{"title":"Tripods \u0026 Monopods","description":null,"products":[{"product_id":"smallrig-dual-magnetic-suction-cup-mounting-support-kit-for-action-cameras-4467","title":"SmallRig Dual Magnetic Suction","description":"\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eSmallRig Dual Magnetic Suction Cup Mounting Support Kit for Action Cameras 4467\u003c\/strong\u003e attaches action cameras to flat, metal surfaces using two durable suction cups with combination magnetic mounts, and on top is an adjustable magic arm. The mount is designed to be used with moving vehicles going less than 74 mph. This is particularly useful for vloggers, reality television productions, and other low-impact applications.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eAction cameras equipped with a standard three-prong mounting platform are fastened to an included adapter, which sports a 1\/4\"-20 threaded receiver. This screws into the dual ball magic arm that is integrated into a bar connecting the suction cups, providing nearly 360° of pan, tilt, and roll. A simple push allows action cameras of up to 12.3 oz to be securely attached to clean, flat surfaces. The integrated magnets provide added security on metal surfaces such as aluminum, iron, or steel.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe mount does not include a safety tether, so a separately available safety tether is highly recommended when using it on vehicles at high speed. It is not for use on glass, carbon fiber, special alloy metal, painted surfaces, marble, textured wallpaper, diatom mud walls, unpainted wood, frosted glass, and other rough or textured surfaces.\u003c\/p\u003e\n\u003cp\u003e   \u003c\/p\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the SmallRig Dual Magnetic Suction Cup Mounting Support Kit for Action Cameras 4467\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e12.3 oz Maximum Load Capacity\u003c\/li\u003e\n\u003cli\u003eDual Magnetic Suction Cups\u003c\/li\u003e\n\u003cli\u003eBuilt-In Dual Ball Head Magic Arm\u003c\/li\u003e\n\u003cli\u003eIncluded Action Camera Mount\u003c\/li\u003e\n\u003cli\u003eFor Metal Surfaces Only\u003c\/li\u003e\n\u003cli\u003eCan Travel up to 74 mph on Vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eUsage Notes\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe package does not include a safety tether, so use a separately available tether when using at high speed. It is recommended to keep the speed below 74mph and check the suction force before use and every hour.\u003c\/li\u003e\n\u003cli\u003eThis product can only be used on flat metal surfaces or other magnetic flat surfaces. To use it on a flat glass surface, it is recommended to purchase SmallRig 3566 and 4193 Suction Cup Mounts.\u003c\/li\u003e\n\u003cli\u003eIt is strictly prohibited to use the Magnetic Suction Cup Mounting Support Kit on the following surfaces: glass (e.g. car windows, front windshields, etc.), carbon fiber, special alloy metal, painted surfaces,  marble, textured wallpaper, diatom mud walls, unpainted wood, frosted glass, and other rough or textured surfaces.\u003c\/li\u003e\n\u003cli\u003eDo not use in the following scenarios: surfing, skiing, or other high-impact sports.\u003c\/li\u003e\n\u003cli\u003eDo not use in the following environments: prolonged contact with water or rain.\u003c\/li\u003e\n\u003cli\u003eDo not use it with a mobile phone clamp for dynamic photography.\u003c\/li\u003e\n\u003cli\u003eDo not use it with a selfie stick for dynamic photography.\u003c\/li\u003e\n\u003cli\u003eSafe usage temperature range: -4 to 140°F.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - 4467\u003c\/li\u003e\n\u003cli\u003eGTIN - 6941590015330\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SMALLRIG","offers":[{"title":"Default Title","offer_id":46838936207545,"sku":"162255","price":83.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/smallrig_dual_magnetic_suction_cup_mounting_support_kit_for_action_cameras_4467.jpg?v=1775373429"},{"product_id":"smallrig-hawklock-h21-universal-quick-release-mount-plate-kit","title":"SmallRig HawkLock H21","description":"\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eSmallRig HawkLock H21 Universal 1\/4\"-20 Quick Release Mount Plate Kit\u003c\/strong\u003e is a compact aluminium baseplate and quick-release plate with a 1\/4\"-20 anti-twist screw. This system features a HawkLock quick-release design with a button release that is ideal for quickly mounting and unmounting a monitor, LED light, mic, or other small camera accessory featuring a male shoe adapter.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe base features a 1\/4\"-20 thread with anti-twist divots for mounting onto a cage or rig. The SmallRig HawkLock system features rollers and a safety pin, which provide easy on\/off mounting using the HawkLock-style notches. The set features a load capacity of 5 kg.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the SmallRig HawkLock H21 Universal Quick Release Mount Plate Kit\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eQuickly Mount\/Unmount a Small Accessory\u003c\/li\u003e\n\u003cli\u003eQuick Release Plate with 1\/4\"-20 Screw\u003c\/li\u003e\n\u003cli\u003eBase with 1\/4\"-20 Anti-Twist Thread\u003c\/li\u003e\n\u003cli\u003e5 kg Load Capacity\u003c\/li\u003e\n\u003cli\u003eNonslip HawkLock Rollers, Button Release\u003c\/li\u003e\n\u003cli\u003eDurable Aluminum Construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - 4491\u003c\/li\u003e\n\u003cli\u003eGTIN - 6941590015514\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SMALLRIG","offers":[{"title":"Default Title","offer_id":46838948430009,"sku":"162266","price":33.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/smallrig_hawklock_h21_universal_quick_release_mount_plate_kit_01.jpg?v=1775373605"},{"product_id":"smallrig-hawklock-h38-arca-swiss-quick-release-mount-plate","title":"SmallRig HawkLock H38 Arca-Swiss Quick Release Mount Plate","description":"\u003cp class=\"mText\"\u003eMount a camera on a tripod, cage, or rig with this \u003cstrong class=\"h1Lit\"\u003eSmallRig Hawklock H38 Arca-Type Base with Quick Release Plate.\u003c\/strong\u003e This set includes a HawkLock-style Arca-type baseplate and a quick-release camera mounting plate secured by a clamp lever.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe plate features two 1\/4\"-20 camera mounting screws with soft padding to prevent twisting. The base features two 1\/4\"-20 mounting threads on the bottom for mounting onto a cage or rig with 1\/4\"-20 screws, and the receiver features the HawkLock anti-slip, notched design to prevent unwanted sliding. Two Allen wrenches are included to tighten the screws.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the SmallRig HawkLock H38 Arca-Swiss Quick Release Mount Plate\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArca-Type Base and QR Plate Set\u003c\/li\u003e\n\u003cli\u003eBase 1\/4\"-20 Threads\u003c\/li\u003e\n\u003cli\u003eDual Anti-Twist 1\/4\"-20 Screw Mount\u003c\/li\u003e\n\u003cli\u003eCompatible with Most Arca-Type Plates\u003c\/li\u003e\n\u003cli\u003eMount on Cage, Tripod, Shoulder Mount\u003c\/li\u003e\n\u003cli\u003eQuick Release Locking Lever\u003c\/li\u003e\n\u003cli\u003eHawkLock Anti-Slip Receiver Design\u003c\/li\u003e\n\u003cli\u003ePads to Protect and Secure Camera\u003c\/li\u003e\n\u003cli\u003eDurable Aluminum Construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - 4486\u003c\/li\u003e\n\u003cli\u003eGTIN - 6941590015507\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Small Rig","offers":[{"title":"Default Title","offer_id":46838948462777,"sku":"162261","price":50.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/smallrig_hawklock_h38_arca-swiss_quick_release_mount_plate_03.jpg?v=1775373607"},{"product_id":"smallrig-horizontal-to-vertical-mount-plate-kit-for-sony-alpha-7c-ii","title":"SmallRig Horizontal-to-Vertical Mount Plate Kit for Sony Alpha 7C II","description":"\u003cp class=\"mText\"\u003eUse this \u003cstrong class=\"h1Lit\"\u003eSmallRig Horizontal-to-Vertical Mount Plate Kit for Sony Alpha 7C II\u003c\/strong\u003e to efficiently transition your Sony a7C II or a7CR camera from horizontal to vertical filming orientations. The kit includes the main horizontal-to-vertical mount plate compatible with lens adapter rings 63mm and less and a bottom mount plate that secures via a 1\/4\"-20 screw and maintains access to the camera's buttons and ports. Unlock the integrated knob to turn the camera 90°. The entire kit can be mounted on tripods or gimbals of your choice using the Arca-type plate, multiple 1\/4\"-20 threads, and a 3\/8\"-16 thread.\u003c\/p\u003e\n\u003cp\u003e     \u003c\/p\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the SmallRig Horizontal-to-Vertical Mount Plate Kit for Sony Alpha 7C II\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFor Sony a7C II and a7CR\u003c\/li\u003e\n\u003cli\u003eBottom Mount Plate\u003c\/li\u003e\n\u003cli\u003eRotates 90°, 1\/4\"-20 Mounting Screw\u003c\/li\u003e\n\u003cli\u003eMultiple 1\/4\"-20 Threads, 3\/8\"-16 Thread\u003c\/li\u003e\n\u003cli\u003eArca-Type Plate, Manfrotto Compatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - 4570\u003c\/li\u003e\n\u003cli\u003eGTIN - 6941590015811\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Small Rig","offers":[{"title":"Default Title","offer_id":46838950887609,"sku":"162285","price":141.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/1715248819_1825276.jpg?v=1775373668"},{"product_id":"smallrig-lightweight-video-carbon-fiber-tripod-kit-ad-50-4685","title":"SmallRig Lightweight Video Carbon Fiber Tripod Kit AD-50 4685","description":"\u003cp class=\"mText\"\u003eDesigned for run-and-gun videographers with lightweight camera rigs, the \u003cstrong class=\"h1Lit\"\u003eSmallRig Lightweight Video Carbon Fiber Tripod Kit AD-50 4685\u003c\/strong\u003e includes carbon fiber tripod legs and a video head for a durable and portable tripod support system. Altogether, the system has a 13.2 lb load capacity suited for smaller camera builds. The tripod features three leg sections with a height adjustment range of 28.7 to 64.1\". It folds down to 31.1\" for simplified transport in the included carrying case.