{"title":"Sachtler Tripods","description":null,"products":[{"product_id":"sachtler-tripod-flowtech-75-ms-legs-only","title":"Sachtler Tripod flowtech 75 MS Legs Only","description":"\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eSachtler flowtech 75 GS Carbon Fiber Tripod\u003c\/strong\u003e eschews the common single or double carbon fibre tube design and instead has redesigned the shape of the legs for improved torsional strength. The legs weigh just under 3 Kg yet they can support a payload of up to 20 Kg and extend from a minimum height of 25 Kg to a maximum height of 158 Kg when using the included ground spreader. Each leg features a single clamping lever that locks and unlocks the sections.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eEach leg extends or retracts independently from the other two, and when it is detached from the spreader each leg can pivot without affecting the other legs. This is especially useful when working on rough or uneven terrain. You can remove the spreader completely and lock each leg in one of three positions, so you can work without a spreader if you wish. This enables you to spread the legs extremely wide for low shots, while the tripod legs maintain their torsional stability. The dual spikes at the end of each leg provide extra grip when working on the softer ground without the spreader.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Feature of the Sachtler Tripod flowtech 75 MS Legs Only\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDual-stage, carbon fibre, 75mm bowl tripod\u003c\/li\u003e\n\u003cli\u003eThe design and construction of the legs provide tremendous torsional stability. In other words, the legs resist twisting when you pan the tripod head.\u003c\/li\u003e\n\u003cli\u003eThe included ground spreader snaps easily onto the dual-spiked feet using a combination elastic and lever attachment system. The rubber feet are removable from the spreader and can be attached directly to the dual spiked feet of the legs for operation on hard\/delicate surfaces without the spreader.\u003c\/li\u003e\n\u003cli\u003eEach leg features a single clamping lever lock design at the top of the leg, near the 75mm bowl. This allows you to loosen all three leg sections from a single location, saving you time while reducing the wear and tear on your body as you don't have to bend down to loosen a leg lock at the bottom to lower or raise the legs.\u003c\/li\u003e\n\u003cli\u003eThe legs incorporate a locking mechanism that enables the legs to move completely freely, suitable when working with a spreader, or to lock at one of three angles, suitable for use when working without a spreader.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - ST-4585\u003c\/li\u003e\n\u003cli\u003eGTIN - TBA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sachtler Tripods","offers":[{"title":"Default Title","offer_id":47111189364921,"sku":"131955","price":3765.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/sachtler_tripod_flowtech_75_ms_legs_only-02.jpg?v=1778107367"},{"product_id":"sachtler-aktiv8-flowtech75-ms-tripod-system","title":"Sachtler aktiv8 Flowtech75 MS Tripod System","description":"\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eSachtler aktiv8 flowtech75 MS Tripod System\u003c\/strong\u003e pairs the activ8 fluid head with the lightweight, carbon fibre flowtech 75 MS tripod with a mid-level spreader. This kit offers lightning-fast SpeedSwap technology, a sideload camera plate, 15 levels (+0) of counterbalance, 7 levels (+0) of pan and tilt drag, and stable support for the camera rigs weighing up to 12 kg. A padded carrying bag rounds out this tripod kit.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler aktiv8 flowtech75 MS Tripod System\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eaktiv8 Sideload Fluid Head\u003c\/li\u003e\n\u003cli\u003eflowtech75 Tripod\u003c\/li\u003e\n\u003cli\u003eMid-Level Spreader, Carry Handle, Bag\u003c\/li\u003e\n\u003cli\u003eSpeedSwap Clamp-Style Base\u003c\/li\u003e\n\u003cli\u003eSpeedLevel Technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"l1div\"\u003e \u003c\/div\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cstrong\u003eSachtler aktiv8 Sideload Fluid Head with SpeedLevel \u0026amp; 7-Step Drag for Select Sachtler Tripods (75mm)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eSachtler aktiv8 Sideload Fluid Head\u003c\/strong\u003e truly innovative SpeedLevel technology to provide almost instant mounting and levelling of your camera rig on select Sachtler tripods The clamp and stud SpeedLevel system saves precious time levelling your camera rig by eliminating the need to screw on a tie-down knob. Designed for documentary, news, and corporate productions, the aktiv8 supports rigs weighing up to 12 kg. This 75mm ball fluid head features 15 steps of counterbalance and seven steps of pan and tilt drag adjustment, plus zero settings for both balance and drag.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe SpeedLevel technology replaces the traditional head screw and tie-down design with a strong clamp built into the head bowl and a stud component that clamps onto your tripod bowl or another mounting platform, such as a slider. Simply grasp the large lever on the head and pull it up to release the clamp, then press it down to lock your head in place. Partially lifting the lever allows you to quickly and easily level the head.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eWhen used with a separately available flowtech tripod, the aktiv8 enables you to spread the legs flat, getting as low to the ground as your head can without a tie-down knob getting in the way. You can also now mount your head directly onto a slider using a separately available Aktiv system stud that screws onto support systems with a 3\/8\"-16 threaded stud.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe PrismBubble level system is pressed once to illuminate the bubble level to be illuminated or pressed twice to light up both the bubble level and the drag settings, a boon when working in darker environments. The bubble level also has a built-in prism, enabling you to more easily level the head when the legs are set at maximum height or an awkward angle.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eMount your camera using the included Sideload Plate S that has both a 1\/4-20 camera screw and a locating pin to prevent twisting. With a sliding range of 12 cm, this head balances quickly to accommodate variously configured rigs The Sachtler aktiv8 head also features a detachable pan bar that can be mounted onto the rosettes on either the right or left side of the head.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler aktiv8 Sideload Fluid Head\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFor Tripod Heads with a 75mm Ball\u003c\/li\u003e\n\u003cli\u003eTwo-Stage, Three-Section Standard Legs\u003c\/li\u003e\n\u003cli\u003eSupports up to 20 kg\u003c\/li\u003e\n\u003cli\u003eHeight Range Approximately 61 to 155 cm\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber Construction\u003c\/li\u003e\n\u003cli\u003eDual Spiked Feet, Removable Rubber Feet\u003c\/li\u003e\n\u003cli\u003eRemovable Mid-Level Spreader\u003c\/li\u003e\n\u003cli\u003eIndependent Leg Movement and Adjustment\u003c\/li\u003e\n\u003cli\u003eMagnetic Transport Lock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"gText\"\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eaktiv Fluid Head Compatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe aktiv6 and aktiv8 fluid heads are compatible with Sachtler 75mm tripods (flowtech 75 aktiv, Tripod 75\/2 AL, SpeedLock 75, ENG 75\/2 D, and DA 75L)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eSpeedLevel Technology\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eUse the large integrated lever to quickly mount, level, and lock the head on your tripod or another base; lift to release, lift partially to level, and press down to lock the head firmly in place\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eSpeedSwap Base\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eCentred around a metal stud, the SpeedSwap base clamps onto any 75mm bowl tripod or to the separately available slider base; additional bases can be purchased separately to fit a second tripod, dolly, or slider\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003ePrismBubble Level\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe illuminated PrismBubble is visible from any height or angle, saving you time when levelling at higher or lower positions\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003e12 kg Capacity Fluid Head\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThis 12 kg capacity fluid head is suited for larger DSLRs, mirrorless MFT cameras, and pro-style digital cine cameras\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eStepped Counterbalance and Drag\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e15 steps of counterbalance and seven steps of pan and drag plus zero settings for free spins and tilts\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eSideload Plate\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe sideload plate has 12 cm of travel for balancing your rig and both 1\/4\"-20 and 3\/8\"-16 camera screws\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"l1div\"\u003e \u003c\/div\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cstrong\u003eSachtler Flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003e Sachtler Flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet eschews\u003c\/strong\u003e the common single or double carbon fibre tube design and instead has redesigned the shape of the legs for improved torsional strength. The legs work weigh just under 3 kg yet they can support a payload of up to 20 kg, and extend from a minimum height of 61 cm to a maximum height of 155 cm when using the included removable mid-level spreader. Each leg features a single clamping lever that locks and unlocks the sections.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eEach leg extends or retracts independently from the other two, and when it is detached from the spreader each leg can pivot without affecting the other legs. This is especially useful when working on rough or uneven terrain. You can remove the spreader completely and lock each leg in one of three positions, so you can work without a spreader if you wish. This enables you to spread the legs extremely wide for low shots, while the tripod legs maintain their torsional stability. The dual spikes at the end of each leg provide extra grip when working on softer ground, and you can snap rubber feet onto the dual spikes for better grip when working on hard or delicate surfaces.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler Flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDual-stage, carbon fibre, 75mm bowl tripod\u003c\/li\u003e\n\u003cli\u003eWeighs only 3 kg but supports up to 44 pounds\u003c\/li\u003e\n\u003cli\u003eThe design and construction of the legs provide tremendous torsional stability. In other words, the legs resist twisting when you pan the tripod head.\u003c\/li\u003e\n\u003cli\u003eThe included mid-level spreader allows you to work on uneven terrains such as stairs or rocks while preventing the legs from flying apart. When using the mid-level spreader, you can use the included rubber feet to protect delicate surfaces from the tripod's foot spikes.