The IDX Bundle Includes 4x ID-CUE-H90 Batteries and 1x VL-4X 4-Channel Dual, and is assembled to provide you with a flexible power solution that can quickly charge the included batteries, so you can keep shooting without interruption from loss of battery power. The kit includes four 90Wh V-mount batteries that can power your camera, and each battery features an integrated D-Tap for powering accessories. Each battery also incorporates an LED gauge that shows you the remaining battery power level at a glance.
The charger has four V-mount battery bays that allow you to mount up to four batteries at a time. The charger utilizes simultaneous/sequential charging, which means it will simultaneously charge the first two batteries mounted on the charger. Once those are charged, the charger will automatically start charging the next batteries. It features a fanless design and a built-in carry handle. The charger is powered through a 4-pin XLR input connector from an included 90W power supply, which can also be used by itself to power a camera.
Power your camera or other pro video equipment with the IDX System Technology CUE-H90 90Wh Compact Li-Ion V-Mount Battery. The battery can supply up to 16.8 VDC to the plate, and it can also provide up to 80W to power accessories through the integrated D-Tap output. CUE-H90 batteries feature a nominal voltage of 14.8 VDC, a maximum output voltage of 16.8 VDC, and a maximum 7A draw.
CUE-H-series batteries feature an even higher capacity than their CUE-D predecessor while maintaining the same internal pack design that isolates it for reliability and safety. There is also built-in prevention of overcharging, over-discharging, or overcurrent. IDX CUE-H90 batteries should be charged using IDX-branded chargers; third-party chargers may not charge CUE-H90 batteries correctly.
IDX System Technology VL-4X 4-Channel V-Mount Charger with Power Supply supports lithium-ion V-mount batteries and features sequential charging for four batteries, automatically switching to the second battery after fully charging the first, and it features simultaneous charging for two batteries when on opposite sides. It delivers up to 2.7A of quick-charge current without the noise of a typical charger thanks to a fanless design.
This portable desktop charger is designed with reliable internal safety features that protect both the battery and charger from damage should faulty or misused batteries be placed on the charger. It will automatically stop charging if any attached battery reaches an overvoltage condition. It features a support stand to keep the charger upright on a flat surface.
|Mount / Series Type||V-Mount|
|Capacity (Wh)||90 Wh|
|Output Voltage||14.4 VDC|
|Maximum Load||7 A (Peak)|
|Accessory Port||D-Tap Output 80W|
|Storage Temperature||-4 to 113°F / -20 to 45°C|
|Charging Temperature||32 to 104°F / 0 to 40°C|
|Discharging Temperature||-4 to 113°F / -20 to 45°C|
|Dimensions||14.6 x 9.7 x 3.9 cm|
|Mount / Series Type||V-Mount|
|Number of Battery Bays||4|
|Output Connector||4-Pin XLR Female|
|AC Input Power||100 to 240 VAC, 50 / 60 Hz|
|Maximum Wattage||220 W|
|Operating Temperature||32 to 104°F / 0 to 40°C|
|Operating Humidity||20 to 90%|
|Dimensions||9.1 x 17.8 x 24.9 cm|