The store will not work correctly in the case when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies.Learn more.
This grey 3 Legged Thing Tripod Kit includes a grey Winston 2.0 Tripod and grey AirHed Pro Ball Head. Together, the tripod and ball head form a support system that features three detachable legs and a removable centre column. With the ball head, each leg can be configured as a monopod with up to a 153 cm height or can be combined with the centre column to form a monopod with up to 200 cm in height.
Tripod heads such as the AirHed Pro Ball Head that are compatible with a 3/8"-16 mount can be connected to the top of the Winston 2.0 Tripod. When combined and configured as a tripod, the Winston 2.0 Tripod and AirHed Pro Ball Head support up to 40 kg and measures 61 cm when folded. Each of the tripod's 3-section legs features an independent spread, a 3-position angle lock, and twist locks for rapid deployment. The Winston 2.0 Tripod and AirHed Pro Ball Head can be set at a minimum height of 23 cm when the tripod's push-and-pull, rapid centre column is removed. Together, the three legs can be extended to obtain a maximum height of 149 or 194 cm with the centre column fully raised along with the ball head. Each of the carbon fibre legs includes a removable rubber foot, which can be substituted with separately available spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil.
For added versatility, the Winston 2.0 Tripod's three removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a tabletop tripod. A carry bag with a strap is provided for storage and transport.
The AirHed Pro Ball Head is an Arca-type ball head with a load capacity of 40 kg and can be attached to tripods or other support systems that feature a 3/8"-16 mount. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included QR-OCTA Quick Release Plate. The quick-release plate can be attached or removed from the integrated clamp located at the top of the head's ball-and-socket joint by tightening or loosening the clamp's knurled, locking knob. Dual retaining screws are included for use along the underside of the plate. These screws prevent the plate from accidentally sliding off the ball head when the clamp is opened. The quick-release plate features a rubberized, non-slip platform while a built-in bubble level along the edge of the clamp opposite the clamp's locking knob accommodates landscape orientations.
By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swivelled, angled, fully tilted, or returned to its upright position. Under the primary locking knob is a secondary locking knob, which controls the ability to rotate the head 360°.
Key Features of the 3 Legged Thing - Pro 2.0 Winston & AirHed Pro Grey
Load Capacity: 40 kg
Max height: 194 cm, Min height: 23 cm
Folded Length: 61 cm
Leg Sections: 3, Weight: 2 kg
Carbon Fiber Legs, Bubble Level
Twist Locks, Rubber Feet
3-Position Leg Angle Locks
Reversible, Rapid Column
Monopod-Convertible Legs and Column
AirHed Pro Ball Head, Arca-Type
Tripod and Ball Head
The arca-type ball head and carbon-fibre tripod with 3/8"-16 mount
Tripod features three detachable legs and a removable centre column
With a ball head, each leg can be configured as a monopod with up to a 153 cm height or can be combined with the centre column to form a monopod with up to 200 cm height
Tripod configuration with a ball head, supports up to 40 kg
Push-and-pull centre column with for rapid camera, lens, or sport optic positioning
Center column D-ring to accommodate ballast for additional stability
Can be set for a minimum height of 66 or 23 cm without the centre column
With a ball head, all three legs can be extended in the tripod configuration to obtain a maximum height of 149 cm or 194 cm with the centre column fully raised
The Center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them
Legs each feature 3 sections with twist locks for rapid deployment and can be independently spread
Legs can be locked at 23, 55, or 80° angles
Rubber feet help to enhance stability on a wide variety of surfaces
Weighs 2 kg and measures 61 cm when all three legs are reversed 180° and folded
Rubber feet can be removed and substituted with separately available 3 Legged Thing spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil
Removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a table-top tripod
3 Legged Thing Toolz multi-tool to adjust miscellaneous component screws
Ball head microfiber bag
Tripod kit carry bag with a strap for storage and transport
AirHed Pro Ball Head
Arca-type ball head with 88 lb load capacity
Compatible with tripods or support systems that feature a 3/8"-16 mount
Uses ball-and-socket joint to help maximize pan-and-tilt flexibility
The ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place
Large primary locking knob with knurled surface allows ball-and-socket joint to be quickly swivelled, angled, fully tilted, or returned to its upright position
A secondary locking knob with knurled surface allows the head to rotate 360°
Integrated clamp on top of the ball-and-socket joint is compatible with included QR-OCTA Quick Release Plate
This grey 3 Legged Thing Tripod Kit includes a grey Winston 2.0 Tripod and grey AirHed Pro Ball Head. Together, the tripod and ball head form a support system that features three detachable legs and a removable centre column. With the ball head, each leg can be configured as a monopod with up to a 153 cm height or can be combined with the centre column to form a monopod with up to 200 cm in height.