\u003c\/li\u003e\n\u003cli\u003eEach leg features a single clamping lever lock design at the top of the leg, near the 75mm bowl. This allows you to loosen all three leg sections from a single location, saving you time while reducing the wear and tear on your body as you don't have to bend down to loosen a leg lock at the bottom to lower or raise the legs.\u003c\/li\u003e\n\u003cli\u003eThe legs incorporate a locking mechanism that enables the legs to move completely freely, suitable when working with a spreader, or to lock at one of three angles, suitable for use when working without a spreader.\u003c\/li\u003e\n\u003cli\u003eWhen closing the legs, there is room for the mid-level spreader to be folded up while remaining attached. The legs feature a magnetic locking system strong enough to hold them together during transport but allow you to easily release the legs when you want to set them up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"l1div\"\u003e \u003c\/div\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cstrong\u003eSachtler Padded Bag for flowtech 75 or TT Tripod with FSB Fluid Head\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"mText\"\u003eWith dimensions of 93 x 20 x 23 cm, this \u003cstrong class=\"h1Lit\"\u003eSachtler Padded Bag \u003c\/strong\u003eis designed specifically for carrying a flowtech 75 or TT tripod equipped with an FSB fluid head. It is made with a high-density 900D fabric, which is both flame retardant and water-resistant to help ensure that your equipment stays safe. Additionally, layers of both open-cell and closed-cell foam are used in the construction to protect your gear against small bumps and shocks.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe bag opens via a full-length zipper found at the top, which allows for easy access while shooting. For transport, two straps on each side can be connected to an integrated handgrip for easy carrying. There are also small handles on each side of the bag where the zipper ends, and right next to them are D-rings that can be used to connect an optional shoulder strap. Finally, a clear plastic window on the outside allows you to insert a tag with your name or phone number for easy identification when travelling.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler Padded Bag for flowtech 75 or TT Tripod with FSB Fluid Head\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePadded bag with dimensions of 93 x 20 x 23 cm, designed for carrying a flowtech 75 or TT tripod with an FSB fluid head\u003c\/li\u003e\n\u003cli\u003e900D water-resistant fabric on the exterior, with layers of foam to help cushion gear against bumps\u003c\/li\u003e\n\u003cli\u003eA full-length zipper allows for easy access to the interior compartment\u003c\/li\u003e\n\u003cli\u003eConnecting hand straps, side handles, and D-rings available for transport\u003c\/li\u003e\n\u003cli\u003eA clear plastic window on one of the sides allows you to insert a name tag for easy identification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - ST-S2068S-FTMS\u003c\/li\u003e\n\u003cli\u003eGTIN - 5060520687315\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sachtler Tripods","offers":[{"title":"Default Title","offer_id":47111669842105,"sku":"140466","price":7775.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/sachtler_aktiv8_flowtech75_01.jpg?v=1778109291"},{"product_id":"sachtler-aktiv10-sideload-fluid-head-with-speedlevel-for-select-100mm-sachtler-tripods","title":"Sachtler aktiv10 Sideload Fluid Head with SpeedLevel for Select 100mm Sachtler Tripods","description":"\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eSachtler aktiv10 Sideload Fluid Head\u003c\/strong\u003e uses truly innovative SpeedLevel technology to provide almost instant mounting and levelling of your camera rig on select Sachtler tripods. The clamp and stud SpeedLevel system saves precious time levelling your camera rig by eliminating the need to screw on a tie-down knob. Designed for documentary, news, and corporate production, the aktiv10 supports camera rigs weighing up to12 kg. This 100mm ball fluid head also features 15 steps of counterbalance, seven steps of pan and tilt drag, and zero settings for both balance and drag.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe proprietary Sachtler SpeedLevel technology replaces the traditional head screw and tie-down design with a strong clamp built into the head bowl and a stud component that clamps onto your tripod bowl or another mounting platform, such as a slider. Simply grasp the large lever on the head and pull it up to release the clamp, then press it down to lock your head in place. Partially lifting the lever allows you to quickly and easily level the head.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eWhen used with a separately available flowtech tripod, the aktiv10 enables you to spread the legs flat for extremely low shots without a tie-down knob getting in the way. You can also mount your head directly onto a slider using a separately available Aktiv system stud that screws onto support systems with a 3\/8\"-16 threaded stud.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe active 10's PrismBubble is a built-in prism level with two viewing windows that enable you to more easily level the head when the legs are set at maximum height or at an awkward angle. The bubble level also has two levels of illumination—press once to light up the bubble level or hold longer to illuminate both the bubble level and the counterbalance and drag settings, a boon when working in darker environments.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eMount your camera using the included Sideload Plate S that has both a 1\/4-20 camera screw and a locating pin to prevent twisting. With a sliding range of 12 cm, this head balances quickly to accommodate variously configured rigs. The Sachtler aktiv10 head also features a detachable pan bar that can be mounted onto the rosettes on either the right or left side of the head.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler aktiv10 Sideload Fluid Head with SpeedLevel for Select 100mm Sachtler Tripods\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e12 kg Capacity Fluid Drag Head\u003c\/li\u003e\n\u003cli\u003e100mm Half Ball\u003c\/li\u003e\n\u003cli\u003eSpeedSwap Clamp-Style Base\u003c\/li\u003e\n\u003cli\u003eSpeedLevel Technology\u003c\/li\u003e\n\u003cli\u003eSideload Plate with 12 cm Sliding Range\u003c\/li\u003e\n\u003cli\u003e15-Step + 0 Counterbalance\u003c\/li\u003e\n\u003cli\u003e7-Step + 0 Pan\/Tilt Drag\u003c\/li\u003e\n\u003cli\u003eIlluminated Prism Bubble Adds Visibility\u003c\/li\u003e\n\u003cli\u003e+90° to -70° Tilt Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"gText\"\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eSpeedLevel Technology\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eUse the large integrated lever to quickly mount, level, and lock the head on your tripod or another base; lift up to release, lift partially to level, and press down to lock the head firmly in place\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eSpeedSwap Base\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eCentred around a metal stud, the SpeedSwap base clamps onto any 100mm bowl tripod or the separately available slider base; additional bases can be purchased separately to fit a second tripod, dolly, or slider\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003ePrismBubble Level\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe illuminated PrismBubble is visible from any height or angle, saving you time when levelling at higher or lower positions\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003e12 kg Capacity Fluid Head\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThis 12 kg capacity fluid head is suited for pro-style digital cine cameras and larger DSLR and mirrorless camera rigs\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eStepped Counterbalance and Drag\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eFifteen steps of counterbalance and seven steps of pan and drag plus zero settings, for free spins and tilts\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eSideload Plate S\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Sideload Plate S has 12 cm of travel for balancing your rig and both a 1\/4\"-20 camera screw and a locating pin\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - ST-S2072S\u003c\/li\u003e\n\u003cli\u003eGTIN - 5060520688404\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sachtler Tripods","offers":[{"title":"Default Title","offer_id":47111670628537,"sku":"140470","price":5895.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/sachtler_aktiv10_01.jpg?v=1778109293"},{"product_id":"sachtler-aktiv10-flowtech-100-ms-tripod-system","title":"Sachtler aktiv10 flowtech 100 MS Tripod System","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cstyle\u003e\u003c!--\nh2.h2Lit {padding-block-start: 0.6rem;margin-block-end: 0.5rem;}\n        .gText h2, .gText3 h2, .gText4 h2, .gText5 h2 {line-height:0.7;}\n        h2.lh1 {line-height: 1;}\n        h3.uLit {padding-top: 1rem; margin-bottom: -0.2rem;}\n        span.h2Lit, .h1Lit {color: #ff6600; font-weight: bold;}\n        .h1Lit {font-size: large;}\n        span.h2Lit, p.mText, blockquote.descQ {font-size: medium;}\n        blockquote.descQ footer {font-size: small; }\n        blockquote.descQ {background-color: rgb(237, 237, 237); padding: 0.5rem; width: 80%;}\n        blockquote.descQ p{padding: 0.5rem 0.5rem 0 0.5rem;}\n        Ul.mpn {color: #888888;}\n        span.ind{padding-left: 1rem;}\n        table.descTable tr {vertical-align: top;}\n        table.descTable th, table.descTable td {width: 50%; text-align: left; padding: 0 1rem 0 1rem;}\n        table.descTable th {padding-top:1.5rem;}\n        table.bTable {width: auto;}\n        table.bTable th {text-align: left; padding-top:1rem; padding-bottom: 1rem; width: auto; font-size: 1vw;}\n            .bDs {padding:0.5rem; box-shadow: 0rem 0.2rem 0.5rem  rgba(0,0,0,0.6); border-radius:0.5rem; border}\n            @media only screen and (min-width:200px) and (max-width:1000px) {\n                table.bTable th {font-size:3vw;}\n            }\n        .gText div, .gText3 div, .gText4 div, .gText5 div {padding:1rem;}\n        .gText {display:grid; grid-template-columns: repeat(auto-fill,minmax(50%, 1fr));}\n        .gText3 {display:grid; grid-template-columns: repeat(auto-fill,minmax(33.33%, 1fr));}\n        .gText4 {display:grid; grid-template-columns: repeat(auto-fill,minmax(25%, 1fr));}\n        .gText5 {display:grid; grid-template-columns: repeat(auto-fill,minmax(20%, 1fr));}\n                @media only screen and (min-width:200px) and (max-width:1000px) {\n                        .gText, .gText3, .gText4, .gText5 {display:grid; grid-template-columns: repeat(auto-fill,minmax(100%, 1fr));}\n            }\n        .bDs1 {width:fit-content; box-shadow: 0rem 0.2rem 0.5rem  rgba(0,0,0,0.6); border-radius:0.5rem; border}\n        .iDs1 {padding: 0.7rem;}\n        .l1div {border-bottom: 0.1rem solid #000;}\n        .dBor {padding:1rem;border:0.1rem solid #000;}\n            .dMobile {border-top: solid .3rem #000; border-radius: 1rem; box-shadow: #000 0.1rem 0.1rem 0.3rem;}\n            .dMobi {padding-left: 1rem; padding-right: 1rem;}\n            u.h1Lit {font-size: large;}\n        .aquaList li {padding-top: 0.5rem;}\n        .aquaList li::first-line {font-weight: bolder;}\n--\u003e\u003c\/style\u003e\n\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eSachtler aktiv10 flowtech 100 MS Tripod System\u003c\/strong\u003e pairs the activ10 fluid head with the lightweight, carbon fiber plate, 15 levels(+0) of pan and tilt drag, and stable support for camera rigs weighing up to 12 kg. A padded carrying bag rounds out this tripod kit.