Nikon ML-3 Modulite Remote Control Set

SKU
108046
Was $329.00
$279.65
Request a pricematch
In stock
Earn 559 Qantas Points
*NO SURCHARGES APPLY
$329.00
product overview
product overview
  • Short-circuit Protection and Overcharge protection.No memory effect.
  • Do not connect improperly.
  • Higher capacity than original battery ,lasting longer, record more wonderful moments.
  • Do not dispose of battery in fire as they may explode.

The Nikon ML-3 Modulite Remote Control Set is a remote control for two separate channels via an infrared LED beam, enabling automatic camera operation from a distance of up to about 7.9m Auto triggering, delayed shutter release, single and continuous shooting are possible. The Nikon ML-3 (10 Pin System) Modulite Remote Control Set is for use with Nikon cameras: N90, N90S, F100, F5, F6, D1, D2 & D3 series and D100, D200, D300, D300s, D700 DSLR Cameras. Also, it can be used with the D100 with MB-D100, D200, D300, D300s, D700 battery packs. It enables remote control for two separate channels via an infrared LED beam, providing automatic camera operation from a distance of up to about 26-feet (8 m). Auto triggering, delayed shutter release, single and continuous shooting are possible. It can also fire the camera remotely when a subject moves between the transmitter and receiver, for surveillance or wildlife photography.

The ML-3 is designed so the transmission button operates the same way as the shutter release button of the camera. Lightly pressing on the transmission button turns on the camera's exposure meter and starts autofocus detection.

To connect the ML-3, the receiver is inserted and locked into a camera's or Speedlight bracket's accessory or hot shoe and is then connected to the remote terminal on the camera with its remote cord. The camera is fired when the transmitter is pointed in the direction of the receiver's sensor and the transmit button is pushed. Recommended camera settings are C or M focus modes, Programmed Auto (P/Ps), Aperture-Priority Auto or Shutter-Priority Auto, L or H film advance modes.


Key Features of the Nikon ML-3 Modulite Remote Control Set

  • Wireless Remote Shutter Release
  • Minimizes Vibrations
  • Good for Close-ups & Time Exposures
  • Cord Length 28cm
  • For Nikon 10-Pin Cameras

Nikon ML-3 Modulite Remote Control Set Compatibility

The Nikon ML-3 Modulite Remote Control Set is compatible with a range of devices such as the D5, D4S, and the D4. For a list of compatible products* please see our specification tab.

* as of February 2020

Are you unsure if the Nikon ML-3 Modulite Remote Control Set will be compatible with your device?

At digiDirect, we pride ourselves on our product knowledge, and the lengths we’ll go to find our customers the gear that is right for them. Our staff are on-hand and ready to help you in any way they can! All you need do is reach out and contact us via our contact form, by giving us a call, or by visiting your local digiDirect store.


  • MPN - FRW20101
  • GTIN - 018208046454
+ Read more
Release Type Wireless: IR (Infrared)
Camera Connection Nikon 10-pin
Channels 3
Interval Timer/Programmable No
Live View No
Mobile Device/App-enabled No
Cable Length 28 cm
Wireless Range 8 m
Operating Temperature -4 to 140°F / -20 to 60°C
Receiver Dimensions 5.0 x 3.6 x 4.7 cm
Receiver Power Source Camera
Receiver Weight 0.51 kg (without batteries)
Transmitter Power Source Battery
Transmitter Battery Requirements AAA 2
Transmitter Dimensions 11.7 x 2.2 x 3.0 cm
Transmitter Weight 0.40 kg (without batteries)

Nikon ML-3 Modulite Remote Control Set Compatibility

Compatible Cameras D5
D4S
D4
D3S
D3X
D3
D2H
D2X
D2Xs
D2Hx
D850
D810A
D810
D800E
D800
D700
D500
D300S
D300
D200
+ Read more
Write Your Own Review
You're reviewing:Nikon ML-3 Modulite Remote Control Set
Your Rating
+ Read more
What’s In The Box
  • Nikon ML-3 Modulite Remote Control Set
+ Read more