Tripod heads such as the AirHed Pro Ball Head that are compatible with a 3/8"-16 mount can be connected to the top of the Winston 2.0 Tripod. When combined and configured as a tripod, the Winston 2.0 Tripod and AirHed Pro Ball Head support up to 40 kg and measures 61 cm when folded. Each of the tripod's 3-section legs features an independent spread, a 3-position angle lock, and twist locks for rapid deployment. The Winston 2.0 Tripod and AirHed Pro Ball Head can be set at a minimum height of 23 cm when the tripod's push-and-pull, rapid centre column is removed. Together, the three legs can be extended to obtain a maximum height of 149 or 194 cm with the centre column fully raised along with the ball head. Each of the carbon fibre legs includes a removable rubber foot, which can be substituted with separately available spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil.
For added versatility, the Winston 2.0 Tripod's three removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a tabletop tripod. A carry bag with a strap is provided for storage and transport.
The AirHed Pro Ball Head is an Arca-type ball head with a load capacity of 40 kg and can be attached to tripods or other support systems that feature a 3/8"-16 mount. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included QR-OCTA Quick Release Plate. The quick-release plate can be attached or removed from the integrated clamp located at the top of the head's ball-and-socket joint by tightening or loosening the clamp's knurled, locking knob. Dual retaining screws are included for use along the underside of the plate. These screws prevent the plate from accidentally sliding off the ball head when the clamp is opened. The quick-release plate features a rubberized, non-slip platform while a built-in bubble level along the edge of the clamp opposite the clamp's locking knob accommodates landscape orientations.
By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swivelled, angled, fully tilted, or returned to its upright position. Under the primary locking knob is a secondary locking knob, which controls the ability to rotate the head 360°.
Key Features of the 3 Legged Thing - Pro 2.0 Winston & AirHed Pro Grey
Load Capacity: 40 kg
Max height: 194 cm, Min height: 23 cm
Folded Length: 61 cm
Leg Sections: 3, Weight: 2 kg
Carbon Fiber Legs, Bubble Level
Twist Locks, Rubber Feet
3-Position Leg Angle Locks
Reversible, Rapid Column
Monopod-Convertible Legs and Column
AirHed Pro Ball Head, Arca-Type
Tripod and Ball Head
The arca-type ball head and carbon-fibre tripod with 3/8"-16 mount
Tripod features three detachable legs and a removable centre column
With a ball head, each leg can be configured as a monopod with up to a 153 cm height or can be combined with the centre column to form a monopod with up to 200 cm height
Tripod configuration with a ball head, supports up to 40 kg
Push-and-pull centre column with for rapid camera, lens, or sport optic positioning
Center column D-ring to accommodate ballast for additional stability
Can be set for a minimum height of 66 or 23 cm without the centre column
With a ball head, all three legs can be extended in the tripod configuration to obtain a maximum height of 149 cm or 194 cm with the centre column fully raised
The Center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them
Legs each feature 3 sections with twist locks for rapid deployment and can be independently spread
Legs can be locked at 23, 55, or 80° angles
Rubber feet help to enhance stability on a wide variety of surfaces
Weighs 2 kg and measures 61 cm when all three legs are reversed 180° and folded
Rubber feet can be removed and substituted with separately available 3 Legged Thing spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil
Removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a table-top tripod
3 Legged Thing Toolz multi-tool to adjust miscellaneous component screws
Ball head microfiber bag
Tripod kit carry bag with a strap for storage and transport
AirHed Pro Ball Head
Arca-type ball head with 88 lb load capacity
Compatible with tripods or support systems that feature a 3/8"-16 mount
Uses ball-and-socket joint to help maximize pan-and-tilt flexibility
The ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place
Large primary locking knob with knurled surface allows ball-and-socket joint to be quickly swivelled, angled, fully tilted, or returned to its upright position
A secondary locking knob with knurled surface allows the head to rotate 360°
Integrated clamp on top of the ball-and-socket joint is compatible with included QR-OCTA Quick Release Plate
