle, HDMI Cable Clamp
• 1/4"-20 & 3/8"-16 Accessory Threads
• NATO Rail, Shoe Mount, QD Socket
• Aluminum & Carbon Fiber Construction

• Camera Cage with Top Handle
• Unrestricted Access to Controls & Ports
• 1/4"-20, 3/8"-16, NATO Rail & Shoe Mount
• 3-Point Anti-Twist Locking Design
• HDMI/USB-C Cable Clamp
• Ergonomic Design for Handheld Comfort
• Arca-Type Quick Release Plate
• Strap Slots, QD Socket

• Mount Camera on Flat, Dry Surface
• 50 kg Maximum Horizontal Payload
• Durable Aluminum & Plastic Construction
• 1/4"-20 & 3/8"-16 Mounting Threads
• Pump Button to Create Vacuum
• Dust Cover Included

• Formfitting Cage for Lumix S5 II/S5 IIX
• HDMI/USB-C Cable Clamp
• 1/4"-20 & 3/8"-16 Accessory Threads
• Strap Slots, QD Socket
• NATO Clamp Top Handle
• Integrated Arca-Type Base
• Multiple Shoe Mounts on Handle & Cage
• Durable Aluminum Design

• Mounts via ARRI-Style Anti-Twist Screw
• Handle Adjusts within 3.1" Sliding Range
• Aluminum Construction
• Shoe Mounts on Front and Back
• 1/4"-20 and 3/8"-16 Accessory Threads
• Includes Allen Wrench to Tighten Screw

• Formfitting Camera Cage
• Shoe Mount on Top, 2 x Side NATO Rails
• Maintains Access to Ports & Controls
• Durable Aluminum Construction
• 1/4"-20 & 3/8"-16 Accessory Threads
• Integrated Arca-Type Base, Side Locks
• 1/4"-20 Camera Screw, Silicone Base Pad
• Wrench Stores on Bottom

• Arca-Swiss quick-release plates for quick switch between horizontal and vertical modes.
• The hinge arm at the battery door gives access to the battery door and enhances the grip experience
• Arca-Swiss quick-release plate supports Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro stabilizers.
• Accessory mounting points: 1/4"-20 threaded hole, QD socket, etc.
• A stretchable side plate allows cables through in vertical shooting.
• Built-in magnetic wrench for easy disassembly and assembly.

• Handheld cage kit for Sony FX30 / FX3, with hand strap to facilitate shooting
• XLR handle extension for improved grip experience and added accessory mounts
• Dedicated HDMI cable clamp ensures stable signal transmission
• 1/4"-20 threaded holes, ARRI 3/8"-16 locating holes, cold shoe mounts, NATO rails, QD port for handle, microphone, LED light, monitor, hand strap, etc.
• Arca-Swiss quick release plate at the bottom for quick switch between tripod mode and handheld mode

• Built-in AirTag Mounting Compartment
• Arca-Type Quick Release Plate
• 3x 1/4"-20 Female Threaded Mounts
• Wrist Strap Loop
• Track AirTag up to 32.8' via Bluetooth
• 1/4"-20 Steel Camera Mounting Screw
• EVA Anti-Vibration Pad

• Modular Follow Focus
• New material and fine-tune ability
• Adjustable non-stop damping feels comfortable
• 3-step switch to reverse rotation
• Modular design with high compatibility
• Detachable palm support for shooting stability
• Friction-driven lenses, streamlined mounting

• Formfitting Camera Cage
• Arca-Type Base, Shoe Mount, NATO Rail
• 1/4"-20 & 3/8"-16 Accessory Threads
• 1/4"-20 Screw, QD Mounts, Strap Slots
• Maintains Access to Camera Controls
• Durable Aluminum Construction

• Formfitting Aluminum Cage
• M2.5 Anti-Twist Locking Side Screws
• Multiple 1/4"-20 and 3/8"-16 Threads
• Integrated Bottom/Side Arca-Type Mounts
• 2 x Built-In Shoe Mounts, QD Mounts
• Allen Wrench Stores on Bottom of Cage
• Durable Aluminum Construction

• Camera Top & Side Plates
• Quick Release Baseplate
• V-Mount Plate with D-Tap Power Cable
• Horizontal & Vertical Mounting
• 1/4"-20 & 3/8"-16 Accessory Threads
• 3/8"-16 Anti-Twist Threads
• 1 x Cold Shoe Mount
• Durable Aluminum Construction

• Shoulder-Mount Rig for Sony FX6
• Top & Side Plates, LCD Rod Mount
• 15mm LWS Baseplate with 8" Rods
• 1 x Wooden Grip, 2 x Handgrip Extensions
• V-Mount Battery Plate, D-Tap Cable
• Universal Lens Support
• Shoulder Pad, Rosette Adapter
• Durable Aluminum Construction

• Control Wind Noise
• Control Lighting
• Reduces wind noise by about 20 dB
• Magnetic mounting.
• Removable and reusable no-trace adhesive.