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler aktiv10 flowtech 100 MS Tripod System\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eaktiv10 Sideload Fluid Head\u003c\/li\u003e\n\u003cli\u003eFlowtech 100 Tripod, Mid Spreader \u0026amp; Bag\u003c\/li\u003e\n\u003cli\u003eSpeedSwap Clamp-Style Base\u003c\/li\u003e\n\u003cli\u003eSpeedLevel Technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"l1div\"\u003e \u003c\/div\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cstrong\u003eSachtler 1ktiv10 Sideload Fluid Head with SpeedLevel \u0026amp; 7- Step Drag for Select Sachtler Tripod(100mm Ball)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003e Sachtler aktiv10 Sideload Fluid Head \u003c\/strong\u003etruly innovative SpeedLevel technology to provide almost instant mountng and leveling of your camera rig on select sachtler tripod. The clamp and stud SpeedLevel system saves precious time leveling your camera rig by eliminating the need to screw on a tie-down knob.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe proprietary Sachtler SpeedLevel technology replaces the tradional head screw and tie-down design with a strong clamp built into the head bowl and a stud component that clamps onto your tripod bowl or other mounting platform, such as a slider. Simply grasp the large lever on the head and pull it up to release the clamp, then press it down to lock your head in place. Partially lifting the lever alows you to quickly and easily level the head.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eWhen used with a separately available flowtech tripod, the aktiv10 enables you to spread the legs flat for extremely low shots without a tie-down knob getting in the way. You can also mount your head directly onto a slder using a separately available aktiv system stud that screws onto systems with a 3\/8\"-16 threaded stud.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe active 10's PrismBubble is a built-in prism level with teo viewing windows that enables you to more easily level the head when the legs are at set at maximum height or at an awkward angle. The bubble level also has two levels of illumination press once to light up the bubble level or hold longer to illuminate both the bubble level and the counterbalance and drag setting, a boon when working in darker environments.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eMount your camera using the included Sideload Plate S that has a both a 1\/4-20 camera screw camera and a locating pn to preven twisting, with a sliding range of 12 cm, this head balances quickly to accomodate variously cofigured rigs. The Sachtler aktiv10 head also features a detachable pan bar that can be mounted onto the rosettes on either the right or left side of the head.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler aktiv10 Sideload Fluid Head with SpeedLevel \u0026amp; 7-Step Drag for Select Sachtler Tripods ((100mm Ball)\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e12 kg Capacity Fluid Drag Head\u003c\/li\u003e\n\u003cli\u003e100mm Half Ball\u003c\/li\u003e\n\u003cli\u003eSpeedSwap Clamp-Style Base\u003c\/li\u003e\n\u003cli\u003eSpeedLevel Technology\u003c\/li\u003e\n\u003cli\u003eSideload Plate with 12 cm Sliding Range\u003c\/li\u003e\n\u003cli\u003e15-Step + 0 Counterbalance\u003c\/li\u003e\n\u003cli\u003e7-Step + 0 Pan\/Tilt Drag\u003c\/li\u003e\n\u003cli\u003eIlluminated Prism Bubble Adds Visibility\u003c\/li\u003e\n\u003cli\u003e+90° to -70° Tilt Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"gText\"\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eaktiv Fluid Head Compatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe aktiv10 is compatible with Sachtler 100mm tripods(flowtech 100, Eng 2 CF, ENG 2D, ENG 2 CF HD, SpeedLock, and SpeedLock CF HD)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eSpeedLevel Technology\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eUse the large integrated lever to quickly mount, level, and lock the head on your tripod or other base; lift up to release, lift partially to level, and press down to lock the head firmly in place\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eSpeedSwap Base\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eCentered around a metal stud, the SpeedSwap base clamps onto any 100mm bowl tripod or the separately available slider base; additional bases can be purchased separately to fit a second tripod, dolly, or slider\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003ePrismBubble Level\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe illuminated PrismBubble is visible from any height or angle, saving you time when leveling at higher or lower positions\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003e12 kg Capacity Fluid Head\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThis 12 kg capacity fluid head is suited for pro-style digital cine cameras and larger DSLR and mirrorless camera rigs\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eStepped Counterbalance and Drag\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eFifteen steps of counterbalance and seven steps of pan and drag plus zero settings, for free spins and tilts\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eSideload Plate S\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Sideload Plate S has 12 cm of travel for balancing your rig and both a 1\/4\"-20 camera screw and a locating pin\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"l1div\"\u003e \u003c\/div\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cstrong\u003eSachtler flowtech 100 MS Carbon Fiber Tripod with Mid-Level Spreader \u0026amp; Rubber Feet\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"mText\"\u003eThe lighwieght \u003cstrong class=\"h1Lit\"\u003eSachtler flowtech 100 MS Carbon Fiber Tripod with Mid-Level Spreader\u003c\/strong\u003e offers notable stability and quick setup and adjustments for payloads up to 30 kg. The novel flowtech design features quick release locks at the top of the legs, eliminating the need to stoop while adjusting the tripod height. All three legs can be deployed simultaneously to quickly find their individual levels on uneven ground.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe flowtech 100's versatile leg hinges adjust freely or can be locked at 20, 46, and 72° angles, providing a height range from 25 cm to 1m and reducing the need to carry a set of baby legs. Additional ergonomic features include a flatter leg design that's more comfortable when carrying on your shoulder, and magnetic locks that neatly snap the legs together for travel. Three handy 3\/8\"-16 threaded mounts can be used to attach a variety of accessories.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eWeighing only nine pounds with its spreader and feet, the flowtech 100 can support a payload of up to 30 kg and extends from a minimum height of 50 cm to a maximum height of 155 cm when using the included mid-level spreader. Each leg features a single clamping lever that quickly and easily locks and unlocks the three sections.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eDesigned with dual-spiked feet, this 100mm bowl tripod includes rubber feet that feature a quick release design for easy attaching and removal. A flowtech Carry Handle is included to enable carrying your flowtech system in one hand.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003e \u003c\/p\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Featureso of the Sachtler flowtech 100 MS Carbon Fiber Tripod with Mid-Level Spreader \u0026amp; Rubber Feet\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDual-stage, carbon fiber 100mm bowl tripod\u003c\/li\u003e\n\u003cli\u003eSupports up to 30 kg, yet weighs only 4 kg\u003c\/li\u003e\n\u003cli\u003eHigh torsional stability prevents the legs from twisting when panning your head\u003c\/li\u003e\n\u003cli\u003eBrake levers at the top of the tripod quickly release all three sections simultaneously, enabling speedy setups\u003c\/li\u003e\n\u003cli\u003eFlatter, ergonomic leg design for more comfortable over-the-shoulder carrying\u003c\/li\u003e\n\u003cli\u003eA flexible hinge design enables high and low angles\u003c\/li\u003e\n\u003cli\u003eThe included mid-level spreader provides additional stability while enabling individual leg adjustment on uneven or stepped surfaces\u003c\/li\u003e\n\u003cli\u003eDual-spiked feet tripod includes quick release rubber feet for delicate or slippery surfaces\u003c\/li\u003e\n\u003cli\u003eMagnetic locks snap the legs together for transport, but easily release for setup\u003c\/li\u003e\n\u003cli\u003eIncludes a carry handle for one-handed transportation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"l1div\"\u003e \u003c\/div\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cstrong\u003eSachtler ENG 2 Padded Bag\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eSachtler ENG 2 Padded Bag\u003c\/strong\u003e is a soft tripod bag designed to carry various Sachtler tripods with fluid heads up to 89 cm long. The case is made from water-resistant Cordura nylon and can be carried by the interlocking handles or the attached, adjustable shoulder strap.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler ENG 2 Padded Bag\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWater-resistant Cordura nylon\u003c\/li\u003e\n\u003cli\u003ePadded interior\u003c\/li\u003e\n\u003cli\u003eZipper closure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"gText\"\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eCarrying options\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInterlocking handles\u003c\/li\u003e\n\u003cli\u003eAttached, adjustable shoulder strap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eCompatible with\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSachtler DV 2, DV 4, DV 6 and DV 8 systems on ENG 75\/2 D tripod\u003c\/li\u003e\n\u003cli\u003eSachtler DV 8 with 100mm ball, DV 12, DV 15, Video 15, Video 18, Video 20 fluid heads on 2-fold extension or Speed Lock CF tripods\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - 260250\u003c\/li\u003e\n\u003cli\u003eGTIN - 029757004574\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sachtler Tripods","offers":[{"title":"Default Title","offer_id":47111670890681,"sku":"140473","price":12260.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/sachtler_aktiv10_flowtech_100_ms_tripod_system_01.jpg?v=1778109291"},{"product_id":"sachtler-aktiv6-flowtech75-gs-tripod-system","title":"Sachtler aktiv6 flowtech75 GS Tripod System","description":"\u003cp class=\"mText\"\u003eSachtler \u003cstrong class=\"h1Lit\"\u003e Sachtler aktiv6 flowtech75 GS Tripod System\u003c\/strong\u003e pairs the activ6 fluid head with the lightweight carbon fiber flowtech 75 GS tripod with a ground spreader. This kit offers lightning-fast SpeedSwap technology, a sideload camera plate, smooth panning and tilting, and stable support for camera rigs weighing up to 8 kg. A padded carrying bag rounds out this tripod kit.