The Aputure LS C120D II is a complete re-design of the original C120D. We’ve taken all of your favorite features of the C120D and have jam packed it with upgrades, improvements and new features.
25% more brightness than its predecessor, DMX control, and a redesigned handbrake-locking yoke, the Light Storm LS C120D II Daylight LED Light from Aputure is a Chip on Board (COB)-powered fixture with a 5500K color temperature that consumes a negligible 180W of power while outputting 135,000 lux (equivalent to a 1000W hot light) at a distance of 2.6m with an optional Fresnel. In addition to power efficiency, the fixture also features a high CRI/TLCI rating of 96/97, an indicator of precise rendering of color.
Ideal for sound-sensitive environments, the LS C120D II is seen but not heard thanks to an intelligent cooling system that employs temperature-sensitive fans to regulate the heat. There's also an Auto/Force button that triggers maximum cooling. In any case, even at maximum power, the fan noise doesn't exceed 18 dB - basically the sound of a person breathing.
The LS C120D II's performance is backed by its design. The all-aluminum construction goes through over a hundred fabrication steps. The reflector and accessory mount is the widely-used Bowens S-type, while the wired controller is separated from the fixture's body, making it lighter and reducing its size. You can make light intensity adjustments locally on the fixture or remotely with an included wireless remote that allows you to control dimming functions from as far away as 0.06 m. Yet another way to turn the light on or off or dim it from 1-100% is via onboard DMX, remotely from a console. The LS C120D II is ready for worldwide use thanks to its controller's 110-240 VAC power supply. You can also use its V-mount battery plate for external battery power when mains power is unavailable. The LS C120D II is delivered as a kit with a reflector, controller, and a dedicated carrying bag to protect the light during travel and storage.
25% Brighter than Predecessor
The LS C120D II boasts a luminance of 135,000 lux at 0.48m away with the optional Aputure Fresnel. With an approximate brightness equivalent to a 1000W tungsten light, the C120D II is nearly 25% brighter than the 1st generation C120D, making it competitive with some of the highest-grade studio lights on the market.
The LS C120 II features a CRI of 96 and a 5500K color temperature. Additionally, its TLCI also has been measured at up to 97. TLCI, or Television Lighting Consistency Index, is the accurate measurement of color fidelity of a light source for broadcast use; a high rating shows that a light source will render colors well in a film or photography context. Therefore, the LS C120D II will display natural color in both photo and video applications.
DMX is the worldwide industry standard for film and television studios, theater, broadcast, and all forms of digital networking systems. The C120D II comes with DMX capability, allowing studios to maximize their range of uses for their lighting arsenal.
Combined Controller-Power Unit
the C120D II is now powered by a single, all-in-one power box. Made of aircraft-grade aluminum but maintaining its lightweight build, a single power unit means less cabling and power components so filmmakers spend less time setting up their light, and more time being creative.
Neutrik Cable Locks
Color-coded Neutrik cable systems allow for more flexibility in where your light can be placed, and advanced locking systems ensure maximum safety, regardless of your set's challenges and environment.
A redesigned yoke construction accommodates an expanded range of motion of over 330°, letting you angle and point your light anywhere you need it. An improved user-friendly hand grip design also makes for highly intuitive controls.
The Brightest or the Dimmest
The LS C120D II has taken the precision controls of the C120D and expanded them further allowing for seamless dimming from 1 to 100%.
Auto/Force: Powerful Temperature Control
The LS C120D II has an intelligent temperature control system. The fan's rotation will be varied based on the correspondent ambient temperature. The fan can also go to maximum of rotation when you engage Auto/Force mode. This complex fan system improves both heat dissipation efficiency, and LED lifespan.
Most lights utilizing a fan system are too loud and not suitable for film or video production, however, the LS C120D II with its built-in electric fan, produces only 18 dB noise, similar to the sound of a person's breathing. That means is negligible fan noise, even at maximum output.
Portable and Lightweight
Portability and light weight are characteristics many photographers and filmmakers can appreciate in equipment and the LS C120D II weighs in at 2.17 kg
Featuring an aircraft-grade aluminum body, the LS C120D II is tough and durable. More than 100 fabrication procedures such as extrusion, cutting, trim, sandblasting, and laser engraving are employed.
Effective Battery Power Solution
The LS C120D II is able to meet various shooting requirements with AC or battery options. The light's V-mount battery plate is an asset for situations where mains power is unavailable.
Wireless Remote Control with 100m Range
Using 2.4 GHz technology, the LS C120D II can power on or off or adjust brightness wirelessly, even at distances up to 100m.
The LS C120D II has the convenience of an integrated handgrip for adjusting the light's direction and for expeditious packing.
- MPN - 25.LS120DMKII-V
- GTIN - N/A
|Dimensions (WxHxD)||Outer Diameter:90 cm
Front Diffusers:8.85 cm
diameter Inner Diffuser:23.5 cm diameter
|Photometrics||Without Reflector: 110 fc / 1183.6 lux at 2 m
With Reflector: fc / 1700.1 lux at 2 m
|Dimming||Yes, 1 to 100%|
|Dimensions||Fixture Dimensions: 300.0 x 193.0 x 124.0 mm|
|Color Accuracy Standard||CRI 96
|Weight||Fixture Weight: 2.2 kg (Including Reflector)|
|Certifications||CE, FCC, RoHS, as per Manufacturer|
|Power Source||AC Adapter, External Battery|
|Power Supply Dimensions||3140 x 119 x 62.6 cm|
|Max Power Consumption||180 W|
|AC Input Power||100 to 240 VAC, 50 / 60 Hz|
|Wireless Channels / Groups||3 / 4|
|Remote Control Type||DMX, Proprietary Wireless|
|Fixture Mount||5/8" Receiver|
|DMX Connector||5-Pin XLR|
|Battery Plate||1 x V-Mount|
|Wireless Range||100 m|