The store will not work correctly in the case when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies.Learn more.
The grey 3 Legged Thing AirHed Pro Ball Head is an Arca-type ball head with a load capacity of 40 kg and can be attached to tripods or other support systems that feature a 3/8"-16 mount. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included QR-OCTA Quick Release Plate. The quick-release plate can be attached or removed from the integrated clamp located at the top of the head's ball-and-socket joint by tightening or loosening the clamp's knurled, locking knob. Dual retaining screws are included for use along the underside of the plate. These screws prevent the plate from accidentally sliding off the ball head when the clamp is opened. The quick-release plate features a rubberized, non-slip platform while a built-in bubble level along the edge of the clamp opposite the clamp's locking knob accommodates landscape orientations.
By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swivelled, angled, fully tilted, or returned to its upright position. Under the primary locking knob is a secondary locking knob, which controls the ability to rotate the head 360°.
Key Features of the 3 Legged Thing - AirHed Pro Grey Ball Head
AirHed Pro Ball Head
Arca-type ball head with 88 lb load capacity
Compatible with tripods or support systems that feature a 3/8"-16 mount
Uses ball-and-socket joint to help maximize pan-and-tilt flexibility
Ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place
Large primary locking knob with knurled surface allows ball-and-socket joint to be quickly swivelled, angled, fully tilted, or returned to its upright position
Secondary locking knob with knurled surface allows the head to rotate 360°
Integrated clamp on top of on the ball-and-socket joint is compatible with included QR-OCTA Quick Release Plate
The grey 3 Legged Thing AirHed Pro Ball Head is an Arca-type ball head with a load capacity of 40 kg and can be attached to tripods or other support systems that feature a 3/8"-16 mount. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included QR-OCTA Quick Release Plate. The quick-release plate can be attached or removed from the integrated clamp located at the top of the head's ball-and-socket joint by tightening or loosening the clamp's knurled, locking knob. Dual retaining screws are included for use along the underside of the plate. These screws prevent the plate from accidentally sliding off the ball head when the clamp is opened. The quick-release plate features a rubberized, non-slip platform while a built-in bubble level along the edge of the clamp opposite the clamp's locking knob accommodates landscape orientations.
By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swivelled, angled, fully tilted, or returned to its upright position. Under the primary locking knob is a secondary locking knob, which controls the ability to rotate the head 360°.
Key Features of the 3 Legged Thing - AirHed Pro Grey Ball Head
AirHed Pro Ball Head
Arca-type ball head with 88 lb load capacity
Compatible with tripods or support systems that feature a 3/8"-16 mount
Uses ball-and-socket joint to help maximize pan-and-tilt flexibility
Ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place
Large primary locking knob with knurled surface allows ball-and-socket joint to be quickly swivelled, angled, fully tilted, or returned to its upright position
Secondary locking knob with knurled surface allows the head to rotate 360°
Integrated clamp on top of on the ball-and-socket joint is compatible with included QR-OCTA Quick Release Plate
What is the weight of the AirHed Pro Grey Ball Head?
The AirHed Pro Grey Ball Head weighs approximately 0.88 pounds or 400 grams.
What is the maximum load capacity of the AirHed Pro Grey Ball Head?
The AirHed Pro Grey Ball Head has a maximum load capacity of 50 pounds or 23 kilograms.
What type of tripod is compatible with the AirHed Pro Grey Ball Head?
The AirHed Pro Grey Ball Head is compatible with most tripods that have a standard 3/8"-16 screw thread. It is also compatible with 3 Legged Thing's own range of tripods.
Does the AirHed Pro Grey Ball Head come with a quick release plate?
Yes, the AirHed Pro Grey Ball Head comes with an Arca Swiss compatible quick release plate for easy and quick setup.
What is the diameter of the ball on the AirHed Pro Grey Ball Head?
The diameter of the ball on the AirHed Pro Grey Ball Head is 40 mm.
Can the tension on the ball head be adjusted?
Yes, the AirHed Pro Grey Ball Head has a tension control mechanism that allows you to adjust the tension on the ball based on the weight of your camera and lens.
Is the AirHed Pro Grey Ball Head compatible with vertical shooting?
Yes, the AirHed Pro Grey Ball Head has a panning feature that allows for smooth vertical shooting and panoramic photography.
What is the warranty for the AirHed Pro Grey Ball Head?
The AirHed Pro Grey Ball Head comes with a 5 year worldwide warranty, giving you peace of mind and assurance of the product's quality.
Does the AirHed Pro Grey Ball Head come with a bubble level?
Yes, the AirHed Pro Grey Ball Head has a built-in bubble level to ensure your camera is always level.
Is the AirHed Pro Grey Ball Head weather-resistant?
Yes, the AirHed Pro Grey Ball Head is made of durable and weather-resistant materials, making it suitable for use in various weather conditions.
Can I mount other accessories on the AirHed Pro Grey Ball Head?
Yes, the AirHed Pro Grey Ball Head has a 3/8"-16 thread on the bottom and a 1/4"-20 thread on the top which allows you to mount other accessories such as a monitor or microphone.