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler aktiv6 flowtech75 GS Tripod System\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eaktiv6 Sideload Fluid Head\u003c\/li\u003e\n\u003cli\u003eFlowtech75 Tripod\u003c\/li\u003e\n\u003cli\u003eGround Spreader, Carry Handle, Bag\u003c\/li\u003e\n\u003cli\u003eSpeedSwap Clamp-Style Base\u003c\/li\u003e\n\u003cli\u003eSpeedLevel Technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"l1div\"\u003e \u003c\/div\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cstrong\u003eSachtler aktiv6 Sideload Fluid Head with SpeedLevel \u0026amp; 3-Step Drag for Select Sachtler Tripods (75mm)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eSachtler aktiv6 Sideload Fluid Head\u003c\/strong\u003e truly innovative SpeedLevel technology to provide almost instant mounting and leveling of your camera rig on select Sachtler tripods. The clamp and stud SpeedLevel system saves precious time leveling your camera rig by eliminating the need to screw on a tie-down knob. Designed for DSLRs, mirrorless, and digital cine-style cameras, the aktiv6 supports rigs weighing up to 8 kg. This fluid head features 15 steps of counterbalance and three steps of pan and tilt drag adjustment, plus zero settings for both balance and drag.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe SpeedLevel technology replaces the traditional head screw and tie-down design with a strong clamp built into the head bowl and a stud component that clamps onto your tripod bowl or other mounting platform, such as a slider. Simply grasp the large lever on the head and pull it up to release the clamp, then press it down to lock your head in place. Partially lifting the lever allows you to quickly and easily level the head.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eWhen used with a separately available flowtech tripod, the activ6 enables you to spread the legs flat, getting as low to the ground as your head can without a tie-down knob getting in the way. You can also mount your head directly onto a slider using a separately available aktiv system stud that screws onto support systems with a 3\/8\"-16 threaded stud.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe PrismBubble level system is pressed once to illuminate the bubble level to be illuminated or pressed twice to light up both the bubble level and the drag settings, a boon when working in darker environments. The bubble level also has a built-in prism, enabling you to more easily level the head when the legs are at set at maximum height or an awkward angle.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eMount your camera using the aktiv6 sliding balance plate with 1\/4-20\" screw and locating pin. With a sliding range of 12 cm, this head adapts quickly to balance variously configured rigs. The Sachtler aktiv6 head also features a detachable pan bar that can be mounted onto the rosettes on either the right or left side of the head.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler aktiv6 Sideload Fluid Head with SpeedLevel \u0026amp; 3-Step Drag for Select Sachtler Tripods (75mm)\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e8 kg Capacity Fluid Drag Head\u003c\/li\u003e\n\u003cli\u003e75mm Half Ball\u003c\/li\u003e\n\u003cli\u003eSpeedSwap Clamp-Style Base\u003c\/li\u003e\n\u003cli\u003eSpeedLevel Technology\u003c\/li\u003e\n\u003cli\u003e15-Step + 0 Counterbalance\u003c\/li\u003e\n\u003cli\u003e3-Step + 0 Pan\/Tilt Drag\u003c\/li\u003e\n\u003cli\u003eEasy-View Illuminated PrismBubble\u003c\/li\u003e\n\u003cli\u003eSideload Plate with 23 cm Sliding Range\u003c\/li\u003e\n\u003cli\u003e+90° to -70° Tilt Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"gText\"\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eaktiv Fluid Head Compatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe aktiv6 and aktiv8 fluid heads are compatible with Sachtler 75mm tripods (flowtech 75 aktiv, Tripod 75\/2 AL, SpeedLock 75, ENG 75\/2 D, and DA 75L)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eSpeedLevel Technology\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eUse the large integrated lever to quickly mount, level, and lock the head on your tripod or other base; lift up to release, lift partially to level, and press down to lock the head firmly in place\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eSpeedSwap Base\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eCentered around a metal stud, the SpeedSwap base clamps onto any 75mm bowl tripod or to the separately available slider base; additional bases can be purchased separately to fit a second tripod, dolly, or slider\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003ePrismBubble Level\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe illuminated PrismBubble is visible from any height or angle, saving you time when leveling at higher or lower positions\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003e8 kg Capacity Fluid Head\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThis 8 kg capacity fluid head is suited for larger DSLRs, mirrorless MFT cameras, and for pro-style digital cine cameras\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eStepped Counterbalance and Drag\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e15 steps of counterbalance and three steps of pan and drag plus zero settings for free spins and tilts\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eSideload Plate\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe sideload plate has 12 cm of travel for balancing your rig and both a 1\/4\"-20 screw and a locating pin to prevent twisting\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"l1div\"\u003e \u003c\/div\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eSachtler flowtech 75 GS Carbon Fiber Tripod with Ground Spreader\u003c\/h2\u003e\n\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eSachtler flowtech 75 GS Carbon Fiber Tripod with Ground Spreader \u003c\/strong\u003eeschews the common single or double carbon fiber tube design and instead has redesigned the shape of the legs for improved torsional strength. The legs weigh just under 7 pounds yet they can support a payload of up to 20 kg and extend from a minimum height of 25 cm to a maximum height of 158 cm when using the included ground spreader. Each leg features a single clamping lever that locks and unlocks the sections.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eEach leg extends or retracts independently from the other two, and when it is detached from the spreader each leg can pivot without affecting the other legs. This is especially useful when working on rough or uneven terrain. You can remove the spreader completely and lock each leg in one of three positions, so you can work without a spreader if you wish. This enables you to spread the legs extremely wide for low shots, while the tripod legs maintain their torsional stability. The dual spikes at the end of each leg provide extra grip when working on softer ground without the spreader. An attachment point and carry handle are included.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler flowtech 75 GS Carbon Fiber Tripod with Ground Spreader\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDual-stage, carbon fiber, 75mm bowl tripod\u003c\/li\u003e\n\u003cli\u003eThe design and construction of the legs provide tremendous torsional stability. In other words, the legs resist twisting when you pan the tripod head.\u003c\/li\u003e\n\u003cli\u003eThe included ground spreader snaps easily onto the dual-spiked feet using a combination elastic and lever attachment system. The rubber feet are removable from the spreader and can be attached directly to the dual spiked feet of the legs for operation on hard\/delicate surfaces without the spreader.\u003c\/li\u003e\n\u003cli\u003eEach leg features a single clamping lever lock design at the top of the leg, near the 75mm bowl. This allows you to loosen all three leg sections from a single location, saving you time while reducing the wear and tear on your body as you don't have to bend down to loosen a leg lock at the bottom to lower or raise the legs.\u003c\/li\u003e\n\u003cli\u003eThe legs incorporate a locking mechanism that enables the legs to move completely freely, suitable when working with a spreader, or to lock at one of three angles, suitable for use when working without a spreader.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"l1div\"\u003e \u003c\/div\u003e\n\u003ch2 class=\"h2Lit\"\u003eSachtler Padded Bag for flowtech 75 or TT Tripod with FSB Fluid Head\u003c\/h2\u003e\n\u003cp class=\"mText\"\u003eWith dimensions of 93 x 20 x 23 cm \u003cstrong class=\"h1Lit\"\u003eSachtler Padded Bag \u003c\/strong\u003e is designed specifically for carrying a flowtech 75 or TT tripod equipped with an FSB fluid head. It is made with a high-density 900D fabric, which is both flame retardant and water-resistant to help ensure that your equipment stays safe. Additionally, layers of both open-cell and closed-cell foam are used in the construction to protect your gear against small bumps and shocks.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe bag opens via a full-length zipper found at the top, which allows for easy access while shooting. For transport, two straps on each side can be connected to an integrated handgrip for easy carrying. There are also small handles on each side of the bag where the zipper ends, and right next to them are D-rings that can be used to connect an optional shoulder strap. Finally, a clear plastic window on the outside allows you to insert a tag with your name or phone number for easy identification when travelling.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler Padded Bag for flowtech 75 or TT Tripod with FSB Fluid Head\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePadded bag with dimensions of 93 x 20 x 23 cm , designed for carrying a flowtech 75 or TT tripod with an FSB fluid head\u003c\/li\u003e\n\u003cli\u003e900D water-resistant fabric on the exterior, with layers of foam to help cushion gear against bumps\u003c\/li\u003e\n\u003cli\u003eFull-length zipper allows for easy access to the interior compartment\u003c\/li\u003e\n\u003cli\u003eConnecting hand straps, side handles, and D-rings available for transport\u003c\/li\u003e\n\u003cli\u003eClear plastic window on one of the sides allows you to insert a name tag for easy identification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - ST-S2064S-FTGS\u003c\/li\u003e\n\u003cli\u003eGTIN - 5060520687308\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sachtler Tripods","offers":[{"title":"Default Title","offer_id":47111671742649,"sku":"140462","price":6585.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/sachtler_aktiv6_flowtech75_gs_tripod_system_01.jpg?v=1778109294"},{"product_id":"sachtler-aktiv8-sideload-fluid-head-with-speedlevel-for-select-75mm-sachtler-tripods","title":"Sachtler aktiv8 Sideload Fluid Head with SpeedLevel for Select 75mm Sachtler Tripods","description":"\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eSachtler aktiv8 Sideload Fluid Head\u003c\/strong\u003e uses Sachtler's truly innovative SpeedLevel technology to provide almost instant mounting and leveling of your camera rig on your tripod. The clamp and stud SpeedLevel system saves precious time leveling your camera rig by eliminating the need to screw on a tie-down knob.