The Elinchrom D-Lite RX One Flash Head is a 100W/s auto-sensing, multi-voltage monolight that recognizes any AC power source from 90-260VAC, allowing power variability over 5.0 stops in 1/10 stop increments. Recycling is a fast 0.5-2.1 sec. (@115V) with flash durations as short as an action-stopping 1/1,100 sec at full power.
The D-Lite RX One is packed with professional and convenience features usually found in flash heads twice its price. Although this head accepts one, you won't need a PC cord. It has a built-in EL Skyport Receiver with 8 frequency channels that can handle 4 distinct groups of flashes. Separate purchase of the EL Skyport Speed Transmitter not only allows you to trigger your flash at distances up to 393' but gives you control of power on/off, modeling light functions, and Speed Sync activation. Free software for Mac and PC computers is available, providing additional features such as Flash-Delay for strobing effects. Add an optional WiFi module to the transmitter and you can use specially designed apps that allow full remote control from your iPhone, iPad, or iPod Touch.
D-Lite RX One's bayonet mount accepts all Elinchrom accessories and softboxes up to 135 cm. It comes with a power cord with a U.S. plug, sync cord, flash tube, and protective cap. The included 115V 100W modeling lamp must be swapped out when using the unit in nominal 230V electrical environments.
Key Features of the Elinchrom D-Lite RX One Head With Protection Cap
Built-in EL Skyport receiver for triggering
8 Frequency Channels with 4 groups
Speed Sync mode for synchronization up to a 1/320 sec. on enabled SLR cameras
Pre-Flash detector system to enable the use with Speedlights
Power Auto-dump
5V sync socket for maximum protection of digital cameras