Manfrotto Fluid Head & MagFibre Tripod with Carrying Bag

Earn 1,319 Qantas Points
$1,319.00
Loading...
Product Overview

  • Manfrotto MVH500AH Fluid Head & 755CX3 Tripod with Carrying Bag
  • Flat Base Fluid Head with 5 kg Payload
  • Wide Platform Ideal for DSLRs
  • -70° / +90° Tilt & 360° Pan
  • Accepts Camera Plates from Above
  • 500PLONG Camera Plate Included
  • 2-Stage Carbon Fiber Tripod
  • Flip-Lever Lock Clamps
  • Adjustable and Removable Center-Column
  • 164 cm Max Height w/ Center-Column Raised
  • Padded, Zippered Over-the-Shoulder Bag
  • Manfrotto MVH500AH Fluid Video Head with Flat Base
  • 5kg Weight Capacity
  • Wide Platform for HDSLRs
  • Side Lock System for Safer Mounting
  • Aluminum Alloy Construction
  • Spring-loaded Counterbalance
  • Includes Long Quick-release Plate
  • 1/4" and 3/8" Camera Attachment
  • Additional 3/8" Accessory Connection
  • Manfrotto 755CX3 MagFiber Video Tripod Legs with Rapid Center Column
  • Supports 7 kg
  • Max. Height: 164 cm
  • Min. Height: 46 cm
  • Folded Length: 63 cm
  • Leg Sections: 3
  • Weight: 1.90 kg
  • MDeVe 50mm Half-Ball Leveling System
  • Up to 15 Degrees of Leveling Capability
  • Independent Leg Angle Selection
+ Read more

The Manfrotto MVH500AH Fluid Head & 755CX3 Tripod with Carrying Bag includes a Manfrotto MVH500AH Fluid Video Head with Flat Base and a Manfrotto 755CX3 MagFiber Video Tripod Legs with Rapid Center Column

The Manfrotto MVH500AH Fluid Head & 755CX3 Tripod with Carrying Bag includes a flat base fluid video head, a flat base 2-stage tripod, and a black and red over-the-shoulder carrying bag. The bag is padded, has a zipper running along its full length, and fits the tripod and head.

The head features a wider than a standard platform to provide better support for DSLRs. The maximum load capacity is 5 kg. A 500PLONG quick release plate is included, and a side lock system on the head allows the plate to efficiently attach and click in from above, instead of aligning and sliding in from one end. Fluid cartridges on both the pan and tilt axes provide resistance for smooth, controlled pan and tilt. The tilt range is -70° / +90° and the pan rotation is 360°. The spring-loaded counterbalance is preset at 2.4 kg. The camera plate has both 1/4" and 3/8" camera screws, and the head has a 3/8" tripod mounting thread and a 3/8" thread on the side for attaching accessories, such as a video monitor.

The tripod extends in two stages from 46.5 to 139 cm at the release of flip-lever lock clamps. Additionally, a centre-column is adjustable up and down to extend the maximum height to 164 cm. The centre-column can also be removed entirely and used handheld with a camera still attached. The tripod legs are made of carbon fibre, which is lightweight in comparison to aluminium, absorbs vibrations better, and is immune to corrosion from water, including salt-water.


Key Features of the Manfrotto MVH500AH Fluid Head & 755CX3 Tripod with Carrying Bag

  • Flat Base Fluid Head with 5 kg Payload
  • Wide Platform Ideal for DSLRs
  • -70° / +90° Tilt & 360° Pan
  • Accepts Camera Plates from Above
  • 500PLONG Camera Plate Included
  • 2-Stage Carbon Fiber Tripod
  • Flip-Lever Lock Clamps
  • Adjustable and Removable Center-Column
  • 164 cm Max Height w/ Center-Column Raised
  • Padded, Zippered Over-the-Shoulder Bag

Flat Base 2-Stage Tripod

  • Extends in two stages from 46.5 to 139 cm
  • Carbon fibre leg tubes
  • Vertically adjustable and completely removable centre-column
  • 164 cm maximum height with the centre-column raised

Over-the-Shoulder Carrying Bag

  • Fits the tripod and head
  • Padded
  • A zipper runs across the full length
  • Red and black

 

Manfrotto MVH500AH Fluid Video Head with Flat Base

The Manfrotto MVH500AH Fluid Video Head with Flat Base is designed with a wide platform, optimal for HDSLR camera bodies. Smooth and precise, it has a maximum weight load of 5 kg and professional quality fluid cartridges on both its pan and tilt axes. It has a pre-set spring-loaded counterbalance of 2 kg, its lateral tilt range is -70°/+90° and it provides 360° panning rotation.