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eMount your camera using the included Sideload Plate S that has both a 1\/4-20 camera screw and a locating pin to prevent twisting. With a sliding range of 120 mm, this head balances quickly to accommodate variously configured rigs The Sachtler aktiv8 head also features a detachable pan bar that can be mounted onto the rosettes on either the right or left side of the head\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler aktiv8 Sideload Fluid Head with SpeedLevel for Select 75mm Sachtler Tripods\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLevel and lock your head in an instant with the unique SpeedLevel™ technology\u003c\/li\u003e\n\u003cli\u003eCapture extreme low-angle shots right down to the ground with the innovative streamlined mounting system\u003c\/li\u003e\n\u003cli\u003eSwitch between tripod and slider in seconds with the revolutionary SpeedSwap™ system\u003c\/li\u003e\n\u003cli\u003eIlluminated PrismBubble visible from any height or angle\u003c\/li\u003e\n\u003cli\u003eWide payload range for camera setups with different configurations\u003c\/li\u003e\n\u003cli\u003e7 step drag mechanism for final drag adjustment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cdiv class=\"gText\"\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eaktiv Fluid Head Compatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe aktiv6 and aktiv8 fluid heads are compatible with Sachtler 75mm tripods (flowtech 75 aktiv, Tripod 75\/2 AL, SpeedLock 75, ENG 75\/2 D, and DA 75L)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eSpeedLevel Technology\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eUse the large integrated lever to quickly mount, level, and lock the head on your tripod or other base; lift up to release, lift partially to level, and press down to lock the head firmly in place\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eSpeedSwap Base\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eCentered around a metal stud, the SpeedSwap base clamps onto any 75mm bowl tripod or to the separately available slider base; additional bases can be purchased separately to fit a second tripod, dolly, or slider\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003ePrismBubble Level\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe illuminated PrismBubble is visible from any height or angle, saving you time when leveling at higher or lower positions\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003e12 kg Capacity Fluid Head\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThis 26.5 lb capacity fluid head is suited for larger DSLRs, mirrorless MFT cameras, and pro-style digital cine cameras\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eStepped Counterbalance and Drag\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e15 steps of counterbalance and seven steps of pan and drag plus zero settings for free spins and tilts\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eSideload Plate\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe sideload plate has 120 mm of slide range for balancing your rig and both 1\/4\"-20 and 3\/8\"-16 camera screws\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - ST-S2068S\u003c\/li\u003e\n\u003cli\u003eGTIN - 5060520688398\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sachtler Tripods","offers":[{"title":"Default Title","offer_id":47111671840953,"sku":"140464","price":4665.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/sachtler_aktiv8_sideload_fluid_head_with_speedlevel-01.jpg?v=1778109292"},{"product_id":"sachtler-aktiv10-flowtech-100-gs-tripod-system","title":"Sachtler aktiv10 flowtech 100 GS Tripod System","description":"\u003cdiv data-content-type=\"html\" data-appearance=\"default\" data-element=\"main\"\u003e\n\u003cstyle\u003e\u003c!--\nh2.h2Lit {padding-block-start: 0.6rem;margin-block-end: 0.5rem;}\n        .gText h2, .gText3 h2, .gText4 h2, .gText5 h2 {line-height:0.7;}\n        h2.lh1 {line-height: 1;}\n        h3.uLit {padding-top: 1rem; margin-bottom: -0.2rem;}\n        span.h2Lit, .h1Lit {color: #ff6600; font-weight: bold;}\n        .h1Lit {font-size: large;}\n        span.h2Lit, p.mText, blockquote.descQ {font-size: medium;}\n        blockquote.descQ footer {font-size: small; }\n        blockquote.descQ {background-color: rgb(237, 237, 237); padding: 0.5rem; width: 80%;}\n        blockquote.descQ p{padding: 0.5rem 0.5rem 0 0.5rem;}\n        Ul.mpn {color: #888888;}\n        span.ind{padding-left: 1rem;}\n        table.descTable tr {vertical-align: top;}\n        table.descTable th, table.descTable td {width: 50%; text-align: left; padding: 0 1rem 0 1rem;}\n        table.descTable th {padding-top:1.5rem;}\n        table.bTable {width: auto;}\n        table.bTable th {text-align: left; padding-top:1rem; padding-bottom: 1rem; width: auto; font-size: 1vw;}\n            .bDs {padding:0.5rem; box-shadow: 0rem 0.2rem 0.5rem  rgba(0,0,0,0.6); border-radius:0.5rem; border}\n            @media only screen and (min-width:200px) and (max-width:1000px) {\n                table.bTable th {font-size:3vw;}\n            }\n        .gText div, .gText3 div, .gText4 div, .gText5 div {padding:1rem;}\n        .gText {display:grid; grid-template-columns: repeat(auto-fill,minmax(50%, 1fr));}\n        .gText3 {display:grid; grid-template-columns: repeat(auto-fill,minmax(33.33%, 1fr));}\n        .gText4 {display:grid; grid-template-columns: repeat(auto-fill,minmax(25%, 1fr));}\n        .gText5 {display:grid; grid-template-columns: repeat(auto-fill,minmax(20%, 1fr));}\n                @media only screen and (min-width:200px) and (max-width:1000px) {\n                        .gText, .gText3, .gText4, .gText5 {display:grid; grid-template-columns: repeat(auto-fill,minmax(100%, 1fr));}\n            }\n        .bDs1 {width:fit-content; box-shadow: 0rem 0.2rem 0.5rem  rgba(0,0,0,0.6); border-radius:0.5rem; border}\n        .iDs1 {padding: 0.7rem;}\n        .l1div {border-bottom: 0.1rem solid #000;}\n        .dBor {padding:1rem;border:0.1rem solid #000;}\n            .dMobile {border-top: solid .3rem #000; border-radius: 1rem; box-shadow: #000 0.1rem 0.1rem 0.3rem;}\n            .dMobi {padding-left: 1rem; padding-right: 1rem;}\n            u.h1Lit {font-size: large;}\n        .aquaList li {padding-top: 0.5rem;}\n        .aquaList li::first-line {font-weight: bolder;}\n--\u003e\u003c\/style\u003e\n\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eSachtler aktiv10 flowtech 100 GS Tripod System\u003c\/strong\u003e pairs the activ10 fluid head with the lightweight, carbon fiber flowtech 100 GS tripod with ground spreader. This kit offers lightning fast SpeedSwap technology, a sideload camera plate, 15 levels (+0) of counterbalance, 7 levels (+0) of pan and tilt drag, and stable support for camera rigs weighing up to 12 kg. A padded carrying bag rounds out this tripod kit.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler aktiv10 flowtech 100 GS Tripod System\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAktiv10 Sideload Fluid Head\u003c\/li\u003e\n\u003cli\u003eSpeedSwap Clamp-Style Base\u003c\/li\u003e\n\u003cli\u003eflowtech 100 Tripod\/Ground Spreader\/Bag\u003c\/li\u003e\n\u003cli\u003eSpeedLevel Technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"l1div\"\u003e \u003c\/div\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cstrong\u003eSachtler aktiv10 Sideload Fluid Head with SpeedLevel \u0026amp; 7-Step Drag for Select Sachtler Tripods ((100mm Ball)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eSachtler aktiv10 Sideload Fluid Head \u003c\/strong\u003euses truly innovative SpeedLevel technology to provide almost instant mounting and leveling of your camera rig on select Sachtler tripods. The clamp and stud SpeedLevel system saves precious time leveling your camera rig by eliminating the need to screw on a tie-down knob. Designed for documentary, news, and corporate production, the aktiv10 supports camera rigs weighing up to 12 kg. This 100mm ball fluid head also features 15 steps of counterbalance, seven steps of pan and tilt drag, and zero settings for both balance and drag.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe proprietary Sachtler SpeedLevel technology replaces the traditional head screw and tie-down design with a strong clamp built into the head bowl and a stud component that clamps onto your tripod bowl or other mounting platform, such as a slider. Simply grasp the large lever on the head and pull it up to release the clamp, then press it down to lock your head in place. Partially lifting the lever allows you to quickly and easily level the head.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eWhen used with a separately available flowtech tripod, the aktiv10 enables you to spread the legs flat for extremely low shots without a tie-down knob getting in the way. You can also mount your head directly onto a slider using a separately available aktiv system stud that screws onto support systems with a 3\/8\"-16 threaded stud.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe active 10's PrismBubble is a built-in prism level with two viewing windows that enable you to more easily level the head when the legs are at set at maximum height or at an awkward angle. The bubble level also has two levels of illumination—press once to light up the bubble level or hold longer to illuminate both the bubble level and the counterbalance and drag settings, a boon when working in darker environments.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eMount your camera using the included Sideload Plate S that has both a 1\/4-20 camera screw and a locating pin to prevent twisting. With a sliding range of 12 cm, this head balances quickly to accommodate variously configured rigs. The Sachtler aktiv10 head also features a detachable pan bar that can be mounted onto the rosettes on either the right or left side of the head.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler aktiv10 Sideload Fluid Head with SpeedLevel \u0026amp; 7-Step Drag for Select Sachtler Tripods ((100mm Ball)\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e12 kg Capacity Fluid Drag Head\u003c\/li\u003e\n\u003cli\u003e100mm Half Ball\u003c\/li\u003e\n\u003cli\u003eSpeedSwap Clamp-Style Base\u003c\/li\u003e\n\u003cli\u003eSpeedLevel Technology\u003c\/li\u003e\n\u003cli\u003eSideload Plate with 12 cm Sliding Range\u003c\/li\u003e\n\u003cli\u003e15-Step + 0 Counterbalance\u003c\/li\u003e\n\u003cli\u003e7-Step + 0 Pan\/Tilt Drag\u003c\/li\u003e\n\u003cli\u003eIlluminated Prism Bubble Adds Visibility\u003c\/li\u003e\n\u003cli\u003e+90° to -70° Tilt Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"gText\"\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eaktiv Fluid Head Compatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe aktiv10 is compatible with Sachtler 100mm tripods (flowtech 100, ENG 2 CF, ENG 2D, ENG 2 CF HD, SpeedLock, and SpeedLock CF HD)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eSpeedLevel Technology\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eUse the large integrated lever to quickly mount, level, and lock the head on your tripod or other base; lift up to release, lift partially to level, and press down to lock the head firmly in place\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eSpeedSwap Base\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eCentered around a metal stud, the SpeedSwap base clamps onto any 100mm bowl tripod or the separately available slider base; additional bases can be purchased separately to fit a second tripod, dolly, or slider\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003ePrismBubble Level\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe illuminated PrismBubble is visible from any height or angle, saving you time when leveling at higher or lower positions\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003e12 kg Capacity Fluid Head\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThis 12 kg capacity fluid head is suited for pro-style digital cine cameras and larger DSLR and mirrorless camera rigs\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eStepped Counterbalance and Drag\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eFifteen steps of counterbalance and seven steps of pan and drag plus zero settings, for free spins and tilts\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eSideload Plate S\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Sideload Plate S has 12 cm of travel for balancing your rig and both a 1\/4\"-20 camera screw and a locating pin\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"l1div\"\u003e \u003c\/div\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cstrong\u003eSachtler flowtech 100 mm Carbon Fiber Tripod (Ground Spreader)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eSachtler flowtech 100 Carbon Fiber Tripod with Ground Spreader\u003c\/strong\u003e eschews the common single or double carbon fiber tube design; instead it has redesigned the shape of the legs for improved torsional strength. The legs weigh 4 kg, yet they can support a payload of up to 30 kg, and extend from a minimum height of 43 cm to a maximum height of 160 cm when using the included removable ground spreader. Each leg features a single clamping lever that locks and unlocks the sections.