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eA center quick-lift rope design allows you to reduce the space taken up by the tripod for shooting in tight areas. The video head has a Manfrotto-style quick release plate with integrated mounting screws. Fixed damping and counterbalance systems feature incremental pan and stepless tilt adjustment for smooth movements. A 1\/4\"-20 accessory thread allows you to integrate an articulating arm, secondary monitor, or image transmitter.\u003c\/p\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the SmallRig Lightweight Video Carbon Fiber Tripod Kit AD-50 4685\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Fiber Tripod and Video Head\u003c\/li\u003e\n\u003cli\u003e13.2 lb Load Capacity\u003c\/li\u003e\n\u003cli\u003e28.7 to 64.1\" Height Adjustment Range\u003c\/li\u003e\n\u003cli\u003eManfrotto-Style Quick Release Plate\u003c\/li\u003e\n\u003cli\u003e1\/4\"-20 Accessory Thread\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - 4685\u003c\/li\u003e\n\u003cli\u003eGTIN - 6941590017341\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Small Rig","offers":[{"title":"Default Title","offer_id":46838955409593,"sku":"162308","price":282.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/162308.jpg?v=1775373804"},{"product_id":"smallrig-lightweight-video-tripod-kit-ad-50-lite-4684","title":"SmallRig Lightweight Video Tripod Kit AD-50 Lite 4684","description":"\u003cp class=\"mText\"\u003eDesigned for run-and-gun videographers with lightweight camera rigs, the \u003cstrong class=\"h1Lit\"\u003eSmallRig Lightweight Video Tripod Kit AD-50 Lite 4684 \u003c\/strong\u003eincludes aluminum alloy tripod legs and a video head for a durable and portable tripod support system. Altogether, the system has an 13.2 lb load capacity suited for smaller camera builds. The tripod features three leg sections with a height adjustment range of 29.5 to 62.2\". It folds down to 31.1\" for simplified transport in the included carrying case.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eA center quick-lift rope design allows you to reduce the space taken up by the tripod for shooting in tight areas. The video head has a Manfrotto-style quick release plate with integrated mounting screws. Fixed damping and counterbalance systems ensure smooth pan and tilt movements. A 1\/4\"-20 accessory thread allows you to integrate an articulating arm, secondary monitor, or image transmitter.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003e     \u003c\/p\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the SmallRig Lightweight Video Tripod Kit AD-50 Lite 4684\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAluminum Alloy Tripod and Video Head\u003c\/li\u003e\n\u003cli\u003e13.2 lb Load Capacity\u003c\/li\u003e\n\u003cli\u003e29.5 to 62.2\" Height Adjustment Range\u003c\/li\u003e\n\u003cli\u003eManfrotto-Style Quick Release Plate\u003c\/li\u003e\n\u003cli\u003e1\/4\"-20 Accessory Thread\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"mText\"\u003e \u003c\/p\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - 4684\u003c\/li\u003e\n\u003cli\u003eGTIN - 6941590017334\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Small Rig","offers":[{"title":"Default Title","offer_id":46838955475129,"sku":"162307","price":166.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/1719791144_1833780_1.jpg?v=1775373806"},{"product_id":"smallrig-magic-arm-magnetic-suction-cup-mounting-support-kit-for-action-cameras","title":"SmallRig Magic Arm Magnetic","description":"\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eSmallRig Magic Arm \u0026amp; Magnetic Suction Cup Mounting Support Kit\u003c\/strong\u003e attaches action cameras to flat, metal surfaces using a durable magnetic suction cup, and on top is an adjustable magic arm. The mount is designed to be used with moving vehicles going less than 74 mph. This is particularly useful for vloggers, reality television productions, and other low-impact applications.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eAction cameras equipped with a standard three-prong mounting platform are fastened to an included adapter, which sports a 1\/4\"-20 threaded receiver. This screws into the dual ball magic arm that is integrated into a bar connecting the suction cups, providing nearly 360° of pan, tilt, and roll. A simple push allows action cameras of up to 0.76 kg to be securely attached to clean, flat surfaces. The integrated magnets provide added security on metal surfaces such as aluminium, iron, or steel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003cem\u003e The mount does not include a safety tether, so a separately available safety tether is highly recommended when using it on vehicles at high speed. It is not used on glass, carbon fibre, special alloy metal, painted surfaces, marble, textured wallpaper, diatom mud walls, unpainted wood, frosted glass, or other rough or textured surfaces.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the SmallRig Magic Arm Magnetic Suction Cup Mounting Support Kit for Action Cameras\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e0.76 kg Max Load Capacity\u003c\/li\u003e\n\u003cli\u003eDouble-Layer Magnet-Suction Cup\u003c\/li\u003e\n\u003cli\u003eBuilt-In Dual Ball Head Magic Arm\u003c\/li\u003e\n\u003cli\u003eIncluded Action Camera Mount\u003c\/li\u003e\n\u003cli\u003eFor Metal Surfaces Only\u003c\/li\u003e\n\u003cli\u003eCan Travel up to 74 mph on Vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eUsage Notes\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe package does not include a safety tether, so use a separately available tether when using at high speed. It is recommended to keep the speed below 74mph and check the suction force before use and every hour.\u003c\/li\u003e\n\u003cli\u003eThis product can only be used on flat metal surfaces or other magnetic flat surfaces. To use it on a flat glass surface, it is recommended to purchase SmallRig 3566 and 4193 Suction Cup Mounts.\u003c\/li\u003e\n\u003cli\u003eIt is strictly prohibited to use the Magnetic Suction Cup Mounting Support Kit on the following surfaces: glass (e.g. car windows, front windshields, etc.), carbon fibre, special alloy metal, painted surfaces,  marble, textured wallpaper, diatom mud walls, unpainted wood, frosted glass, and other rough or textured surfaces.\u003c\/li\u003e\n\u003cli\u003eDo not use in the following scenarios: surfing, skiing, or other high-impact sports.\u003c\/li\u003e\n\u003cli\u003eDo not use in prolonged contact with water or rain in the following environments.\u003c\/li\u003e\n\u003cli\u003eDo not use it with a mobile phone clamp for dynamic photography.\u003c\/li\u003e\n\u003cli\u003eDo not use it with a selfie stick for dynamic photography.\u003c\/li\u003e\n\u003cli\u003eSafe usage temperature range: -20 to 60°C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - 4466\u003c\/li\u003e\n\u003cli\u003eGTIN - 6941590015323\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SMALLRIG","offers":[{"title":"Default Title","offer_id":46838956425401,"sku":"162254","price":50.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/smallrig_magic_arm_magnetic_suction_cup_mounting_support_kit_for_action_cameras_01.jpg?v=1775373831"},{"product_id":"smallrig-magic-arm-with-crab-shaped-clamp-5312","title":"SmallRig Magic Arm with","description":"\u003cp class=\"mText\"\u003eMount an accessory onto a surface, rod, or pipe with this \u003cstrong class=\"h1Lit\"\u003eSmallRig Magic Arm with Crab-Shaped Clamp 5312\u003c\/strong\u003e. This mount features a crab-style clamp and a long articulating magic arm with dual ball heads and a center rosette joint. The durable aluminum and stainless steel clamp can support an accessory such as a light, monitor, or wireless gear weighing up to 3.3 lb.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe magic arm features ball heads on either end, and a 1\/4\"-20 anti-twist mount on one end connects to an accessory. The clamp can fit around a surface, rod, pipe, stand, or stick with a thickness or diameter up to 2\", and it secures using a large thumb lever. The inside of the clamp is lined with silicone for a solid grip.\u003c\/p\u003e\n\u003ch2\u003eKey Features of the SmallRig Magic Arm with Crab-Shaped Clamp 5312\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLong Magic Arm with Rosette Joint\u003c\/li\u003e\n\u003cli\u003eClamps on Surface\/Rod up to 2\" Thick\u003c\/li\u003e\n\u003cli\u003eDual Ball Heads with 1\/4\"-20 Screw Mount\u003c\/li\u003e\n\u003cli\u003e3.3 lb Load Capacity, Silicone Padding\u003c\/li\u003e\n\u003cli\u003eLarge Thumb-Lever Fastener\u003c\/li\u003e\n\u003cli\u003eAluminum \u0026amp; Stainless Steel Construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - 5312\u003c\/li\u003e\n\u003cli\u003eGTIN - 6941590023571\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SMALLRIG","offers":[{"title":"Default Title","offer_id":46838956720313,"sku":"170237","price":64.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/smallrig_magic_arm_with_crab-shaped_clamp_5312.jpg?v=1775373839"},{"product_id":"smallrig-metal-tabletop-tripod-with-arca-swiss-quick-release-plate-and-panoramic-ball-head","title":"SmallRig Metal Tabletop Tripod with Arca-Swiss Quick Release Plate and Panoramic Ball Head","description":"\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eSmallRig Metal Tabletop Tripod with Arca-Swiss Quick Release Plate and Panoramic Ball Head\u003c\/strong\u003e is designed for DSLR\/mirrorless cameras, smartphones, action cameras, and accessories, and it can also be used as a grip for handheld shooting. The head supports 360° panoramic rotation and can be used in small spaces or on a desktop. The legs alone feature a 44.1 lb load capacity, while the ball head can support loads up to 11 lb.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe head provides -90°\/+45° front-to-back tilt, and -50°\/+50° lateral tilt for multi-angle adjustments. The tripod's feet ensure a stable and slip-free foundation with silicone pads, and the tripod comes with an Arca-type plate so you can quickly mount and dismount your device. The plate and the tripod legs feature a 1\/4\"-20 screw mount on top.