Photolab
0
My Cart
Audioengine W3 Wireless Audio Adapter (Sender+Receiver)
Request a pricematch
Product Overview
- Up to 30 m Audio Transmission Range
- Plug-and-Play Design
- Uses a Dedicated Wi-Fi Network
- Works with Nearly Any Audio Component
- Expandable Design
+ Read more
Enjoy wireless audio playback with the Audioengine W3 Wireless Audio Adapter Bundle. The included transmitter connects to nearly any audio source via USB or 1/8" and sends the signal via a dedicated Wi-Fi network to the included receiver up to 30m away, which connects to your receiver or another powered component via 1/8". It can transmit to up to three total receivers with no loss in quality; additional receivers are optional and available separately.
Note: Product is shown in use for illustration Only, additional equipment is not included.
Key Features of the Audioengine W3 Wireless Audio Adapter (Sender + Receiver)
- Up to 30 m Audio Transmission Range
- Plug-and-Play Design
- Uses a Dedicated Wi-Fi Network
- Works with Nearly Any Audio Component
- Expandable Design
Wireless Audio Connectivity
The W3 wireless system is designed to transmit bit-perfect PCM stereo. Because the USB controller in the sender and the DAC in the receiver are segregated by the wireless subsystem, anomalies such as jitter, grounding, and induced cable noise are reduced. In addition, the W3 enables you to physically isolate a potentially noisy computer from the sensitive audio components in your system. The sender can also transmit to up to three receivers simultaneously, with the additional receivers sold separately.
TI CC8520 PurePath SoC
The W3 utilizes the TI CC8520 PurePath USB wireless system-on-a-chip (SoC) solution. The sender can be powered directly via the USB bus or from the included power adapter.
CS4344 DAC
The W3 receiver uses the CS4344 DAC (digital-to-analog converter) to help provide low noise and distortion.
Cut the Audio Cord
Enjoy wireless playback from nearly any audio device to nearly any component, including powered speakers, receivers, or a powered subwoofer. The W3 is designed to provide CD-quality audio wirelessly.
Interference-Free Design
Using its own Wi-Fi network, the W3 is engineered to provide interference-free audio without the dropouts, static, or noise that can be caused by your routers, phones, or other wireless devices.
Additional Features
- CS5343 ADC (analog-to-digital converter)
- 1V RMS output with a 470 Ohm impedance
- -65 dB crosstalk
- Up to 16-bit native input bit depth
- Up to 48 kHz native input sample rate
- Compatible with USB version 1.1 and up
- MPN - 90021935
- GTIN -819955260038
+ Read more
Wireless
| Wireless Range | 100' / 30.48 m |
|---|---|
| Wi-Fi | Yes |
Transmission
| SNR (Signal-to-Noise Ratio) | 95 dB |
|---|---|
| Frequency Response | 20 Hz to 20 kHz |
| THD (Total Harmonic Distortion) | 0.01% |
| Latency | < 20 ms |
Transmitter Interfaces
| Input Connectors | 1 x USB Type-A Male 1 x 1/8" / 3.5 mm (Stereo Analog) Female |
|---|
Receiver Interfaces
| Output Connectors | 1 x 1/8" / 3.5 mm (Stereo Analog) Female |
|---|
Power
| Transmitter Power Connector | 1 x USB Type-A Input |
|---|---|
| Receiver Power Connector | 1 x USB Type-A Input |
| Transmitter Power Consumption | 5 VDC at 180 mA |
| Receiver Power Consumption | 5 VDC at 150 mA |
Environmental
| Operating Temperature | 32 to 95°F / 0 to 35°C |
|---|---|
| Storage Temperature | -4 to 113°F / -20 to 45°C |
| Operating Humidity | 5 to 95% |
General
| Transmitter Dimensions | 1.18 x 0.39 x 3.94" / 30 x 10 x 100 mm |
|---|---|
| Receiver Dimensions | 1.18 x 0.39 x 3.94" / 30 x 10 x 100 mm |
+ Read more
Write Your Own Review
+ Read more
What’s In The Box
- Audioengine W3 Wireless Audio Adapter (Sender + Receiver)
- 50 cm 1/8" Audio Cable
- 30 cm 1/8" to RCA Cable
- USB Power Adapter
- RCA Adapter "Y" Cable
+ Read more