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eEach leg extends or retracts independently from the other two, and when it is detached from the spreader each leg can pivot without affecting the other legs. This is especially useful when working on rough or uneven terrain. You can remove the spreader completely and lock each leg in one of three positions, so you can work without a spreader if you wish. This enables you to spread the legs extremely wide for low shots while the tripod legs maintain their torsional stability. The dual spikes at the end of each leg provide extra grip when working on softer ground.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler flowtech 100 mm Carbon Fiber Tripod (Ground Spreader)\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDual-stage, carbon fiber, 100mm bowl tripod.\u003c\/li\u003e\n\u003cli\u003eThree 3\/8\"-16 accessory mounting holes are integrated into the outside of the 100mm bowl.\u003c\/li\u003e\n\u003cli\u003eThe legs by themselves weigh only 4 kg but support up to 30 kg.\u003c\/li\u003e\n\u003cli\u003eThe design and construction of the legs provide tremendous torsional stability. In other words, the legs resist twisting when you pan the tripod head.\u003c\/li\u003e\n\u003cli\u003eEach leg features a single clamping lever lock design at the top of the leg, near the 100mm bowl. This allows you to loosen all three leg sections from a single location, saving you time while reducing the wear and tear on your body as you don't have to bend down to loosen a lock at the bottom to lower or raise the legs.\u003c\/li\u003e\n\u003cli\u003eThe legs incorporate a locking mechanism that enables the legs to move freely for working with a spreader, or to lock at one of three angles when working without a spreader.\u003c\/li\u003e\n\u003cli\u003eWith the spreader, the height range is 43 to 159 cm. However, if you remove the ground spreader and utilize the built-in locking mechanism, the usable height range is 26 to 153 cm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"l1div\"\u003e \u003c\/div\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cstrong\u003eSachtler ENG 2 Padded Bag\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eSachtler ENG 2 Padded Bag\u003c\/strong\u003e is a soft tripod bag designed to carry various Sachtler tripods with fluid heads up to 35\" long. The case is made from water-resistant Cordura nylon and can be carried by the interlocking handles or the attached, adjustable shoulder strap.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler ENG 2 Padded Bag\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWater-resistant Cordura nylon\u003c\/li\u003e\n\u003cli\u003ePadded interior\u003c\/li\u003e\n\u003cli\u003eZipper closure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"gText\"\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eCarrying options\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInterlocking handles\u003c\/li\u003e\n\u003cli\u003eAttached, adjustable shoulder strap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eCompatible with\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSachtler DV 2, DV 4, DV 6 and DV 8 systems on ENG 75\/2 D tripod\u003c\/li\u003e\n\u003cli\u003eSachtler DV 8 with 100mm ball, DV 12, DV 15, Video 15, Video 18, Video 20 fluid heads on 2-fold extension or Speed Lock CF tripods\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - ST-S2072S-FTGS\u003c\/li\u003e\n\u003cli\u003eGTIN - 506052068828\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sachtler Tripods","offers":[{"title":"Default Title","offer_id":47111671939257,"sku":"140472","price":11390.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/sachtler_aktiv10_flowtech_100_gs_tripod_system_01.jpg?v=1778109296"},{"product_id":"sachtler-aktiv8-flowtech75-gs-tripod-system","title":"Sachtler aktiv8 flowtech75 GS Tripod System","description":"\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003e Sachtler aktiv8 flowtech75 GS Tripod System\u003c\/strong\u003e pairs the activ8 fluid head with the lightweight, carbon fibre flowtech 75 GS tripod with a ground spreader. This kit offers lightning-fast SpeedSwap technology, a sideload camera plate, 15 levels (+0) of counterbalance, 7 levels (+0) of pan and tilt drag, and stable support for the camera rigs weighing up to 26.5 lb. A padded carrying bag rounds out this tripod kit.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler aktiv8 flowtech75 GS Tripod System\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eaktiv8 Sideload Fluid Head\u003c\/li\u003e\n\u003cli\u003eflowtech75 Tripod\u003c\/li\u003e\n\u003cli\u003eGround Spreader, Carry Handle, Bag\u003c\/li\u003e\n\u003cli\u003eSpeedSwap Clamp-Style Base\u003c\/li\u003e\n\u003cli\u003eSpeedLevel Technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"l1div\"\u003e \u003c\/div\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cstrong\u003eSachtler aktiv8 Sideload Fluid Head with SpeedLevel \u0026amp; 7-Step Drag for Select Sachtler Tripods (75mm)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eSachtler' aktiv8 Sideload Fluid Head\u003c\/strong\u003e uses s truly innovative SpeedLevel technology to provide almost instant mounting and levelling of your camera rig on select Sachtler tripods The clamp and stud SpeedLevel system saves precious time levelling your camera rig by eliminating the need to screw on a tie-down knob. Designed for documentary, news, and corporate productions, the aktiv8 supports rigs weighing up to 12 kg. This 75mm ball fluid head features 15 steps of counterbalance and seven steps of pan and tilt drag adjustment, plus zero settings for both balance and drag.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe SpeedLevel technology replaces the traditional head screw and tie-down design with a strong clamp built into the head bowl and a stud component that clamps onto your tripod bowl or another mounting platform, such as a slider. Simply grasp the large lever on the head and pull it up to release the clamp, then press it down to lock your head in place. Partially lifting the lever allows you to quickly and easily level the head.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eWhen used with a separately available flowtech tripod, the aktiv8 enables you to spread the legs flat, getting as low to the ground as your head can without a tie-down knob getting in the way. You can also now mount your head directly onto a slider using a separately available Aktiv system stud that screws onto support systems with a 3\/8\"-16 threaded stud.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe PrismBubble level system is pressed once to illuminate the bubble level to be illuminated or pressed twice to light up both the bubble level and the drag settings, a boon when working in darker environments. The bubble level also has a built-in prism, enabling you to more easily level the head when the legs are set at maximum height or an awkward angle.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eMount your camera using the included Sideload Plate S that has both a 1\/4-20 camera screw and a locating pin to prevent twisting. With a sliding range of 12 cm, this head balances quickly to accommodate variously configured rigs The Sachtler aktiv8 head also features a detachable pan bar that can be mounted onto the rosettes on either the right or left side of the head.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler' aktiv8 Sideload Fluid Head\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e12 kg Capacity Fluid Drag Head\u003c\/li\u003e\n\u003cli\u003e75mm Half Ball\u003c\/li\u003e\n\u003cli\u003eSpeedSwap Clamp-Style Base\u003c\/li\u003e\n\u003cli\u003eSpeedLevel Technology\u003c\/li\u003e\n\u003cli\u003eSideload Plate with 12 cm Sliding Range\u003c\/li\u003e\n\u003cli\u003e15-Step + 0 Counterbalance\u003c\/li\u003e\n\u003cli\u003e7-Step + 0 Pan\/Tilt Drag\u003c\/li\u003e\n\u003cli\u003eIlluminated Prism Bubble Adds Visibility\u003c\/li\u003e\n\u003cli\u003e+90° to -70° Tilt Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"gText\"\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h1Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eaktiv Fluid Head Compatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe aktiv6 and aktiv8 fluid heads are compatible with Sachtler 75mm tripods (flowtech 75 aktiv, Tripod 75\/2 AL, SpeedLock 75, ENG 75\/2 D, and DA 75L)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h1Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eSpeedLevel Technology\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eUse the large integrated lever to quickly mount, level, and lock the head on your tripod or another base; lift to release, lift partially to level, and press down to lock the head firmly in place\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h1Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eSpeedSwap Base\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eCentred around a metal stud, the SpeedSwap base clamps onto any 75mm bowl tripod or to the separately available slider base; additional bases can be purchased separately to fit a second tripod, dolly, or slider\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h1Lit\"\u003e\u003cspan class=\"h2Lit\"\u003ePrismBubble Level\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe illuminated PrismBubble is visible from any height or angle, saving you time when levelling at higher or lower positions\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h1Lit\"\u003e\u003cspan class=\"h2Lit\"\u003e12 kg  Capacity Fluid Head\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThis 12 kg capacity fluid head is suited for larger DSLRs, mirrorless MFT cameras, and pro-style digital cine cameras\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h1Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eStepped Counterbalance and Drag\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e15 steps of counterbalance and seven steps of pan and drag plus zero settings for free spins and tilts\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h1Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eSideload Plate\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe sideload plate has 12 cm of travel for balancing your rig and both 1\/4\"-20 and 3\/8\"-16 camera screws\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"l1div\"\u003e \u003c\/div\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cstrong\u003eSachtler flowtech 75 GS Carbon Fiber Tripod with Ground Spreader\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eSachtler flowtech 75 GS Carbon Fiber Tripod with Ground Spreader\u003c\/strong\u003eeschews the common single or double carbon fibre tube design and instead has redesigned the shape of the legs for improved torsional strength. The legs weigh just under 3 kg yet they can support a payload of up to 20 kg and extend from a minimum height of 25 cm to a maximum height of 158 cm when using the included ground spreader. Each leg features a single clamping lever that locks and unlocks the sections.