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003e     \u003c\/p\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the SmallRig Metal Tabletop Tripod with Arca-Swiss Quick Release Plate and Panoramic Ball Head\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSupports compact DSLR\/mirrorless cameras, smartphones, action cameras, accessories\u003c\/li\u003e\n\u003cli\u003e360° panoramic head with accurate calibration and independent pan knob for panoramic photography\u003c\/li\u003e\n\u003cli\u003eBall head with knob enables multi-angle adjustments\u003c\/li\u003e\n\u003cli\u003eQuickly switches between vertical and horizontal shooting\u003c\/li\u003e\n\u003cli\u003e11 lb load capacity with ball head\u003c\/li\u003e\n\u003cli\u003e44.1 lb load capacity when head is removed\u003c\/li\u003e\n\u003cli\u003eDurable aluminum construction\u003c\/li\u003e\n\u003cli\u003eSilicone padding on tripod feet\u003c\/li\u003e\n\u003cli\u003eArca-type quick release plate with 1\/4\"-20 screw\u003c\/li\u003e\n\u003cli\u003eTripod features 1\/4\"-20 screw on top\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"mText\"\u003e \u003c\/p\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - 4630\u003c\/li\u003e\n\u003cli\u003eGTIN - 6941590017501\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Small Rig","offers":[{"title":"Default Title","offer_id":46838958883001,"sku":"162302","price":67.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/1722336385_1841303.jpg?v=1775373885"},{"product_id":"smallrig-mini-quick-release-tripod","title":"SmallRig mini Quick-Release Tripod","description":"\u003cp class=\"mText\"\u003eThe aluminium \u003cstrong class=\"h1Lit\"\u003eSmallRig Mini Quick Release Tripod\u003c\/strong\u003e is designed for DSLRs, mirrorless cameras, smartphones, handheld gimbal stabilisers, action cameras, and accessories. It also folds down for use as a grip for handheld operation. There's a 1\/4\"-20 mounting screw on top, and soft silicone padding prevents twisting and scratching.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the SmallRig mini Quick-Release Tripod\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUltracompact Mini Tripod\u003c\/li\u003e\n\u003cli\u003e1\/4\"-20 Camera Mounting Thread\u003c\/li\u003e\n\u003cli\u003eSilicone Pad on Screw Mount\u003c\/li\u003e\n\u003cli\u003eQuick-Folding Legs, Can Use as Handgrip\u003c\/li\u003e\n\u003cli\u003eDurable Aluminum Construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - 4117\u003c\/li\u003e\n\u003cli\u003eGTIN - 6941590014548\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Small Rig","offers":[{"title":"Default Title","offer_id":46838960128185,"sku":"162235","price":43.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/smallrig_mini_quick-release_tripod_03_1.jpg?v=1775373898"},{"product_id":"smallrig-nato-clamp-to-arca-swiss-quick-release-plate","title":"SmallRig NATO Clamp to","description":"\u003cp class=\"mText\"\u003eMake it easy to capture vertical video for social media applications using this \u003cstrong class=\"h1Lit\"\u003eSmallRig NATO Clamp to Arca-Type Quick Release Plate.\u003c\/strong\u003e The plate is designed to be mounted onto the side of your camera cage to facilitate vertical shooting mode. On one side, a locking NATO clamp mounts onto a separately available NATO rail or a built-in rail on your cage, and on the other side is an Arca-type quick-release plate that provides fast mounting onto an Arca-type clamp or tripod head.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eMultiple 1\/4\"-20 threads on the plate's underside provide you with the ability to mount onto other plates, such as Manfrotto or dovetail plates, for wider compatibility. It is also compatible with the Arca-type mounts on DJI handheld gimbal stabilizers, such as the DJI RS 2, RSC 2, RS 3, RS 3 Mini, and RS 3 Pro.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the SmallRig NATO Clamp to Arca-Swiss Quick Release Plate\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFacilitate Vertical Shooting\u003c\/li\u003e\n\u003cli\u003eLocking NATO Clamp on Top\u003c\/li\u003e\n\u003cli\u003eArca-Type Quick Release Plate on the Bottom\u003c\/li\u003e\n\u003cli\u003eClamps onto Side NATO Rail on Cage\u003c\/li\u003e\n\u003cli\u003e1\/4\"-20 Threads on Arca-Type Plate\u003c\/li\u003e\n\u003cli\u003eAluminum \u0026amp; Stainless Steel Construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - MD4857\u003c\/li\u003e\n\u003cli\u003eGTIN - 6941590017792\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SMALLRIG","offers":[{"title":"Default Title","offer_id":46838971105465,"sku":"162338","price":32.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/md4857_01.jpg?v=1775373985"},{"product_id":"smallrig-professional-fluid-head-tripod-kit-4465","title":"SmallRig Professional Fluid Head Tripod Kit 4465","description":"\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eSmallRig Professional Fluid Head Tripod Kit 4465 \u003c\/strong\u003eis a durable and portable video tripod system for professional photographers, videographers, and vloggers. The system includes the PH8 professional tripod fluid head and heavy-duty carbon fiber tripod legs. A carry bag is included to store and transport the entire system.\u003c\/p\u003e \u003cp class=\"mText\"\u003eThe durable fluid head features a Manfrotto 501PL-type quick release plate with a snap-in plate design, a 75mm half ball base that can support up to 17.6 lb, 6-step counterbalance, 4-step pan\/tilt drag settings, 360° panning, and +90\/-60° tilting. A telescoping pan handle extends from 13.8 to 20.9\" in length, and it can rotate 360° on the right or left rosette.\u003c\/p\u003e \u003cp class=\"mText\"\u003eThe carbon fiber legs feature removable spiked feet, a mid-level spreader, and a ground spreader for added stability options. It allows you to extend your camera rig from 22.8 to 77.2\" in height. It folds down to 38\" in length for transport.\u003c\/p\u003e \u003cp class=\"mText\"\u003e      \u003c\/p\u003e \u003ch2 class=\"h2Lit\"\u003eKey Features of the SmallRig Professional Fluid Head Tripod Kit 4465\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eLightweight professional tripod system\u003c\/li\u003e \u003cli\u003ePH8 professional fluid head\u003c\/li\u003e \u003cli\u003eCarbon fiber tripod legs\u003c\/li\u003e \u003cli\u003eManfrotto-style quick release plate with snap-in style design\u003c\/li\u003e \u003cli\u003e75mm half ball base\u003c\/li\u003e \u003cli\u003e360° panning, +90\/-60° tilting\u003c\/li\u003e \u003cli\u003e6-step fluid counterbalance\u003c\/li\u003e \u003cli\u003e4-step pan and tilt fluid drag\/damping\u003c\/li\u003e \u003cli\u003eTelescoping pan handle with rosettes on left and right sides\u003c\/li\u003e \u003cli\u003e22.8 to 77.2\" height range\u003c\/li\u003e \u003cli\u003eRemovable mid-level and ground spreaders\u003c\/li\u003e \u003cli\u003eInterchangeable flat wide and spiked feet\u003c\/li\u003e \u003cli\u003e38\" folded length\u003c\/li\u003e \u003c\/ul\u003e \u003cp class=\"mText\"\u003e \u003c\/p\u003e \u003cul class=\"mpn\"\u003e \u003cli\u003eMPN - 4465\u003c\/li\u003e \u003cli\u003eGTIN - TBA\u003c\/li\u003e \u003c\/ul\u003e","brand":"Small Rig","offers":[{"title":"Default Title","offer_id":46838978642105,"sku":"156811","price":1503.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/1710114314_1797157.jpg?v=1775374098"},{"product_id":"smallrig-professional-fluid-head-ph8","title":"SmallRig Professional Fluid","description":"\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eSmallRig PH8 Professional Fluid Head\u003c\/strong\u003e is a durable and portable video tripod head option for professional photographers, videographers, and vloggers. The fluid head allows you to utilize the included Manfrotto 501PL-type quick-release plate, and it features an updated snap-in plate design rather than a sliding plate for added stability. This compact professional head weighs only 1.8 kg.\u003c\/p\u003e \u003cp class=\"mText\"\u003eThe durable head features a 75mm half-ball base that can support up to 8 kg, features a 6-step counterbalance, has 4-step pan\/tilt drag settings, can pan 360°, and can tilt +90\/-60°. A telescoping pan handle extends from 35 to 53 cm in length, and it can rotate 360° on the right or left rosette.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003ch2 class=\"h2Lit\"\u003eKey Features of the SmallRig Professional Fluid Head PH8\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eLightweight professional aluminium video fluid head\u003c\/li\u003e \u003cli\u003eManfrotto-style quick-release plate with snap-in style design\u003c\/li\u003e \u003cli\u003e75mm half-ball base\u003c\/li\u003e \u003cli\u003e360° panning, +90\/-60° tilting\u003c\/li\u003e \u003cli\u003e6-step fluid counterbalance\u003c\/li\u003e \u003cli\u003e4-step pan and tilt fluid drag\/damping\u003c\/li\u003e \u003cli\u003eTelescoping panhandle with rosettes on left and right sides\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e \u003cul class=\"mpn\"\u003e \u003cli\u003eMPN - 4287\u003c\/li\u003e \u003cli\u003eGTIN - TBA\u003c\/li\u003e \u003c\/ul\u003e","brand":"SMALLRIG","offers":[{"title":"Default Title","offer_id":46838978838713,"sku":"156810","price":939.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/156810-new-token.jpg?v=1775374104"},{"product_id":"smallrig-triple-magnetic-suction-cup-mounting-support-kit-for-action-cameras-4468","title":"SmallRig Triple Magnetic Suction Cup Mounting Support Kit for Action Cameras 4468","description":"\u003cp class=\"mText\"\u003eAttach your action camera to a vehicle for driving shots using this \u003cstrong class=\"h1Lit\"\u003eSmallRig Triple Magnetic Suction Cup Mounting Support Kit for Action Cameras 4468.\u003c\/strong\u003e The set includes three silicone suction cups with magnetic pull to improve the mount's staying power. Secure your action camera to the mount using the ball head with 1\/4\"-20 screw. A 3-prong mount adapter expands compatibility to a wider range of cameras. Rubber and silicone dual shock absorber design reduces shakes for improved picture stability.