HPRC 2600 - Hard Case with Second Skin Divider Kit (Blue)

SKU
129450
$349.00
Request a pricematch
In stock
Earn 698 Qantas Points
$349.00
product overview
product overview
  • Rigid, Rolling Case
  • Dust and Waterproof, Low-Profile Wheels
  • Impact and Corrosion Resistant
  • Single-Stage Extendable Handle

The HPRC 2600 - Hard Case with Second Skin Divider Kit (Blue) provides up to 48.2 x 35.8 x 21.8cm of capacity and is designed to protect its contents from impacts, moisture, dirt, or corrosion. Built-in, low-profile wheels, along with a single-stage extendable handle, allow for easy movement of heavy loads. For instances where it must be lifted off the ground, two ergonomic carry handles are provided, a large side handles, and a top handle for use when this rolling case is placed upright on its wheels. Utilizing a polypropylene, fiberglass, rubber, and stainless-steel construction, the HPRC 2600W Rolling Resin Case is ATA 300, IP67, STANAG 4280, and DS 81-41 complaint. When closed, this rolling case's interior is fully sealed from dust, as well as water from 14.9 to 8.3cm deep, while providing long-lasting resistance to wear-and-tear.

While the extendable handle is retracted, the carry handles can also be folded downward, helping to reduce the amount of space occupied by the HPRC 2600W Rolling Resin Case whether it is placed upright, or on its base. Four, molded feet elevate the base, protecting it from wet and abrasive surfaces. While its lid faces upward, the rolling case's interior can be reached by opening the four latches along the lid. The base and lid are joined by a pair of heavy-duty hinges, while the latches' double-hinged design prevents the HPRC 2600W Rolling Resin Case from accidentally opening due to bumps or shocks when in transit.

Both the base and lid also include a pair of shackle eyelets that align when closing the HPRC 2600W Rolling Resin Case. Two separately available padlocks with 1/4" diameter shackles can then be installed along with the side handle for enhanced security. While closed, a built-in valve automatically equalizes air pressure between the interior and exterior of the rolling case. This pressure valve is water-resistant and further prevents the HPRC 2600W Rolling Resin Case from accidentally opening during air travel or when moving from areas of low altitude to high altitude.

An HPRC Second Skin and Dividers Kit for the HPRC 2600W Resin Case is also provided. Once installed, this divider kit helps maximize available carrying space and further protects equipment or valuables for transport. The HPRC Second Skin and Dividers Kit include a one-piece, drop-in insert along with 10, touch-tab dividers. The insert's molded, nylon construction creates a custom fit that cushions the sides and bottom of an HPRC 2600W Resin Case, while the non-abrasive dividers provide an interior organization that can easily be rearranged.


Key Features of the HPRC 2600 - Hard Case with Second Skin Divider Kit (Blue)

  • Rolling case with up to 48.2 x 35.8 x 21.8 cm of capacity that is designed to protect its contents from impacts, moisture, dirt, or corrosion
  • Utilizes a polypropylene, fiberglass, rubber, and stainless-steel construction that is ATA 300, IP67, STANAG 4280, and DS 81-41 complaint
  • Fully sealed from dust, as well as water from 14.9 to 8.3 deep, while providing long-lasting resistance to wear-and-tear
  • Low-profile, built-in wheels and single-stage extendable handle allow for easy movement of heavy loads
  • Ergonomic, carry handles for instances where the rolling case must be lifted off the ground
  • Large side handle, and a top handle for use when this rolling case is placed upright on its wheels
  • Carry handles fold away, reducing the amount of space occupied by the rolling case
  • Four double-hinged latches prevent accidental opening due to bumps or shocks when in transit
  • Reinforced corners for enhanced protection from external shocks
  • Molded feet elevate the rolling case's base, protecting it from surface moisture and abrasions
  • Feet interlock with molded notches along the lid of another, closed HRPC 2600W Rolling Resin Case, allowing multiple HRPC 2600W Rolling Resin Cases to be safely stacked
  • A Built-in, water-resistant pressure valve further prevents the rolling case from accidentally opening during air travel or when moving from areas of low altitude to high altitude
  • Accommodates up to two separately available padlocks with 1/4" diameter shackles for enhanced security
  • HPRC Second Skin and Dividers Kit for 2600W Rolling Resin Case helps maximize available carrying space, protects equipment or valuables for transport, and provides an interior organization that can easily be rearranged
  • A see-through identification pocket along the case's front can be used to display a contents label or owner information
  • Second Skin and Dividers Kit includes a one-piece, drop-in insert along with 10 touch-tab dividers
  • The drop-in insert's molded, nylon construction creates a custom fit that cushions the sides and bottom of an HPRC 2600W Resin Case, while the non-abrasive dividers provide an interior organization that can easily be rearranged

  • MPN - HPRC2600SSKBLU
  • GTIN - 8033389477851
+ Read more
Material Polypropylene
fiberglass
rubber
stainless-steel
Type of Closure Double-hinged locks
Integrated eyelets for separately available padlocks with 1/4" diameter shackles
Carrying Options Top carry handle
Side carry handle
Extendable handle
Certifications & Ratings ATA 300
IP67
STANAG 4280
DS 81-41
Temperature Rating -40.0 to 176.0°F (-40.0 to 80.0°C)
Exterior 54.6 x 35.8 x 21.8 cm
Interior 48.2 x 35.8 x 21.8 cm
Weight With Second Skin and Dividers Kit: 7.4 kgs
+ Read more
Write Your Own Review
You're reviewing:HPRC 2600 - Hard Case with Second Skin Divider Kit (Blue)
Your Rating
+ Read more
What’s In The Box
  • HPRC 2600W Rolling Resin Case with Second Skin and Dividers Kit
  • HPRC Second Skin and Dividers Kit for HPRC2600W Series Wheeled Hard Case
+ Read more

Read Our Helpful Buying Guides

Helpful Buying Guide