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eEach leg extends or retracts independently from the other two, and when it is detached from the spreader each leg can pivot without affecting the other legs. This is especially useful when working on rough or uneven terrain. You can remove the spreader completely and lock each leg in one of three positions, so you can work without a spreader if you wish. This enables you to spread the legs extremely wide for low shots, while the tripod legs maintain their torsional stability. The dual spikes at the end of each leg provide extra grip when working on the softer ground without the spreader. An attachment point and carry handle are included.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler flowtech 75 GS Carbon Fiber Tripod with Ground Spreader\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDual-stage, carbon fibre, 75mm bowl tripod\u003c\/li\u003e\n\u003cli\u003eThe design and construction of the legs provide tremendous torsional stability. In other words, the legs resist twisting when you pan the tripod head.\u003c\/li\u003e\n\u003cli\u003eThe included ground spreader snaps easily onto the dual-spiked feet using a combination elastic and lever attachment system. The rubber feet are removable from the spreader and can be attached directly to the dual spiked feet of the legs for operation on hard\/delicate surfaces without the spreader.\u003c\/li\u003e\n\u003cli\u003eEach leg features a single clamping lever lock design at the top of the leg, near the 75mm bowl. This allows you to loosen all three leg sections from a single location, saving you time while reducing the wear and tear on your body as you don't have to bend down to loosen a leg lock at the bottom to lower or raise the legs.\u003c\/li\u003e\n\u003cli\u003eThe legs incorporate a locking mechanism that enables the legs to move completely freely, suitable when working with a spreader, or to lock at one of three angles, suitable for use when working without a spreader.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"l1div\"\u003e \u003c\/div\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cstrong\u003eSachtler Padded Bag for flowtech 75 or TT Tripod with FSB Fluid Head\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"mText\"\u003eWith dimensions of 93 x 20 x 23 cm, this \u003cstrong class=\"h1Lit\"\u003eSachtler Padded Bag \u003c\/strong\u003eis designed specifically for carrying a flowtech 75 or TT tripod equipped with an FSB fluid head. It is made with a high-density 900D fabric, which is both flame retardant and water-resistant to help ensure that your equipment stays safe. Additionally, layers of both open-cell and closed-cell foam are used in the construction to protect your gear against small bumps and shocks.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe bag opens via a full-length zipper found at the top, which allows for easy access while shooting. For transport, two straps on each side can be connected to an integrated handgrip for easy carrying. There are also small handles on each side of the bag where the zipper ends, and right next to them are D-rings that can be used to connect an optional shoulder strap. Finally, a clear plastic window on the outside allows you to insert a tag with your name or phone number for easy identification when travelling.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler Padded Bag for flowtech 75 or TT Tripod with FSB Fluid Head\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePadded bag with dimensions of 93 x 20 x 23 cm, designed for carrying a flowtech 75 or TT tripod with an FSB fluid head\u003c\/li\u003e\n\u003cli\u003e900D water-resistant fabric on the exterior, with layers of foam to help cushion gear against bumps\u003c\/li\u003e\n\u003cli\u003eA full-length zipper allows for easy access to the interior compartment\u003c\/li\u003e\n\u003cli\u003eConnecting hand straps, side handles, and D-rings available for transport\u003c\/li\u003e\n\u003cli\u003eA clear plastic window on one of the sides allows you to insert a name tag for easy identification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - ST-S2068S-FTGS\u003c\/li\u003e\n\u003cli\u003eGTIN - 5060520687322\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sachtler Tripods","offers":[{"title":"Default Title","offer_id":47111671972025,"sku":"140465","price":7920.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/st-s2068s-ftgs_01.jpg?v=1778109296"},{"product_id":"sachtler-aktiv8t-flowtech75-ms-tripod-system","title":"Sachtler aktiv8T flowtech75 MS Tripod System","description":"\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eSachtler aktiv8T flowtech75 MS Tripod System\u003c\/strong\u003e pairs the activ8T fluid head with the lightweight, carbon fibre flowtech 75 GS tripod with a mid-level spreader. This kit offers lightning-fast SpeedSwap technology, a Touch \u0026amp; Go camera plate, 15 levels (+0) of counterbalance, 7 levels (+0) of pan and tilt drag, and stable support for the camera rigs weighing up to 12 kg. A padded carrying bag rounds out this tripod kit.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler aktiv8T flowtech75 MS Tripod System\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eaktiv8T Touch \u0026amp; Go Fluid Head\u003c\/li\u003e\n\u003cli\u003eflowtech75 Tripod\u003c\/li\u003e\n\u003cli\u003eMid-Level Spreader, Carry Handle, Bag\u003c\/li\u003e\n\u003cli\u003eSpeedSwap Clamp-Style Base\u003c\/li\u003e\n\u003cli\u003eSpeedLevel Technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"l1div\"\u003e \u003c\/div\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cstrong\u003eSachtler aktiv8T Touch \u0026amp; Go Fluid Head with SpeedLevel \u0026amp; 7-Step Drag for Select Sachtler Tripods (75mm)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003e Sachtler aktiv8T Sideload Fluid Head\u003c\/strong\u003e truly innovative SpeedLevel technology to provide almost instant mounting and levelling of your camera rig on select Sachtler tripods. The clamp and stud SpeedLevel system saves precious time levelling your camera rig by eliminating the need to screw on a tie-down knob. Designed for larger DSLRs, mirrorless, and digital cine-style cameras, the aktiv8T supports rigs weighing up to 12 kg. This fluid head features 15 steps of counterbalance and seven steps of pan and tilt drag adjustment, plus zero settings for both balance and drag.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe SpeedLevel technology replaces the traditional head screw and tie-down design with a strong clamp built into the head bowl and a stud component that clamps onto your tripod bowl or another mounting platform, such as a slider. Simply grasp the large lever on the head and pull it up to release the clamp, then press it down to lock your head in place. Partially lifting the lever allows you to quickly and easily level the head.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eWhen used with a separately available flowtech tripod, the activ8T enables you to spread the legs flat, getting as low to the ground as your head can without a tie-down knob getting in the way. You can also now mount your head directly onto a slider using a separately available Aktiv system stud that screws onto support systems with a 3\/8\"-16 threaded stud.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe PrismBubble level system is pressed once to illuminate the bubble level to be illuminated or pressed twice to light up both the bubble and drag settings, a boon when working in darker environments. The bubble level also has a built-in prism, enabling you to more easily level the head when the legs are set at maximum height or an awkward angle.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eMount your camera using the aktiv8T Touch \u0026amp; Go plate with both 1\/4-20\" and 3\/8\"-16 camera screws. A sliding range of 12 cm helps the head to quickly balance variously configured rigs. The Sachtler aktiv8T head also features a detachable pan bar that can be mounted onto the rosettes on either the right or left side of the head.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler aktiv8T Touch \u0026amp; Go Fluid Head with SpeedLevel \u0026amp; 7-Step Drag for Select Sachtler Tripods (75mm)\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e12 kg Capacity Fluid Drag Head\u003c\/li\u003e\n\u003cli\u003e75mm Half Ball\u003c\/li\u003e\n\u003cli\u003eSpeedSwap Clamp-Style Base\u003c\/li\u003e\n\u003cli\u003eSpeedLevel Technology\u003c\/li\u003e\n\u003cli\u003eTouch \u0026amp; Go Plate with 12 cm Sliding Range\u003c\/li\u003e\n\u003cli\u003e15-Step + 0 Counterbalance\u003c\/li\u003e\n\u003cli\u003e7-Step + 0 Pan\/Tilt Drag\u003c\/li\u003e\n\u003cli\u003eIlluminated Prism Bubble Adds Visibility\u003c\/li\u003e\n\u003cli\u003e+90° to -70° Tilt Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"gText\"\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eaktiv Fluid Head Compatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe aktiv6 and aktiv8 fluid heads are compatible with Sachtler 75mm tripods (flowtech 75 aktiv, Tripod 75\/2 AL, SpeedLock 75, ENG 75\/2 D, DA 75L)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eSpeedLevel Technology\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eUse the large integrated lever to quickly mount, level, and lock the head on your tripod or another base; lift to release, lift partially to level, and press down to lock the head firmly in place\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eSpeedSwap Base\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eCentred around a metal stud, the SpeedSwap base clamps onto any 75mm bowl tripod or to the separately available slider base; additional bases can be purchased separately to fit a second tripod, dolly, or slider\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003ePrismBubble Level\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe illuminated PrismBubble is visible from any height or angle, saving you time when levelling at higher or lower positions\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003e12 kg Capacity Fluid Head\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThis 12 kg capacity fluid head is suited for larger DSLRs, mirrorless MFT cameras, and pro-style digital cine cameras\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eStepped Counterbalance and Drag\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e15 steps of counterbalance and seven steps of pan and drag plus zero settings for free spins and tilts\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eSideload Plate S\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Touch \u0026amp; Go platform provides quick camera mounting with 7 cm of travel for balancing your rig and both 1\/4\"-20 and 3\/8\"-16 camera screws\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"l1div\"\u003e \u003c\/div\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cstrong\u003eSachtler flowtech75 MS Carbon Fiber Tripod with Mid-Level Spreader \u0026amp; Rubber Feet\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"mText\"\u003eThe lightweight \u003cstrong class=\"h1Lit\"\u003eSachtler flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader\u003c\/strong\u003e eschews the common single or double carbon fibre tube design and has redesigned the legs' shape for improved torsional strength. The legs work weigh just under 3 kg yet they can support a payload of up to 20 kg, and extend from a minimum height of 61 cm to a maximum height of 155 cm when using the included removable mid-level spreader. Each leg features a single clamping lever that locks and unlocks the sections.