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the SmallRig Triple Magnetic Suction Cup Mounting Support Kit for Action Cameras 4468\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSuction Cups with Magnetic Pull\u003c\/li\u003e\n\u003cli\u003eBall Head with 1\/4\"-20 Screw\u003c\/li\u003e\n\u003cli\u003e3-Prong Mount Adapter\u003c\/li\u003e\n\u003cli\u003e12 oz Load Capacity\u003c\/li\u003e\n\u003cli\u003eShock Absorption Reduces Shakes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - 4468\u003c\/li\u003e\n\u003cli\u003eGTIN - 6941590015347\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Small Rig","offers":[{"title":"Default Title","offer_id":46838990405817,"sku":"162256","price":100.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/smallrig_triple_magnetic_suction_cup_mounting_support_kit_for_action_cameras_4468.jpg?v=1775374467"},{"product_id":"smallrig-windproof-live-broadcast-stabilizer-stand-encore-pt60","title":"SmallRig Windproof Live Broadcast Stabilizer Stand Encore PT60","description":"\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eSmallRig Encore PT60 Stabilizer Stand\u003c\/strong\u003e features a unique ground nail design that provides stability for outdoor shooting on rugged terrain, while its extended four-corner support helps ensure stability on urban surfaces and enhances grip comfort. It accommodates smartphones ranging from 6.6 cm to 9.65 cm wide and weighing up to 0.045 kg. The head pans 360°, while the arm tilts up to 270°. The tripod itself has six central column segments that can be collapsed to 33.5 cm and expanded to 185 cm for greater freedom while shooting. Also available is a 1\/4\"-20 male thread, allowing users to accessorize with lights, mics, and other compatible accessories. An included Bluetooth remote control has an operating distance of up to 10 m.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the SmallRig Windproof Live Broadcast Stabilizer Stand Encore PT60\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFits Phones 6.6 to 9.65 cm Wide\u003c\/li\u003e\n\u003cli\u003eSupports Phones up to 0.045 kg\u003c\/li\u003e\n\u003cli\u003eTripod Height Extends from 33..5 to 185 cm\u003c\/li\u003e\n\u003cli\u003e1\/4\"-20 Male Thread\u003c\/li\u003e\n\u003cli\u003e270° Arm Tilt\u003c\/li\u003e\n\u003cli\u003e360° Head Pan\u003c\/li\u003e\n\u003cli\u003eFoldable Clamp\u003c\/li\u003e\n\u003cli\u003eSix Central Column Segments\u003c\/li\u003e\n\u003cli\u003eIncludes Bluetooth Remote Control\u003c\/li\u003e\n\u003cli\u003eUp to 10 m Bluetooth Operating Distance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"gText\"\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eWindproof Stability\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eIts design includes hidden steel stakes for windproof performance on various outdoor surfaces like grass and sand, helping to ensure enhanced stability\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eSingle-Axis Stabization\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eA rotatable handle control is included for added convenience during use and may be detached from the stand.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eRemote Control Convenience\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eA remote control is included for added convenience during use and may be detached from the stand.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eTelescopic Pole\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe aluminium alloy pole extends up to 2.76 m for a versatile working height\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eErgonomic Grip\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eA square-shaped design offers an ergonomic grip for comfortable handling\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - 4668\u003c\/li\u003e\n\u003cli\u003eGTIN - 6941590016627\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Small Rig","offers":[{"title":"Default Title","offer_id":46838996304057,"sku":"162304","price":50.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/4668_01.jpg?v=1775374642"},{"product_id":"manfrotto-super-professional-tripod-mk2","title":"Manfrotto Super Professional Tripod Mk2","description":"\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eManfrotto 161MK2B Tripod \u003c\/strong\u003e has high load capacity and it is very stable and sturdy for the most demanding assignments\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe Manfrotto MF 161 MK2B Super Pro Tripod is the tallest tripod in the range. The MF-161MK2B is capable of providing a stable platform for cameras up to 20kg at a maximum height of 2.67m! (On the other hand, this giant is also capable of a minimum height of 44cm!). The geared centre column of the MF-161 MK2B is self-locking.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe legs are braced using telescopic struts for maximum rigidity and the ability to have individually adjustable and lockable angles. Rubber feet with retractable spiked feet and level are standard equipment. The Manfrotto MF161MK2B is ideal for all large format cameras. Diameter legs in mm: 40,35,30.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Manfrotto 161MK2B Tripod\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe built-in mid-level spreader adds anti-torsional rigidity and stops the tripod legs from accidentally being knocked wider apart. Compared to a ground-level spreader or dolly, the mid-level spreader has the advantage that it stays well out of the mud and dirt and is more suitable for use on uneven terrain.\u003c\/li\u003e\n\u003cli\u003eThe geared centre column allows for safe and precise height adjustments.\u003c\/li\u003e\n\u003cli\u003eThe three set screws in the camera platform can be used to permanently secure the head to the tripod, providing additional security.\u003c\/li\u003e\n\u003cli\u003eThe twist locks are slightly slower to use than the more common \"Quick Action\" flip lever leg locks, but give total control over locking force. In addition, they are much easier to service out in the field.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - 161MK2B\u003c\/li\u003e\n\u003cli\u003eGTIN - 8024221045710\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstyle\u003e\u003c!--\n        h2.h2Lit {padding-block-start: 0.6rem;margin-block-end: 0.5rem;}\n        .gText h2, .gText3 h2, .gText4 h2, .gText5 h2 {line-height:0.7;}\n        h2.lh1 {line-height: 1;}\n        h3.uLit {padding-top: 1rem; margin-bottom: -0.2rem;}\n        span.h2Lit, .h1Lit {color: #FF6600\n; font-weight: bold;}\n        .h1Lit {font-size: large;}\n        span.h2Lit, p.mText, blockquote.descQ {font-size: medium;}\n        blockquote.descQ footer {font-size: small; }\n        blockquote.descQ {background-color: rgb(237, 237, 237); padding: 0.5rem; width: 80%;}\n        blockquote.descQ p{padding: 0.5rem 0.5rem 0 0.5rem;}\n        Ul.mpn {color: #888888\n;}\n        span.ind{padding-left: 1rem;}\n        table.descTable tr {vertical-align: top;}\n        table.descTable th, table.descTable td {width: 50%; text-align: left; padding: 0 1rem 0 1rem;}\n        table.descTable th {padding-top:1.5rem;}\n        table.bTable {width: auto;}\n        table.bTable th {text-align: left; padding-top:1rem; padding-bottom: 1rem; width: auto; font-size: 1vw;}\n            .bDs {padding:0.5rem; box-shadow: 0rem 0.2rem 0.5rem  rgba(0,0,0,0.6); border-radius:0.5rem; border}\n            @media only screen and (min-width:200px) and (max-width:1000px) {\n                table.bTable th {font-size:3vw;}\n            }\n        .gText div, .gText3 div, .gText4 div, .gText5 div {padding:1rem;}\n        .gText {display:grid; grid-template-columns: repeat(auto-fill,minmax(50%, 1fr));}\n        .gText3 {display:grid; grid-template-columns: repeat(auto-fill,minmax(33.33%, 1fr));}\n        .gText4 {display:grid; grid-template-columns: repeat(auto-fill,minmax(25%, 1fr));}\n        .gText5 {display:grid; grid-template-columns: repeat(auto-fill,minmax(20%, 1fr));}\n                @media only screen and (min-width:200px) and (max-width:1000px) {\n                        .gText, .gText3, .gText4, .gText5 {display:grid; grid-template-columns: repeat(auto-fill,minmax(100%, 1fr));}\n            }\n        .bDs1 {width:fit-content; box-shadow: 0rem 0.2rem 0.5rem  rgba(0,0,0,0.6); border-radius:0.5rem; border}\n        .iDs1 {padding: 0.7rem;}\n        .l1div {border-bottom: 0.1rem solid #000;}\n        .dBor {padding:1rem;border:0.1rem solid #000;}\n            .dMobile {border-top: solid .3rem #000; border-radius: 1rem; box-shadow: #000 0.1rem 0.1rem 0.3rem;}\n            .dMobi {padding-left: 1rem; padding-right: 1rem;}\n            u.h1Lit {font-size: large;}\n        .aquaList li {padding-top: 0.5rem;}\n        .aquaList li::first-line {font-weight: bolder;}\n    --\u003e\u003c\/style\u003e","brand":"Manfrotto","offers":[{"title":"Default Title","offer_id":47110851297465,"sku":"102914","price":999.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/manfrotto_mf_161_mk2b_super_pro_tripod_161mk2b_01.jpg?v=1778105399"},{"product_id":"manfrotto-carbon-fiber-twin-video-tripod-legs-with-ground-spreader-100-75mm-bowl","title":"Manfrotto Carbon Fiber Twin Video Tripod Legs with Ground Spreader (100\/75mm Bowl)","description":"\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eManfrotto Carbon Fiber Twin Leg Video Tripod Legs with Ground Spreader\u003c\/strong\u003e is suitable for use on flat, smooth surfaces, and it features carbon fibre tubes that are both strong and lightweight while being corrosion resistant. The legs incorporate a 100mm half bowl and include a 75mm adapter ring, so you can use them with heads that have either a 100 or 75mm half ball. The legs support up to 20 kg, which allows you to mount an appropriately sized fluid head, camera, and accessories without straining the capacity of the legs. \u003c\/p\u003e\n\u003cp class=\"mText\"\u003eWith the included ground spreader attached the height of the legs can be adjusted from just under 60cm to over 150cm high, and the legs collapse to under 71cm in length for transport and storage. Removing the included rubber feet reveals the dual spiked feet, which are useful for soft surfaces such as gravel, dirt, or sand. The legs weigh a mere 3 kg, making them easy to take almost anywhere you can go.