Take advantage of big audio in a small footprint with the black Creative Pebble V2 USB Type-C Powered Desktop Speakers. Featuring a two-channel design, the Pebble V2 produces 8W of RMS and 16W of peak power. Bus-powered, this speaker uses a USB Type-C power connection and a 3.5mm audio connection. Both speakers are attached via a hardwired cable. A volume knob and gain switch on the right speaker allow for easy control, and the drivers are angled at 45° for optimum sound. A USB Type-C to USB Type-A adapter is included, allowing you to plug the Pebble V2 into a USB Type-A port.
Note: Product is shown in use for illustration only, additional equipment is not included.
The Pebble V2 features a small footprint and minimalist design intended to naturally fit in offices, homes, workspaces, or gaming setups.
Powered entirely via USB Type-C, with a standard 3.5mm jack for audio, the Pebble V2 provides high-power output without distortion. A 5' cable connects the left and right speakers for easy placement.
The included USB Type-C to USB Type-A adapter allows you to use the Pebble V2 with a USB Type-A port.
When plugged in to a 10W USB Type-C or Type-A port, the built-in gain switch in Pebble V2 activates high-gain mode for amplified audio and provides power of 8W RMS and peak power up to 16W.
Despite its small footprint, the Pebble V2 features built-in 2" full-range drivers and passive radiators.
Sporting 45° elevated drivers, the Pebble V2 is specifically angled for directing audio to your ears.
Available separately, the Creative 30W PD Adapter is a portable adapter that supports Power Delivery 3.0 and Quick Charge 3.0, and features both USB Type-C and Type-A ports. It also comes with interchangeable US, Japan, Europe, and UK AC plugs, and can be used as a wall adapter to power the Pebble V2.
|Amplifier Power Rating||8 W RMS
16 W Peak
|Drivers||1 x 2" / 50.8 mm Full-Range (per Speaker)|
|Passive Radiators||1 (per Speaker)|
|Frequency Response||100 Hz to 17 kHz|
|Wired Connectivity||1 x USB Type-C Input (Bus Power)
1 x 1/8" / 3.5 mm Input (Audio)
|SNR (Signal-to-Noise Ratio)||75 dB|
|DC Input Power||5 VDC at 2 A (USB Bus Power)|
|Cable Length||Speaker to Speaker: 1.35 m (Hard-Wired)
USB: 1.2 m
Audio: 1.2 m (1/8" / 3.5 mm)
|Operating Temperature||0 to 45°C|
|Dimensions||122 x 116 x 115 mm (Each)|
|Weight||0.3 kg (Each)|