The iFootage Shark Slider S1 Bundle includes the Shark Slider S1 with the flywheel and adds extension rails and a longer drive belt. The standard S1 is 78.7cm long end-to-end and features a 63.5cm sliding length, and with the additional rails the sliding length is increased to 119.4cm. The S1 comes with a padded carrying bag which can fit the additional accessories of this bundle as well. The Shark Slider S1 is a modular slider supporting up to 6.8 kgs loads (4.8 kgs with extension rails) and offering smooth movement thanks to silent bearings, synchronous belts, and a flywheel that adds inertia. The flywheel adds a damping effect to your slides, ensuring smooth acceleration/deceleration as opposed to jerky starts and stops. It achieves this through its centrifugal force while the slider belt is connected to it.
The S1 can be completely taken apart with just one included hex wrench and the different components packed separately, if you want. The end pieces offer adjustable feet that spread out in triangular form to add extra stability. The mounting plate attached on the bottom of the sliding carriage is also designed with stability in mind and is screwed into the carriage at four corners to minimize vibration when the slider is mounted on a tripod. The S1 offer has a 3/8"-16 camera mounting screw, and 1/4"-20 and 3/8"-16 tripod mount threaded holes.
The carbon fiber rails provide for better corrosion resistance than aluminum and also allow for a lighter system. The S1 supports longer rails from iFootage for a total sliding length of 31.8cm. It also supports the S1A1 and S1A3 Wireless Motion Controllers, and the Motion X2 System, which provides 360° camera movement.
|Load Capacity||7 kg|
|Travel Distance||64 cm
120 cm, Including Extension
|Tripod Mounting||1/4"-20 Female Thread
3/8"-16 Female Thread
|Camera Mounting Screw||3/8"-16 Male|
|Track Length||79 cm
135 cm, Including Extension