The SmartRig+ Di from Saramonic is a two-channel audio interface that allows you to connect professional microphones or guitars to your iPhone, iPad, and iPod touch device. With a lightning connector output, the interface can be used to record stereo sound or music to your iOS portable device.
The SmartRig+ Di provides 48V phantom power for condenser microphones and is equipped with two XLR inputs, two 1/8" inputs, and two 1/4" inputs, and an 1/8" headphone output for real-time monitoring. There are two gain-control thumbwheels that make it easy to set levels for each channel separately.
- MPN - SARAMONIC-SMARTRIG+Di
- GTIN - 4897040886840
+ Read more
| Name | Value |
|---|---|
| THD+N | Less than 0.01% @ 1 kHz, -30 dBu input |
| Headphone Connector | 1/8" / 3.5 mm jack |
| Gain | + 23 dBu to - ? |
| Audio Output Connector | Lightning connector output cable |
| Phantom Power | 48 V power on/off switch |
| Audio Input Connector | 1 x Combo 1/4" / 6.35 mm and XLR input |
| Audio frequency response | 20 Hz to 20 kHz +/-0.5 dB |
| Dimensions | 88.0 x 41.0 x 42.0 mm (LxWxH) |
| Weight | 75.0 g |
| Signal to Noise Ratio | 80 dB @ 1 kHz, -30 dBu input |
| Power Requirements | 1 x 9 V alkaline or lithium battery |
+ Read more
Write Your Own Review
+ Read more
What’s In The Box
Saramonic SmartRig+ Di, Two-Channel Mic and Guitar Interface with Lightning Connector for iOS Devices
+ Read more
Read Our Helpful Buying Guides
