Nanlite PavoTube 30C 4ft (120cm) RGBW LED tube - 2KIT

Earn 985 Qantas Points
Product Overview

  • Dimming: 0 to 100 % continuous
  • Color Temperature: 2700K-6500K
  • Power Consumption: 32W x 5
  • Power Supply: 15 / 15 VDC at 3 A
+ Read more

With a 4.8cm diameter and a T12 form factor, the Nanlite PavoTube 30C 4ft (120cm) RGBW LED tube - 2KIT is ideal for hiding unobtrusively in small areas on a set or for shooting in vehicles such as cars, boats, or planes. The kit contains two PavoTube 30C 1.21m LED Lights complete with AC adapter mounting clips and a carrying bag. You can connect the lights together with the included sync cord.

Let your creativity run wild with these LED tubes. Put a splash of color onto a background, or light up your subject with a specific hue. The PavoTubes feature 0 to 100% dimming with maximum illumination of 2850 lumens at 5600K, as well as a full spectrum RGB and pre-programmed special lighting effects. With the color temperature adjustable from 6500-2700K, a CRI of 98 and a TLCI of 95 this RGB LED tube exceeds most studio lighting needs. It also features a choice of over 360 static light colors on the RGB spectrum and can cycle through the entire spectrum at a speed of your choice. With six pre-programmed special effects in a simple-to-use menu system, this NanLite RGB light tube makes it easy to create lighting scenes that can otherwise be difficult to replicate.

At the touch of a button, you can output the red and blue flash of a police car, a flickering flame (candlelight), the flash of a lightning storm, the Flicker of a TV screen, the flicker of a dying light bulb. and an SOS signal. Each of the special effects has many different settings to help you adjust it and create the exact effect you need, as well as a built-in LCD panel showing you exactly what settings you're using, making it easy to fine-tune and then recreate them in the future. With easy-to-use dials and buttons built into the light tube, as well as built-in 2.4GHz radio control and master/slave functions, this RGB tube light is versatile enough to fit right into your existing setup without needing a lot of extra preparation.

Key Features of the Nanlite PavoTube 30C 4ft (120cm) RGBW LED tube - 2KIT

  • Dimming: 0 to 100 % continuous
  • Color Temperature: 2700K-6500K
  • Power Consumption: 32W x 5
  • Power Supply: 15 / 15 VDC at 3 A

Light's master/slave mode

This light's master/slave mode also makes it easy to synchronize multiple lights by chaining them together using the included sync cable to create a powerful bank of lights performing synchronized effects. Perfect for use in the studio or on location, this lightweight tube is available in 2-foot and 4-foot lengths. Both length variants are 4.8 cm in diameter making them T12 compatible. It can be powered using the included AC adapter and also has two built-in 2200mAh batteries for use where no mains power supply is available. Supplied in a padded carrying case complete with all the accessories you need to get going, including mounting clips for adapting your light to a tripod or the wall.

Octagon Ends

The Pavotube has octagonal ends, allowing it to be placed on the floor or a surface at a specific angle to give you maximum control over the throw of the lighting. Both 2-foot and 1.2m variants are available as single lights as well as kits of two lights and four lights.

Studio Quality Lighting

An amazingly versatile studio lighting fixture that featuring 0-100% dimming, a max output of 2850 lumens, adjustable color temperature from 6500-2700K as well as a full spectrum RGB and pre-programmed special lighting effects.

Full Creative Control

Easily achieve beautiful results without adding plastic filters or gels. The PavoTube Tubes' easy-to-use dials and buttons enable you to dial temperature from warm to cold (6500K-2700K) or hue and saturation in RGB mode.

Power Anywhere

Perfect for use in the studio or on location, PavoTube RGB+W Tubes can run off either the included AC adapter or their internal Li-ion batteries for up to 2 hours at full brightness when no mains power is available.

Limitless Possibilities

Simply connect multiple PavoTube RGB+W Tubes together via the included sync cord to build and shape a powerful bank of lights with synchronized adjustments and effects.

  • MPN - NN1520082KIT
  • GTIN - 6949987420453
+ Read more
Power Supply DC15V/4A,100-240V AC
Power Consumption 32W x 5
Color Temperature 2700K-6500K
Dimming 0 to 100 % continuous
CRI/TLCI 98/95
Photometrics / 360°at 2700K 18 fc / 194 lux at 2 m
Photometrics / 6500K 19.4 fc / 209 lux at 2 m
Control Dimming with NNRC1 Remote, Wifi App control with with LGA30 Wifi Router, Synchro control with Pavotube Sync cables
Charge Time Full: 4 Hours, 80%: 3 Hours
Runtime At 10% Brightness: 20 Hours
At 50% Brightness: 4.4 Hours
100% Brightness: 2.2 Hours
Special Effects: Storm, Flash, Candle, Color Cycle
Brightness 2700K LED Bulb:1m-633Lux/59fc; 2m-194Lux/18fc; 3m-101Lux/9fc
6500K LED Bulb:1m-719Lux/67fc; 2m-209Lux/19fc;3m-111Lux/10fc
RED Flat LED:1m-251Lux/23fc; 2m-82Lux/8fc;3m-43Lux/4fc
GREEN Flat LED:1m-663Lux/62fc;2m-210Lux/20fc;3m-109Lux/20fc
BLUE Flat LED:1m-103Lux/10fc;2m-38Lux/6fc;3m-23Lux/2fc
Lumen Output At 2700K: 2700 Lumens
At 3200K: 2700 Lumens
At 5600K: 2850 Lumens
At 6500K: 2850 Lumens
Red: 853 Lumens
Green: 234 Lumens
Blue: 358 Lumens
Dimensions 117 x 48 x 48cm
Weight 1.2kg
Fixture Mount None
Remote Control Type Wi-Fi
Power AC Input Power: 100 to 240 VAC, 50 / 60 Hz
DC Input Power: 15 / 15 VDC at 3 A
Power Source: Integrated Battery
Max Power Consumption: 32 W
+ Read more
Write Your Own Review
You're reviewing:Nanlite PavoTube 30C 4ft (120cm) RGBW LED tube - 2KIT
Your Rating
+ Read more
What’s In The Box
  • Nanlite PavoTube 30C 4ft (120cm) RGBW LED tube - 2KIT
  • Nanlite PavoTube 30C 4' RGBW LED Tube with Internal Battery x2
  • Sync Cord
  • Nanlite Padded Carrying Bag
+ Read more