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Manfrotto Carbon Fiber Twin Video Tripod Legs with Ground Level Spreader\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe integrated lever locks are strong, durable, and increase the torsional stability of the legs.\u003c\/li\u003e\n\u003cli\u003eThe included adapter ring is removable and attaches with three mounting screws. Attaching the adapter converts the 100mm bowl into a 75mm bowl.\u003c\/li\u003e\n\u003cli\u003eThe ground spreader is well suited for use on smooth and flat surfaces and securely attach to the tripod's dual spiked feet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - MVTTWINGC\u003c\/li\u003e\n\u003cli\u003eGTIN - 8024221688719\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Manfrotto","offers":[{"title":"Default Title","offer_id":47111109673145,"sku":"129487","price":1428.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/manfrotto_carbon_fiber_twin_video_tripod_legs_with_ground_spreader_100-75mm_bowl_13.jpg?v=1778107019"},{"product_id":"manfrotto-536-carbon-fiber-video-tripod-legs-only","title":"Manfrotto 536 Carbon Fiber Video Tripod Legs Only","description":"\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eManfrotto 536 Carbon Fiber Video Tripod\u003c\/strong\u003e has four sections and a 75\/100mm bowl adapter ring for industry standard fluid heads. With carbon fibre tubes and magnesium die castings, the 536 boasts great stability, high load capability, and a lightweight.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"\" h2lit\u003eKey Features of the Manfrotto 536 Carbon Fiber Video Tripod Legs Only\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum height: 203 cm\u003c\/li\u003e\n\u003cli\u003eSupports up to 25 Kg\u003c\/li\u003e\n\u003cli\u003eMinimum Height: 71 cm\u003c\/li\u003e\n\u003cli\u003eFolds Down to 28\"\u003c\/li\u003e\n\u003cli\u003eWeighs 3.25 Kg\u003c\/li\u003e\n\u003cli\u003e75\/100mm Bowl Adapter Ring\u003c\/li\u003e\n\u003cli\u003e4 Sections\u003c\/li\u003e\n\u003cli\u003eLeg Angles: 23, 50, 70°\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterials\u003c\/h2\u003e\n\u003cp\u003eThanks to carbon fibre single tube and magnesium die castings, this tripod provides great stability and load capability in a lightweight, ergonomic, easy-to-use and compact design\u003c\/p\u003e\n\u003ch2\u003eAngle Selector\u003c\/h2\u003e\n\u003cp\u003eAn angle selector is offered for adjusting the leg angle in an easy and precise way\u003c\/p\u003e\n\u003ch2\u003eBowl Adapter Ring\u003c\/h2\u003e\n\u003cp\u003eA screw-in bowl adapter ring offers the user the ability to work with 75 or 100mm half-ball heads\u003c\/p\u003e\n\u003cbr\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN -  536\n\u003c\/li\u003e\n\u003cli\u003eGTIN - 8024221531336\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Manfrotto","offers":[{"title":"Default Title","offer_id":47111336165561,"sku":"136100","price":1538.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/manfrotto_536_carbon_fiber_video_tripod_legs_only_01.jpg?v=1778108071"},{"product_id":"manfrotto-504x-fluid-video-head-mvttwinga-aluminum-tripod-with-ground-spreader","title":"Manfrotto 504X Fluid Video Head \u0026 MVTTWINGA  Aluminum Tripod with Ground Spreader","description":"\u003cp class=\"mText\"\u003eSupport your camera rig with the \u003cstrong class=\"h1Lit\"\u003eManfrotto 504X Flat-Base Fluid Video Head and Aluminum Tripod with Ground Spreader\u003c\/strong\u003e. The system features the 504X fluid tripod head, the MVTTWINGA aluminium tripod, a levelling ball to adapt the head to the tripod, and a carry bag.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe head features a 12 Kg maximum load, a pan bar, a quick-release plate, a counterbalance system with four presets, and its open bridge design that provides stable, smooth performance and reduces weight. Its flat base with a 3\/8\"-16 female mounting thread allows compatibility with a wide range of tripods, monopods, sliders, jibs, and dollies, and a variety of rigs.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe twin-leg aluminium tripod provides a 25 kg maximum load and a 75\/100mm ball head mount, and it features a ground spreader for additional stability. The 504X head mounts onto the MVTTWINGA tripod using the included levelling ball. A carry bag is included to store and transport the entire system.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Manfrotto 504X Fluid Video Head \u0026amp; MVTTWINGA Aluminum Tripod with Ground Spreader\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFluid Head with 25 kg Maximum Load\u003c\/li\u003e\n\u003cli\u003eAluminum Tripod, Ground Spreader\u003c\/li\u003e\n\u003cli\u003eLeveling Ball, Carry Bag\u003c\/li\u003e\n\u003cli\u003e4-Step Counterbalance System\u003c\/li\u003e\n\u003cli\u003eFlat Base Head with 3\/8\"-16 Thread\u003c\/li\u003e\n\u003cli\u003e504PLONGR-1 Sliding Quick Release Plate\u003c\/li\u003e\n\u003cli\u003eBubble Level, Aluminum Construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"l1div\"\u003e \u003c\/div\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cstrong\u003eManfrotto 504X Fluid Video Head with Flat Base\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003e Manfrotto 504X Fluid Video Head with Flat Base\u003c\/strong\u003e features an open bridge design that provides a stable, smooth performance while reducing weight. The head's patented bridge technology allows for a wider top surface and longer sliding plate that add stability and balance. The head features a flat base with a 3\/8\"-16 female mounting thread that allows compatibility with a wide range of tripods, monopods, sliders, jibs, and dollies, and a variety of rigs.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eWith its ability to support up to 12 kg, the 504X can be used with a variety of video and photo cameras and rigs. The pan and tilt counterbalance system include four presets from 0 to 2 to 4 to 6 kg, enabling proper balance no matter what the camera's size or weight.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eAt the same time, variable friction components with clearly marked degree scales and vibration-free movement bring new levels of fine-tuning to your tilts and pans. A levelling bubble keeps horizons from tilting, even in the dark, while independent disc-brake locks make sure the head stays secure when at rest.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eWhether you're using a pro camcorder or an accessorized DSLR, the 504X provides a 504PLONGR-1 sliding quick release plate with 1\/4\"-20 and 3\/8\"-16 threads to balance the camera properly on your rig. The head is made from durable aluminium and includes a pan bar that can be attached via rosettes on either the right or left side to help create smooth pan-and-tilt movements.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Manfrotto 504X Fluid Video Head with Flat Base\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFluid drag system for precise, smooth movements\u003c\/li\u003e\n\u003cli\u003eThe wide top surface and long sliding plate for extra stability and balance while using video or photo equipment\u003c\/li\u003e\n\u003cli\u003eFour-step counterbalance system ensures quick setup and optimal performance\u003c\/li\u003e\n\u003cli\u003eRigid structure for maximum precision and improved responsiveness\u003c\/li\u003e\n\u003cli\u003eLightweight aluminium for optimum balance of strength and size\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"l1div\"\u003e \u003c\/div\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cstrong\u003eManfrotto Aluminum Twin Leg Video Tripod with Ground Spreader\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eManfrotto Aluminum Twin Leg Video Tripod with Ground Spreader\u003c\/strong\u003e is a two-stage tripod with a 100mm bowl and a rigid internal leg lock mechanism. A 100-to-75mm bowl adapter is included, so you get the flexibility to use 100 or 75mm video heads. The tripod features twin spiked feet with rubber overshoes, allowing for use on various terrain as well as on flat, smooth surfaces. It supports up to 25 kg and has a maximum working height of 157 cm, minimum height of 33 cm, and folded length of a compact 68 cm.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Manfrotto Aluminum Twin Leg Video Tripod with Ground Spreader\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTwo-stage tripod with a 100mm bowl\u003c\/li\u003e\n\u003cli\u003eRigid internal leg lock mechanism\u003c\/li\u003e\n\u003cli\u003eIncludes aluminium 100-to-75mm bowl adapter\u003c\/li\u003e\n\u003cli\u003eTwin spiked feet with rubber overshoes\u003c\/li\u003e\n\u003cli\u003e25 kg payload\u003c\/li\u003e\n\u003cli\u003e157 cm maximum height\u003c\/li\u003e\n\u003cli\u003e33 cm minimum height\u003c\/li\u003e\n\u003cli\u003e68 cm folded length\u003c\/li\u003e\n\u003cli\u003eGround spreader with telescopic arms\u003c\/li\u003e\n\u003cli\u003eOptional 537SPRB mid-spreader supported\u003c\/li\u003e\n\u003cli\u003eCompatible with the optional Manfrotto 114MV and 181B dollies\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - MVK504XTWINGA\u003c\/li\u003e\n\u003cli\u003eGTIN - 8024221704112\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Manfrotto","offers":[{"title":"Default Title","offer_id":47111569539257,"sku":"138795","price":1880.