• Designed to Mimic Window Light
• Exterior Support Ribs
• Ideal for Product and Portraits
• Compatible with Bowens-Mount Lights

• Side Handle for Camera Cage
• For Right- or Left-Side Use
• Quick-Locking NATO Clamp
• 1/4"-20 Threads, Wrist Strap Slot
• Cold Shoe Mount, 26.4 lb Load Capacity
• 1.4" Vertical Adjustment
• Built-In Magnetic Allen Key

• Add a Dual 15mm Rod Clamp to Your Rig
• Compatible with H60 and 3010 Series FF
• Adjustable Rod Distance
• Durable Aluminum Construction
• Extends your 15mm Rig for Follow Focus
• Fits Near Lenses up to 114mm Diameter
• Compatible with Standard 15mm Rods

• Mount Camera and Zoom Lens to Gimbal
• Lowers Center of Gravity by 0.4"
• Two Safety Pins
• Vertical and Horizontal Orientations
• Thumbscrew, Locking Lever

• For DJI RS 3 Mini
• Quick Release Baseplate
• Lowers Center of Gravity
• Locking Lever
• Provides additional length for more creative shooting angles.
• Improves balance when using larger camera setups.
• Easy to install with included mounting screws.

• Lightweight Aluminum Baseplate
• 15mm LWS Rod Support
• Multiple Mounting Threads on Base
• 1/4"-20 & 3/8"-16 Camera Mounting Screws
• Works with BMPCC 6K Pro Cage 3270
• Maintains 3.3" Optical Height with Cage
• Rubber Pads Protect & Prevent Twisting

• USB-C charging port
• Pioneering high-current charging (5V 2.2A)
• 2400mAh nominal capacity
• Visually distinctive colour
• Fully decoded, wide compatibility
• Quality battery cell

• USB-C charging port
• Pioneering high-current charging (5V 2.2A)
• 2400mAh nominal capacity
• Visually distinctive colour
• Fully decoded, wide compatibility
• Quality battery cell

• Add NATO Rail to Your Rig
• 0.5 cm Thin Low-Profile Design
• 7 cm Long, 2 x Safety Pins
• Mounts with 2 x 1/4"-20 Screws
• Aluminum Construction

• Extend FX3 XLR Handle Grip by 3.048 cm
• Shoe Mount, Removable NATO Rail
• Durable Aluminum Construction
• 1/4"-20 and 3/8"-16 Accessory Threads
• Installs with 2 x 1/4"-20 Screws

• For Sony A-Series, FX3 & FX30
• For Arca-Type & RC2 Tripod Heads
• Full Access to Buttons & Ports
• Provides Multiple Mounting Points

• For Canon R-Series
• For Arca-Type & RC2 Tripod Heads
• Full Access to Buttons & Ports
• Provides Multiple Mounting Points

• For FUJIFILM GFX System
• For Arca-Type & RC2 Tripod Heads
• Full Access to Buttons & Ports
• Provides Multiple Mounting Points
•  

• Full Camera Cage for Sony FX3/FX30
• 1/4"-20 & 3/8"-16 Accessory Threads
• HDMI Cable Clamp, Arca-Style Base
• ARRI-Style Accessory Mounts
• Shoe Mount, Removable NATO Rail
• Camera Mounts with Bottom/Side Screws
• Rubber Pad on Base, Side Strap Slots
• Built-In Screwdriver
• Durable Aluminum Construction

• Revolutionized zoom in/out design
• New heat dissipation technology
• Improved illumination
• Works with SmallRig 8-leaf Barndoors for additional creative effects
• Storage bag for greater protection while transportation

• USB-C input/output port and USB-A output port (as a power bank)
• Supports 20W USB PD to be fully charged in six hours
• 10,500mAh nominal capacity for longer runtimes
• LED battery indicators
• Visually distinctive colour
• Quality battery cell, with a safe and reliable circuit for stable voltage and current output.

• Support SmallRig's new quick-release ecosystem, also compatible with the traditional 1/4"-20 screw connection products.
• MagSafe for iPhone in static scenarios.
• Click to lock for Android phones or in dynamic scenarios.
• Widely adaptable to a variety of mobile phones, without blocking the phone's buttons.
• All new family design.