The side lock system on the MVH500AH allows the camera and sliding QR plate to click quickly into the head from above, instead of needing to be aligned and slid in from the back. This makes it easier and safer to mount your camera on this head. The head attaches to a tripod via a 3/8"-16 thread and includes a 500PLONG sliding balance plate with a captive 1/4"-20 tie-down screw and a 3/8"-16 adapter bushing. It also provides an Easy Link 3/8" connector on the side of the head to attach accessories such as a video monitor.

The MVH500AH is made from aluminium alloy, measures 9 cm high and provides a bubble level and precision control handle.


Key Features of the Manfrotto MVH500AH Fluid Video Head with Flat Base

  • Wide platform fluid pan video head ideal for HDSLR cameras
  • 2 kg pre-set spring-loaded counterbalance system
  • Side-lock system for easier and safer camera mounting
  • Aluminium alloy construction
  • Includes long quick-release plate
  • 5 kg maximum weight capacity
 

Manfrotto 755CX3 MagFiber Video Tripod Legs with Rapid Center Column

The Manfrotto 755CX3 MagFibre 2-Stage Tripod s intended for high-definition camcorders weighing up to 7kg. It features carbon fibre composite leg tubes and fast-action stage clamps. There is also a built-in 50mm half-ball levelling system that can be locked via a detachable rotating grip. This facilitates camera platform levelling without adjusting leg length. The rapid centre column adds 25 cm to the maximum height of the cameras platform.


Key Features of the Manfrotto 755CX3 MagFiber Video Tripod Legs with Rapid Center Column

  • Supports 7 kg
  • Max. Height: 164 cm
  • Min. Height: 46 cm
  • Folded Length: 63 cm
  • Leg Sections: 3
  • Weight: 1.90 kg
  • MDeVe 50mm Half-Ball Leveling System
  • Up to 15 Degrees of Leveling Capability
  • Independent Leg Angle Selection

Magnesium Alloy Castings

Lightweight magnesium alloy is used for die-cast parts. Magnesium alloy has a density of 1.74g/cm3 as opposed to aluminium alloy's 2.70g/cm3 - a 35% reduction. Despite its lower weight, magnesium alloy is more rigid than aluminium alloy and has the same strength per volume.

100% Carbon Fiber Tubes

Manfrotto tubes are made of 100% carbon fibre in order to reach high-quality standards and high levels of performance, rigidity and lightness. Manfrotto pull winding technology (to maximize performance, resistance and reliability.

  • Built-in bubble level

  • MPN - 755CX3.MVH500AH
  • GTIN - 8024221613308
+ Read more

MVH500AH Fluid Video Head

Load Capacity 11 lb / 5 kg
Tripod Mounting Thread 3/8"-16
Camera Screw 1/4"-20 and 3/8"-16
Material Aluminum Alloy
Counter Balance System Yes, Counterbalance Range Preset to 5.3 lb / 2.4 kg
Camera Plate 500PLONG Quick Release Plate
Tilt Drag Yes, Fluid Cartridge with Fixed Drag
Tilt Range -70°/+90°
Tilt Lock Yes
Spring Loaded Counter Balance Yes
Pan Lock Yes
Pan Range 360°
Pan Bar One Pan Bar Included
Levelling Bubble / Illuminated Yes / No
Temperature Range -4 to 140°F / -20 to 60°C
Working Height 3.74" / 9.5 cm
Weight 2 lb / 0.90 kg

755CX3 2-Stage Tripod

Load Capacity 15.4 lb / 7 kg
Material Carbon Fiber
Fluid Head Screw 3/8"-16
Minimum Height 18.3" / 46.5 cm
Maximum Height 54.7" / 139 cm
Maximum Height with Column 64.6" / 164 cm
Leg Stages 2
Leg Sections 3
Leg Lock Type Flip-Lever
Center Brace / Mid-Level Spreader No
Spiked / Retractable Feet No
Center Column 1, Sliding
Folded Length 25" / 63.5 cm
Weight 4.25 lb / 1.9 kg
+ Read more
Write Your Own Review
You're reviewing:Manfrotto Fluid Head & MagFibre Tripod with Carrying Bag
Your Rating
+ Read more
What’s In The Box
  • Manfrotto MVH500AH Fluid Head & 755CX3 Tripod with Carrying Bag
  • Manfrotto MVH500AH Fluid Video Head with Flat Base
  • 500PLONG Quick Release Plate
  • Handle
  • Manfrotto 755CX3 MagFiber Video Tripod Legs with Rapid Center Column
  • Red & Black Tripod Carrying Bag
+ Read more