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/manfrotto_504x_fluid_video_head_mvttwinga_aluminum_tripod_with_ground_spreader-01.jpg?v=1778108917"},{"product_id":"manfrotto-504x-fluid-video-head-mvttwinma-aluminum-tripod-with-mid-level-spreader","title":"Manfrotto 504X Fluid Video Head \u0026 MVTTWINMA Aluminum Tripod with Mid-Level Spreader","description":"\u003cp class=\"mText\"\u003eSupport your camera rig with the \u003cstrong class=\"h1Lit\"\u003eManfrotto 504X Flat-Base Fluid Video Head and Aluminum Tripod with Mid-Level Spreader\u003c\/strong\u003e. The system features the \u003cstrong\u003eManfrotto 504X fluid tripod head\u003c\/strong\u003e, and the \u003cstrong\u003eMandfrotto MVTTWINMA aluminum tripod\u003c\/strong\u003e, also includes a leveling ball to adapt the head to the tripod, and a carry bag.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe head features a 12 kg maximum load, a pan bar, a quick release plate, a counterbalance system with four presets, and its open bridge design that provides a stable, smooth performance and reduces weight. Its flat base with a 3\/8\"-16 female mounting thread allows compatibility with a wide range of tripods, monopods, sliders, jibs, and dollies, and a variety of rigs.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe twin-leg aluminum tripod provides a 24.95 kg maximum load and a 75\/100mm ball head mount, and it features a mid-level spreader for additional stability. The 504X head mounts onto the MVTTWINMA tripod using the included leveling ball. A carry bag is included to store and transport the entire system.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Manfrotto 504X Fluid Video Head \u0026amp; MVTTWINMA Aluminum Tripod with Mid-Level Spreader\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFluid Head with 12 kg Maximum Load\u003c\/li\u003e\n\u003cli\u003eAluminum Tripod, Mid-Level Spreader\u003c\/li\u003e\n\u003cli\u003eLeveling Ball, Carry Bag\u003c\/li\u003e\n\u003cli\u003e4-Step Counterbalance System\u003c\/li\u003e\n\u003cli\u003eFlat Base Head with 3\/8\"-16 Thread\u003c\/li\u003e\n\u003cli\u003e504PLONGR-1 Sliding Quick Release Plate\u003c\/li\u003e\n\u003cli\u003eBubble Level, Aluminum Construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"l1div\"\u003e \u003c\/div\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cstrong\u003eManfrotto 504X Fluid Video Head with Flat Base\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"mText\"\u003eThe Manfrotto 504X Fluid Video Head with Flat Base from Manfrotto features an open bridge design that provides a stable, smooth performance while reducing weight. The head's patented bridge technology allows for a wider top surface and longer sliding plate that add stability and balance. The head features a flat base with a 3\/8\"-16 female mounting thread that allows compatibility with a wide range of tripods, monopods, sliders, jibs, and dollies, and a variety of rigs.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eWith its ability to support up to 12 kg, the 504X can be used with a variety of video and photo cameras and rigs. The pan and tilt counterbalance system includes four presets from 0 to 2.2 to 4.4 to 6.5 kg, enabling proper balance no matter what the camera's size or weight.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eAt the same time, variable friction components with clearly marked degree scales and vibration-free movement bring new levels of fine-tuning to your tilts and pans. A leveling bubble keeps horizons from tilting, even in the dark, while independent disc-brake locks make sure the head stays secure when at rest.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eWhether you're using a pro camcorder or an accessorized DSLR, the 504X provides a 504PLONGR-1 sliding quick release plate with 1\/4\"-20 and 3\/8\"-16 threads to balance the camera properly on your rig. The head is made from durable aluminum and includes a pan bar that can be attached via rosettes on either the right or left side to help create smooth pan-and-tilt movements.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Manfrotto 504X Fluid Video Head with Flat Base\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFluid drag system for precise, smooth movements\u003c\/li\u003e\n\u003cli\u003eWide top surface and long sliding plate for extra stability and balance while using video or photo equipment\u003c\/li\u003e\n\u003cli\u003eFour-step counterbalance system ensures quick setup and optimal performance\u003c\/li\u003e\n\u003cli\u003eRigid structure for maximum precision and improved responsiveness\u003c\/li\u003e\n\u003cli\u003eLightweight aluminum for optimum balance of strength and size\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"l1div\"\u003e \u003c\/div\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cstrong\u003eManfrotto Aluminum Twin Leg Video Tripod with Mid-Level Spreader\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"mText\"\u003eThe Manfrotto Aluminum Twin Leg Video Tripod with Mid-Level Spreader is a two-stage tripod with a 100mm bowl and a rigid internal leg lock mechanism. A 100-to-75mm bowl adapter is included, so you get the flexibility to use 100 or 75mm video heads. The tripod features twin spiked feet with rubber overshoes, allowing for use on various terrain as well as on flat, smooth surfaces. It supports up to 24.95 kg and has a maximum working height of 152.40 cm, minimum height of 58.42 cm, and folded length of a compact 68.58 cm.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe tripod comes with a mid-level spreader with telescopic arms for added stability and for setting the leg angles accurately. The spreader is removable and the optional Manfrotto 165MV ground spreader can be attached instead. The tripod is also compatible with the Manfrotto 114MV and 181B dollies, sold separately.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Manfrotto Aluminum Twin Leg Video Tripod with Mid-Level Spreader\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTwo-stage tripod with a 100mm bowl\u003c\/li\u003e\n\u003cli\u003eRigid internal leg lock mechanism\u003c\/li\u003e\n\u003cli\u003eIncludes aluminum 100-to-75mm bowl adapter\u003c\/li\u003e\n\u003cli\u003eTwin spiked feet with rubber overshoes\u003c\/li\u003e\n\u003cli\u003e24.95 kg payload\u003c\/li\u003e\n\u003cli\u003e152.40 cm maximum height\u003c\/li\u003e\n\u003cli\u003e58.42 cm minimum height\u003c\/li\u003e\n\u003cli\u003e68.58 cm folded length\u003c\/li\u003e\n\u003cli\u003eMid-level spreader with telescopic arms\u003c\/li\u003e\n\u003cli\u003eOptional 165MV ground spreader supported\u003c\/li\u003e\n\u003cli\u003eCompatible with the optional Manfrotto 114MV and 181B dollies\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - MVK504XTWINMA\u003c\/li\u003e\n\u003cli\u003eGTIN - 8024221704105\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Manfrotto","offers":[{"title":"Default Title","offer_id":47111603519673,"sku":"138921","price":1880.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/manfrotto_504x_fluid_video_head_mvttwinma_aluminum_tripod_with_mid-level_spreader-01.jpg?v=1778109047"},{"product_id":"manfrotto-504x-fluid-head-with-carbon-fiber-twin-leg-video-tripod-kit-w-ground-spreader","title":"Manfrotto 504X Fluid Head with Carbon Fiber Twin Leg Video Tripod Kit (w.Ground Spreader)","description":"\u003cp class=\"mText\"\u003eSupport your camera rig with the \u003cstrong class=\"h1Lit\"\u003eManfrotto 504X Flat-Base Fluid Video Head\u003c\/strong\u003e and \u003cstrong class=\"h1Lit\"\u003eManfrotto Carbon Fiber Tripod with Ground Spreader\u003c\/strong\u003e from Manfrotto. The system features the 504X fluid tripod head, the MVTTWINGC carbon fiber tripod, a leveling ball to adapt the head to the tripod, and a carry bag.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe head features a 12 kg maximum load, a pan bar, a quick release plate, a counterbalance system with four presets, and its open bridge design that provides a stable, smooth performance and reduces weight. Its flat base with a 3\/8\"-16 female mounting thread allows compatibility with a wide range of tripods, monopods, sliders, jibs, and dollies, and a variety of rigs.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe twin-leg carbon fiber tripod provides a 20 kg maximum load and a 75\/100mm ball head mount, and it features a ground spreader. The 504X head mounts onto the MVTTWINGC tripod using the included leveling ball. A carry bag is included to store and transport the entire system.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cdiv class=\"l1div\"\u003e \u003c\/div\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cstrong\u003eManfrotto 504X Fluid Video Head with Flat Base\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"mText\"\u003eThe 504X Fluid Video Head with Flat Base from Manfrotto features an open bridge design that provides a stable, smooth performance while reducing weight. The head's patented bridge technology allows for a wider top surface and longer sliding plate that add stability and balance. The head features a flat base with a 3\/8\"-16 female mounting thread that allows compatibility with a wide range of tripods, monopods, sliders, jibs, and dollies, and a variety of rigs.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eWith its ability to support up to 12 kg, the 504X can be used with a variety of video and photo cameras and rigs. The pan and tilt counterbalance system includes four presets from 0 to 2.2 to 4.4 to 6.5 kg, enabling proper balance no matter what the camera's size or weight.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eAt the same time, variable friction components with clearly marked degree scales and vibration-free movement bring new levels of fine-tuning to your tilts and pans. A leveling bubble keeps horizons from tilting, even in the dark, while independent disc-brake locks make sure the head stays secure when at rest.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eWhether you're using a pro camcorder or an accessorized DSLR, the 504X provides a 504PLONGR-1 sliding quick release plate with 1\/4\"-20 and 3\/8\"-16 threads to balance the camera properly on your rig. The head is made from durable aluminum and includes a pan bar that can be attached via rosettes on either the right or left side to help create smooth pan-and-tilt movements.