• Brand-new design and coloring: gun brown curved surfaces embellished with golden lines
• Perfectly repeats Nikon Z 8 elements: the gold ring, red marks, and retro leather
• Detachable cold shoe: for extra LED video light or microphone
• Multiple accessory mounts: 1/4"-20 threaded hole, 3/8"-16 threaded hole, ARRI 3/8" -16 locating hole, NATO rail, QD socket, etc.
• Arca-Swiss Quick Release plate for Arca-type tripods and DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals.

• Brand-new design and coloring: gun brown curved surfaces embellished with golden lines
• Perfectly repeats Nikon Z 8 elements: the gold ring, red marks, and retro leather
• Press and flip design of the cable clamp: open the interface cover without disassembling
• Detachable cold shoe: for extra LED video light or microphone
• Ergonomic handle: contains hidden 1/4"-20 screw, 3/8"-16 screw, and two M2.5 screws
• Multiple accessory mounts: 1/4"-20 Threaded Hole, 3/8"-16 Threaded Hole, ARRI 3/8''-16 Locating Hole, Cold Shoe Mount, NATO Rail, etc.

• All-in-one design, ready to install and use, quickly build V-Mount battery power supply solution.
• Lightweight, compact, modular design supports more lightweight use.
• The bottom adopts a tensile structure, quick and long range (about 100mm) to adjust the center of gravity.
• The V-Mount plate is rotatable for easy storage and use of the camera's tail connector.
• Built-in Manfrotto 501 quick release plate at the bottom for quick switching between handheld and tripod.
• Comes with 15mm rod clamp, 15mm rods, and wireless receiver mounting bracket, which is convenient for mount follow focus, matte box, lens support, and other accessories.

• For Cameras Using Sony NP-FW50 Batteries
• 1030mAh / 7.4Wh Capacity, 7.2V Output
• 5V USB-C Charge Input
• Fast Charges to 100% in under 3 Hours
• Fire-Resistant Plastic Housing

• Compatible with NP-F type batteries, paired with DC to LP-E6NH dummy battery power cable, providing external power supply for Canon EOS R5 / R5C, BMPCC 4K / 6K / 6K Pro and various mirrorless cameras
• Aluminum alloy and gold-plated electrical contacts make it more durable and conductive
• Allows to access two devices with DC 7.4V and 12V dual output Maximum DC and USB-C output: 36W
• The USB-C interface supports bi-directional input and output with 36W power
• Features automatic wake-up and sleep modes to avoid damage to the camera
• Comes with USB-C mode and power indicators for easy viewing of charging and state of charge Each output port features short circuit and high current protection to ensure safety during using

• Mounts on Surface up to 2.1" Wide
• Adjustable Magic Arm with 1/4"-20 Screws
• 3-Prong Action Mount, Smartphone Holder
• 180° Mini Ball Head on Both Ends
• Load Capacity up to1.50 kg

• Specially designed for DJI RS 2 / RS 3 / RS 3 Pro; the shoulder straps together with the sling handgrip makes for easier shooting.
• Reduces burden on your arms in low-angle, high-angle, long-time standing shooting.
• Highly compatible: 1/4-20″ threaded hole, ARRI 3/8"-16 locating hole, cold shoe, and QD quick-release mount.
• Adjustable angle: handgrip tilts 0-180 degrees via a ratchet knob or acts as a side handle.
• Two slide buckles for easy adjustment of strap length.
• 1/4-20” and 3/8-16" threaded holes in the baseplate for tripods or other devices.

• For iPhone 15 Pro Max
• Includes Wireless Side Handle
• Multiple Cold Shoe Mounts
• Multiple 1/4"-20 Threaded Holes
• Wrist Strap Hole
• Compatible with M-Mount Lenses
• Swappable Lens Backplate
• Built-In Pads
• Allows Access to All Buttons and Ports
• Horizontal and Vertical Shooting

• For SmallRig's Quick Release Cage Series
• Mounts Vertically
• Serves as Top Handle
• Attach an LED Light or Mic
• Includes Quick Release Adapter

• Professional Tripod 75mm Ball Fluid Head
• Manfrotto Snap-In Quick Release Plate
• 360° Panning, +90/-60° Tilting
• 6-Step Counterbalance, 4-Step Drag
• Adjustable Pan Bar, 8 kg Maximum Load
• Weighs only 1.8 kg

• Dedicated full cage for Sony ZV-E10, providing accessory solutions and protection
• Ergonomically designed built-in handle for enhanced grip experience
• Comes with detachable anti-twist lock for stability
• Built-in Arca-type quick-release plate on the bottom allows quick scene-switching
• Multiple accessory mounting points, including 1/4" -20 holes, ARRI 3/8" -16 locating holes, and cold shoe mounts