Pelican 1507 Air Case - Black with Foam

This literation of the black Pelican 1507AirWF Hard Carry Case is designed for you to maximize its available space while providing customized protection for your valuable gear. You get the 1507 case with two layers of Pick-N-Pluck foam that allows you to customize the interior to your specific gear to ensure it is fully protected. Additionally, there is a convoluted egg-crate insert for the inside of the lid and a foam base layer for the bottom of the case to complete the cushioned protection.

Pelican 1507AirNF Hard Carry Case with Liner, No Insert (Black)

Built for strength and portability, the black Pelican 1507AirNF Hard Carry Case is designed to be dustproof, fully watertight, and crushproof to protect your valuable gear against the harshest handling, shipping, and environmental conditions on the planet. This edition of the 1507Air comes lined, but without foam or other inserts, allowing you the freedom to completely customize the 38 x 29 x 21 cm interior to your specific needs and to your specific gear.

Your case is made of a super-light proprietary HPX2 polymer, with honeycomb structural elements, which is up to 40% lighter than most other Pelican polymers and has newly designed dual push-button latches that provide ease-of-use versus previous iterations. Case design features include an O-ring that seals it to an IP67-rating to be dust and waterproof, dual 5/16" (8mm) diameter stainless steel reinforced padlock holes, and a pressure relief valve. This valve regulates the internal pressure, keeping your gear and the case from getting crushed and allowing you to open the case without having to break a tough pressurized seal that may develop. A polycarbonate cardholder may be placed on the front or side of the case.

Key Features of the Pelican 1507AirNF Hard Carry Case with Liner, No Insert (Black)

• Watertight, Dust and Crushproof Case
• 38 x 29 x 21 cm Interior Space
• Made of Super-Light HPX2 Polymer
• Redesigned Push-Button Latches
• Customizable Pick-N-Pluck Foam Insert
• IP67 Watertight O-Ring Gasket
• Pressure-Equalization Purge Valve
• Stainless Steel Hasp Protectors
• Rubber Overmolded Handle
• Polycarbonate Card Holder

Pelican 4-Piece Foam Set for 1507Air Case

Designed for their 1507Air case, the Pelican 4-Piece Foam Set can be used to replace the foam that came with your case, or if you need to put a different gear in it than you originally intended, or as an option, if you bought the case without foam. This set consists of a convoluted egg crate foam lid insert, a base layer for the bottom of the case, and two pieces of customizable Pick-N-Pluck foam. Pelican recommends that you leave at least an inch of foam between your gear and the inside walls of the case to make sure it is well protected.

Key Features of the Pelican 4-Piece Foam Set for 1507Air Case

• Protect Gear from Impacts
• Customizable Pick-N-Pluck Foam
• Convoluted Eggcrate Lid Foam
• Protective Base Layer

• MPN - 1507AIRB
• GTIN - 019428176105