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2\u003eKey Features of the Manfrotto 504X Fluid Video Head with Flat Base\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFluid drag system for precise, smooth movements\u003c\/li\u003e\n\u003cli\u003eWide top surface and long sliding plate for extra stability and balance while using video or photo equipment\u003c\/li\u003e\n\u003cli\u003eFour-step counterbalance system ensures quick setup and optimal performance\u003c\/li\u003e\n\u003cli\u003eRigid structure for maximum precision and improved responsiveness\u003c\/li\u003e\n\u003cli\u003eLightweight aluminum for optimum balance of strength and size\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cdiv class=\"l1div\"\u003e \u003c\/div\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cstrong\u003eManfrotto Carbon Fiber Twin Leg Video Tripod Legs with Ground Spreader (100\/75mm Bowl)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"mText\"\u003eThe Manfrotto Carbon Fiber Twin Leg Video Tripod Legs with Ground Spreader is suitable for use on flat, smooth surfaces, and it features carbon fiber tubes that are both strong and lightweight while being corrosion resistant. The legs incorporate a 100mm half bowl and include a 75mm adapter ring, so you can use them with heads that have either a 100 or 75mm half ball. The legs support up to 20 kilograms, which allows you to mount an appropriately sized fluid head, camera, and accessories without straining the capacity of the legs.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eWith the included ground spreader attached the height of the legs can be adjusted from just over a foot to over 150 cm high, and the legs collapse to under 70 cm in length for transport and storage. Removing the spreader reveals the dual spiked feet, which are useful for soft surfaces such as gravel, dirt, or sand. The legs weigh a mere 3.27 kilograms, making them easy to take almost anywhere you can go.\u003c\/p\u003e\n\u003ch2\u003eManfrotto Carbon Fiber Twin Leg Video Tripod Legs with Ground Spreader (100\/75mm Bowl)\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe integrated lever locks are strong, durable, and increase the torsional stability of the legs.\u003c\/li\u003e\n\u003cli\u003eThe included adapter ring is removable and attaches with three mounting screws. Attaching the adapter converts the 100mm bowl into a 75mm bowl.\u003c\/li\u003e\n\u003cli\u003eThe ground spreader is well suited for use on smooth and flat surfaces, and securely attach to the tripod's dual spiked feet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - MVK504XTWINGC\u003c\/li\u003e\n\u003cli\u003eGTIN - 8024221704136\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Manfrotto","offers":[{"title":"Default Title","offer_id":47111625769145,"sku":"139871","price":2375.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/manfrotto_504x_fluid_head_with_carbon_fiber_twin_leg_video_tripod_kit_w.ground_spreader_-01.jpg?v=1778109152"},{"product_id":"manfrotto-608-nitrotech-fluid-video-head-and-536-carbon-fiber-single-legs-tripod","title":"Manfrotto 608 Nitrotech Fluid Video Head and 536 Carbon Fiber Single Legs Tripod","description":"\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eManfrotto 608 Nitrotech Fluid Video Head and 536 Carbon Fiber Single Legs Tripod \u003c\/strong\u003efeatures a continuous counterbalance system that enables precise control of a camera and accessories up to 8 Kg at 55mm centre of gravity. No matter the camera gear weight you are using you can have constant control despite the tilt degrees you will select. Camera operation will be much easier and effort-free!\u003c\/p\u003e \u003cp class=\"mText\"\u003eOther key features of the head include a side lock camera plate system and two rosette adapters each with a 3\/8\"-16 accessory port and Manfrotto and ARRI anti-rotation slots. A half ball is included to convert the flat base head to fit the tripod, which has a 100mm bowl and 75mm bowl adapter.\u003c\/p\u003e \u003cp class=\"mText\"\u003eWith a native flat base, the 608 Nitrotech can also be easily mounted on sliders, jibs, and other gear. The tripod's single legs can independently be set at 23, 50, and 70° angles. A padded carrying bag is included for the tripod.\u003c\/p\u003e \u003cbr\u003e \u003ch2 class=\"h2Lit\"\u003eKey Features of the Manfrotto 608 Nitrotech Fluid Video Head and 536 Carbon Fiber Single Legs Tripod\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eFluid video head with continuous counterbalance system (0-8 Kg)\u003c\/li\u003e \u003cli\u003eVariable continuous fluid pan \u0026amp; tilt drag system\u003c\/li\u003e \u003cli\u003eFlat base mount ideal for various applications\u003c\/li\u003e \u003cli\u003eLightweight single CF leg tripod, versatile operating height\u003c\/li\u003e \u003c\/ul\u003e \u003cdiv class=\"l1div\"\u003e \u003c\/div\u003e \u003ch2 class=\"h2Lit\"\u003e\u003cstrong\u003eManfrotto 608 Nitrotech Fluid Video Head\u003c\/strong\u003e\u003c\/h2\u003e \u003cp\u003eThe \u003cstrong class=\"h1Lit\"\u003eManfrotto 608 Nitrotech\u003c\/strong\u003e is a flat base fluid video head designed for the versatility needs of the independent content creator who's engaged in different types of projects. Thanks to its flat base with a 3\/8\"-16 mounting thread, as well as its relatively compact and lightweight design, the head can easily be moved between a compatible tripod and a slider, jib, monopod, and various other gear. One of the key features of the 608 Nitrotech is its Nitrogen gas piston counterbalance mechanism (hence, Nitrotech), which allows continuous counterbalance adjustment—as opposed to stepped or fixed—for the head's full payload range of 0 to 8 kg. Additionally, an upgraded fluid technology significantly improves continuously variable drag performance and enables smooth and judder-free pan and tilt movements.\u003c\/p\u003e \u003cp\u003eProviding further flexibility, the head's camera plate system features a side-lock mechanism that allows for quicker and safer mounting of your camera plate and camera load. Instead of having to align and slide in your camera plate from the rear, you're able to conveniently tuck in one side of the plate from the top and then push and click on the other side.\u003c\/p\u003e \u003cp\u003eThe 608 Nitrotech offers two rosette mounts for attaching the included pan bar on either the left or right side. These rosettes also feature Manfrotto's Easy Link system for mounting accessories via an articulating arm. Each rosette has a 3\/8\"-16 port in the centre and both Manfrotto and ARRI anti-rotation slots surrounding the mounting port. The Easy Link system is designed to support Manfrotto articulating arms equipped with anti-rotation pins or those with ARRI locating pins to prevent twisting. At the same time, standard articulating arms can also be attached.\u003c\/p\u003e \u003cp\u003eOther features of the 608 Nitrotech include improved resistance to lower operating temperatures in comparison to previous Nitrotech models and improved ergonomics and materials used for the different knobs.\u003c\/p\u003e \u003cbr\u003e \u003ch2 class=\"h2Lit\"\u003eKey Features of the Manfrotto 608 Nitrotech Fluid Video Head\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eFlat base with 3\/8\"-16 mounting thread allowing for use on tripods, sliders, jibs, monopods, and other support gear\u003c\/li\u003e \u003cli\u003eNitrogen gas piston counterbalance mechanism allows for continuous counterbalance adjustment for the full payload range of 0 to 8 kg\u003c\/li\u003e \u003cli\u003eUpgraded fluid technology enabling smooth and judder-free pan and tilt movements via continuously variable drag performance\u003c\/li\u003e \u003cli\u003eEasier, safer side-lock camera plate mechanism\u003c\/li\u003e \u003cli\u003eTwo rosette mounts with a 3\/8\"-16 port and Manfrotto and ARRI anti-rotation slots for attaching the included pan bar and a standard or anti-twist articulating arm\u003c\/li\u003e \u003cli\u003e5.9\" height\u003c\/li\u003e \u003c\/ul\u003e \u003cdiv class=\"l1div\"\u003e \u003c\/div\u003e \u003ch2 class=\"h2Lit\"\u003e\u003cstrong\u003eManfrotto 536 Carbon Fiber Video Tripod\u003c\/strong\u003e\u003c\/h2\u003e \u003cp\u003eThe \u003cstrong class=\"h1Lit\"\u003eManfrotto 536 Carbon Fiber Video Tripod\u003c\/strong\u003e has four sections and a 75\/100mm bowl adapter ring for industry standard fluid heads. With carbon fibre tubes and magnesium die castings, the 536 boasts great stability, high load capability, and a lightweight.\u003c\/p\u003e \u003cbr\u003e \u003ch2 class=\"h2Lit\"\u003eKey Features of the Manfrotto 536 Carbon Fiber Video Tripod\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eMaximum height: 203 cm\u003c\/li\u003e \u003cli\u003eSupports up to 25 kg\u003c\/li\u003e \u003cli\u003eMinimum Height: 26 cm\u003c\/li\u003e \u003cli\u003eFolds Down to 71 cm\u003c\/li\u003e \u003cli\u003eWeighs 3.25 kg\u003c\/li\u003e \u003cli\u003e75\/100mm Bowl Adapter Ring\u003c\/li\u003e \u003cli\u003e4 Sections\u003c\/li\u003e \u003cli\u003eLeg Angles: 23, 50, 70°\u003c\/li\u003e \u003c\/ul\u003e \u003cdiv class=\"gText\"\u003e \u003cdiv\u003e \u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003e Materials\u003c\/span\u003e\u003c\/h2\u003e \u003cp\u003eThanks to carbon fibre single tube and magnesium die castings, this tripod provides great stability and load capability in a lightweight, ergonomic, easy-to-use and compact design\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eAngle Selector \u003c\/span\u003e\u003c\/h2\u003e \u003cp\u003eAn angle selector is offered for adjusting the leg angle in an easy and precise way\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eBowl Adapter Ring \u003c\/span\u003e\u003c\/h2\u003e \u003cp\u003eA screw-in bowl adapter ring offers the user the ability to work with 75 or 100mm half-ball heads\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cbr\u003e \u003cul class=\"mpn\"\u003e \u003cli\u003eMPN - MVK608CTALL\u003c\/li\u003e \u003cli\u003eGTIN - 8024221698091\u003c\/li\u003e \u003c\/ul\u003e","brand":"Manfrotto","offers":[{"title":"Default Title","offer_id":47111701594297,"sku":"140763","price":3415.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/manfrotto_mvk608ctall_nitrotec_608_carbon_tripod_system_01.jpg?v=1778109385"},{"product_id":"manfrotto-504x-fluid-video-head-with-635-fast-carbon-fiber-single-leg-tripod","title":"Manfrotto 504X Fluid Video Head with 635 Fast Carbon Fiber Single Leg Tripod","description":"\u003cp class=\"mText\"\u003eThis video system includes the Manfrotto 504X Fluid Video Head and the 635 Fast Single-Leg Carbon Tripod.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eManfrotto 504X fluid video head\u003c\/strong\u003e with a flat base features the new Manfrotto fluid technology which allows smoother operation and unrivalled stability in both pan and tilt movements. It presents a 4-step counterbalance system that can take loads of up to 6.5 kg at 55 mm C.O.G.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe tripod head is made from a brand-new catching aluminium design and has a maximum payload of 12 kg.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eIt is a compact and light head with a flat base (base diameter 75 mm), that lets you choose from a wide variety of different shooting options. It also features two 3\/8” Easy Link connectors, equipped with an anti-rotation function that enables the fitting of external monitors or other accessories. A cap fits over the easy link, to avoid cutting during use. The sliding plate attachment and side-lock mechanism allow safe, quick and easy camera attachment.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe 635 Fast Single Tripod was developed with the primary objective of making video shooting easier by reducing set-up times and maintenance. The FAST Twisting Lock technology enables videographers to control the entire leg with a single lock and get to work in record time. The new tripod provides maximum versatility, supporting the use of a broad choice of heads, and ensuring the utmost rigidity while also being extremely lightweight.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eIt is compatible with the 2-in-1 ground and middle telescopic spreader (sold as an optional accessory) and features a 3-angle selection mechanism for easy set-up. It is equipped with spiked feet with rubber overshoes for a firm grip and adaptability to the most diverse shooting locations.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eSupplied with its own padded carrying bag.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Manfrotto 504X Fluid Video Head with 635 Fast Carbon Fiber Single Leg Tripod\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFluid video head with 4-step counterbalance system up to 6.5 kg.\u003c\/li\u003e\n\u003cli\u003eMaximum versatility thanks to flat base\u003c\/li\u003e\n\u003cli\u003eFAST Twisting Lock  secure locking with a single gesture\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber single leg tripod for greater rigidity\u003c\/li\u003e\n\u003cli\u003eSidelock plate attachment and two 3\/8'' easy link connectors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - MVK504XSNGFC\u003c\/li\u003e\n\u003cli\u003eGTIN - 8024221704167\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Manfrotto","offers":[{"title":"Default Title","offer_id":47111723319481,"sku":"140953","price":2645.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/manfrotto_504x_fluid_video_head_with_635_fast_carbon_fiber_single_leg_tripod_01.jpg?v=1778109460"},{"product_id":"manfrotto-aluminum-telescopic-twin-leg-video-tripod","title":"Manfrotto Aluminum Telescopic Twin Leg Video Tripod","description":"\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eManfrotto's MVT502AM Aluminum Telescopic Twin Leg Video Tripod\u003c\/strong\u003e is lightweight support designed for DSLRs, camcorders and light video cameras. The telescopic twin-leg structure and ellipse-profile aluminium tubes provide rigid and secure support, along with leg locking collars, first-stage spreader and high-grip rubber feet. The 2-stage\/3-section MVT502AM has a 75mm bowl (with a 60 mm adapter) for compatibility with professional video heads.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Manfrotto MVT502AM Aluminum Telescopic Twin Leg Video Tripod\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal high-performance tripod for HDSLRs and camcorders with accessories\u003c\/li\u003e\n\u003cli\u003eRigid and stable telescopic twin-leg design with mid-level spreader\u003c\/li\u003e\n\u003cli\u003eCompact when closed, easy to transport with built-in carrying handle\u003c\/li\u003e\n\u003cli\u003eCompatible with all professional 75mm\/60mm half-ball video heads\u003c\/li\u003e\n\u003cli\u003eFast, simple and smooth set-up with ergonomic quick-release leg locking collars and new rubber feet that grip all surfaces and protect delicate floors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - MVT502AM\u003c\/li\u003e\n\u003cli\u003eGTIN - 8024221604054\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Manfrotto","offers":[{"title":"Default Title","offer_id":47111738523833,"sku":"141838","price":740.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/manfrotto_mvt502am_aluminum_telescopic_twin_leg_video_tripod_01.jpg?v=1778109514"},{"product_id":"manfrotto-536-carbon-fiber-tripod-with-509hd-video-head-and-padded-carry-bag","title":"Manfrotto 536 Carbon Fiber Tripod with 509HD Video Head and Padded Carry Bag","description":"\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eManfrotto 536 Carbon Fiber Tripod with 509HD Video Head and Padded Carry Bag\u003c\/strong\u003e offers a complete tripod solution for professional video camera systems weighing up to 13.1 kg. A 4-step counterbalance mechanism of the 509HD head ensures optimum balance and allows the videographer to get the camera in position quickly. The tripod head features ergonomic adjustments, easy-link connectors and uses light-weight PVC free materials in its components. Featuring the Bridging Technology with a ball bearing drag system, the tripod head offers professional quality stability as well as precise, smooth movements.\u003cbr\u003e\u003cbr\u003eA unique Advance Balancing Recorder feature can record the perfect balanced position for your camera equipment so that the position can be recalled later on. This electronic ABR feature reduces the time needed for setting up and balancing your camera system on the tripod head.\u003cbr\u003e\u003cbr\u003eThe 536 video tripod legs feature a 3-stage design which comfortably support the 509HD head and professional camera equipment. Carbon fiber ensures sturdy construction and extremely light weight 3.25 kg for a professional video camera tripod. The leg angle selector allows you to quickly adjust the leg angles in a precise way.\u003cbr\u003e\u003cbr\u003eA padded bag included in the kit is useful to store as well as carry the 536 tripod legs with the 509HD head.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003ch2 class=\"h2Lit\"\u003eKey Features of the Manfrotto 536 Carbon Fiber Tripod with 509HD Video Head and Padded Carry Bag\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eLoad Capacity up to 13.1 kg\u003c\/li\u003e \u003cli\u003e4-Step Counterbalance Mechanism\u003c\/li\u003e \u003cli\u003eBridging Technology\u003c\/li\u003e \u003cli\u003eAdvance Balancing Recorder\u003c\/li\u003e \u003cli\u003e3-Stage Carbon Fiber Legs\u003c\/li\u003e \u003cli\u003eAdvanced Leg Angle Selector\u003c\/li\u003e \u003cli\u003eScrew-in 75\/100mm Ball Adaptor\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e \u003cul class=\"mpn\"\u003e \u003cli\u003eMPN - 509HD.536K\u003c\/li\u003e \u003cli\u003eGTIN - 8024221583465\u003c\/li\u003e \u003c\/ul\u003e","brand":"Manfrotto","offers":[{"title":"Default Title","offer_id":47111842398393,"sku":"142830","price":2999.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/manfrotto_video-01.jpg?v=1778109874"},{"product_id":"manfrotto-virtual-reality-aluminum-base-with-half-ball-leveler","title":"Manfrotto Virtual Reality Aluminum Base with Half Ball Leveler","description":"\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eManfrotto Virtual Reality Aluminum Base with Half Ball Leveler\u003c\/strong\u003e is the perfect companion for virtual reality photographers and videographers looking for stable and compact support for their 360° cameras. This mini tripod is not only ergonomically designed in strong aluminium, but it’s also significantly lighter and more compact than a traditional tripod, so that it can easily be taken anywhere. The half bowl makes it possible to quickly level the mini base so you're ready to shoot whenever the need arises. With its three leg-angles, the height easily adjusts from 11.6 cm to 24.3 cm so you can position your camera as precisely as possible.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eIt is perfect in combination with MBOOMCFVR-S and MBOOMCFVR-M boom extensions (sold separately) to reach multiple heights with 360° devices, making it possible to obtain many creative viewpoints.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThis support is extremely sturdy and stable and guarantees minimal footprint thanks to its compactness. For further technical details, check the specifications and instruction manual in the download area.\u003c\/p\u003e\n\u003ch2\u003eKey Features of the Manfrotto Virtual Reality Aluminum Base with Half Ball Leveler\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-duty lightweight aluminium base\u003c\/li\u003e\n\u003cli\u003eRugged design and spiked feet help keep outdoor shots stable\u003c\/li\u003e\n\u003cli\u003eHalf bowl included to quickly level shots\u003c\/li\u003e\n\u003cli\u003eIndependent leg angle selection for increased stability\u003c\/li\u003e\n\u003cli\u003eSupports up to 20kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - MBASEPROVR\u003c\/li\u003e\n\u003cli\u003eGTIN - 719821413882\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Manfrotto","offers":[{"title":"Default Title","offer_id":47112797880505,"sku":"139631","price":665.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/manfrotto_virtual_reality_aluminum_base_with_half_ball_leveler.jpg?v=1778114146"}],"url":"https:\/\/www.digidirect.com.au\/collections\/tripods-and-monopods.oembed","provider":"digiDirect","version":"1.0","type":"link"}