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eEach leg extends or retracts independently from the other two, and when it is detached from the spreader each leg can pivot without affecting the other legs. This is especially useful when working on rough or uneven terrain. You can remove the spreader completely and lock each leg in one of three positions, so you can work without a spreader if you wish. This enables you to spread the legs extremely wide for low shots, while the tripod legs maintain their torsional stability. The dual spikes at the end of each leg provide extra grip when working on softer ground, and you can snap rubber feet onto the dual spikes for better grip when working on hard or delicate surfaces.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler flowtech 100 MS Carbon Fiber Tripod with Mid-Level Spreader \u0026amp; Rubber Feet\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDual-stage, carbon fibre, 75mm bowl tripod\u003c\/li\u003e\n\u003cli\u003eWeighs only 3 kg but supports up to 20 kg\u003c\/li\u003e\n\u003cli\u003eThe design and construction of the legs provide tremendous torsional stability. In other words, the legs resist twisting when you pan the tripod head.\u003c\/li\u003e\n\u003cli\u003eThe included mid-level spreader allows you to work on uneven terrains such as stairs or rocks while preventing the legs from flying apart. When using the mid-level spreader, you can use the included rubber feet to protect delicate surfaces from the tripod's foot spikes.\u003c\/li\u003e\n\u003cli\u003eEach leg features a single clamping lever lock design at the top of the leg, near the 75mm bowl. This allows you to loosen all three leg sections from a single location, saving you time while reducing the wear and tear on your body as you don't have to bend down to loosen a leg lock at the bottom to lower or raise the legs.\u003c\/li\u003e\n\u003cli\u003eThe legs incorporate a locking mechanism that enables the legs to move completely freely, suitable when working with a spreader, or to lock at one of three angles, suitable for use when working without a spreader.\u003c\/li\u003e\n\u003cli\u003eThere is room for the mid-level spreader to be folded up while remaining attached when closing the legs. The legs feature a magnetic locking system strong enough to hold them together during transport but allow you to easily release the legs when you want to set them up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"l1div\"\u003e \u003c\/div\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cstrong\u003eSachtler Padded Bag for flowtech 75 or TT Tripod with FSB Fluid Head\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"mText\"\u003eThe dimensions of 93 x 20 x 23 cm \u003cstrong class=\"h1Lit\"\u003eSachtler ENG 2 Padded Bag \u003c\/strong\u003eare designed specifically to carry a flowtech 75 or TT tripod equipped with an FSB fluid head. It is made with a high-density 900D fabric, which is both flame retardant and water-resistant to help ensure that your equipment stays safe. Additionally, both open-cell and closed-cell foam layers are used in the construction to protect your gear against small bumps and shocks.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe bag opens via a full-length zipper found at the top, which allows for easy access while shooting. For transport, two straps on each side can be connected to an integrated handgrip for easy carrying. There are also small handles on each side of the bag where the zipper ends, and right next to them are D-rings that can be used to connect an optional shoulder strap. Finally, a clear plastic window on the outside allows you to insert a tag with your name or phone number for easy identification when travelling. \u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler ENG 2 Padded Bag\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePadded bag with dimensions of 93 x 20 x 23 cm, designed for carrying a flowtech 75 or TT tripod with an FSB fluid head\u003c\/li\u003e\n\u003cli\u003e900D water-resistant fabric on the exterior, with layers of foam to help cushion gear against bumps\u003c\/li\u003e\n\u003cli\u003eA full-length zipper allows for easy access to the interior compartment\u003c\/li\u003e\n\u003cli\u003eConnecting hand straps, side handles, and D-rings available for transport\u003c\/li\u003e\n\u003cli\u003eA clear plastic window on one of the sides allows you to insert a name tag for easy identification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - ST-S2068T-FTMS\u003c\/li\u003e\n\u003cli\u003eGTIN - 029757004574\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sachtler Tripods","offers":[{"title":"Default Title","offer_id":47111672332473,"sku":"140469","price":7775.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/sachtler_aktiv8t_flowtech75_ms_tripod_system_01.jpg?v=1778109296"},{"product_id":"sachtler-aktiv8t-flowtech75-gs-tripod-system","title":"Sachtler aktiv8T flowtech75 GS Tripod System","description":"\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eSachtler aktiv8T flowtech75 GS Tripod System\u003c\/strong\u003e pairs the activ8T fluid head with the lightweight, carbon fiber flowtech 75 GS tripod with a ground spreader. This kit offers lightning fast SpeedSwap technology, a Touch \u0026amp; Go camera plate, 15 levels (+0) of counterbalance, 7 levels (+0) of pan and tilt drag, and stable support for camera rigs weighing up to 12 kg. A padded carrying bag rounds out this tripod kit.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler aktiv8T flowtech75 GS Tripod System\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eaktiv8T Touch \u0026amp; Go Fluid Head\u003c\/li\u003e\n\u003cli\u003eflowtech75 Tripod\u003c\/li\u003e\n\u003cli\u003eGround Spreader, Carry Handle, Bag\u003c\/li\u003e\n\u003cli\u003eSpeedSwap Clamp-Style Base\u003c\/li\u003e\n\u003cli\u003eSpeedLevel Technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"l1div\"\u003e \u003c\/div\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cstrong\u003eSachtler aktiv8T Touch \u0026amp; Go Fluid Head with SpeedLevel \u0026amp; 7-Step Drag for Select Sachtler Tripods (75mm)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eSachtler aktiv8T Sideload Fluid Head \u003c\/strong\u003e truly innovative SpeedLevel technology to provide almost instant mounting and leveling of your camera rig on select Sachtler tripods. The clamp and stud SpeedLevel system saves precious time leveling your camera rig by eliminating the need to screw on a tie-down knob. Designed for larger DSLRs, mirrorless, and digital cine-style cameras, the aktiv8T supports rigs weighing up to 12 kg. This fluid head features 15 steps of counterbalance and seven steps of pan and tilt drag adjustment, plus zero settings for both balance and drag.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe SpeedLevel technology replaces the traditional head screw and tie-down design with a strong clamp built into the head bowl and a stud component that clamps onto your tripod bowl or other mounting platform, such as a slider. Simply grasp the large lever on the head and pull it up to release the clamp, then press it down to lock your head in place. Partially lifting the lever allows you to quickly and easily level the head.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eWhen used with a separately available flowtech tripod, the activ8T enables you to spread the legs flat, getting as low to the ground as your head can without a tie-down knob getting in the way. You can also now mount your head directly onto a slider using a separately available aktiv system stud that screws onto support systems with a 3\/8\"-16 threaded stud.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe PrismBubble level system is pressed once to illuminate the bubble level to be illuminated or pressed twice to light up both the bubble level and the drag settings, a boon when working in darker environments. The bubble level also has a built-in prism, enabling you to more easily level the head when the legs are at set at maximum height or an awkward angle.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eMount your camera using the aktiv8T Touch \u0026amp; Go plate with both 1\/4-20\" and 3\/8\"-16 camera screws. A sliding range of 7 cm helps the head to quickly balance variously configured rigs. The Sachtler aktiv8T head also features a detachable pan bar that can be mounted onto the rosettes on either the right or left side of the head.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler aktiv8T Touch \u0026amp; Go Fluid Head with SpeedLevel \u0026amp; 7-Step Drag for Select Sachtler Tripods (75mm)\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e12kg Capacity Fluid Drag Head\u003c\/li\u003e\n\u003cli\u003e75mm Half Ball\u003c\/li\u003e\n\u003cli\u003eSpeedSwap Clamp-Style Base\u003c\/li\u003e\n\u003cli\u003eSpeedLevel Technology\u003c\/li\u003e\n\u003cli\u003eTouch \u0026amp; Go Plate with 12 cm Sliding Range\u003c\/li\u003e\n\u003cli\u003e15-Step + 0 Counterbalance\u003c\/li\u003e\n\u003cli\u003e7-Step + 0 Pan\/Tilt Drag\u003c\/li\u003e\n\u003cli\u003eIlluminated Prism Bubble Adds Visibility\u003c\/li\u003e\n\u003cli\u003e+90° to -70° Tilt Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"gText\"\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eaktiv Fluid Head Compatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe aktiv6 and aktiv8 fluid heads are compatible with Sachtler 75mm tripods (flowtech 75 aktiv, Tripod 75\/2 AL, SpeedLock 75, ENG 75\/2 D, DA 75L)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eSpeedLevel Technology\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eUse the large integrated lever to quickly mount, level, and lock the head on your tripod or other base; lift up to release, lift partially to level, and press down to lock the head firmly in place\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eSpeedSwap Base\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eCentered around a metal stud, the SpeedSwap base clamps onto any 75mm bowl tripod or to the separately available slider base; additional bases can be purchased separately to fit a second tripod, dolly, or slider\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003ePrismBubble Level\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe illuminated PrismBubble is visible from any height or angle, saving you time when leveling at higher or lower positions\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003e12 kg Capacity Fluid Head\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThis 12 kg capacity fluid head is suited for larger DSLRs, mirrorless MFT cameras, and pro-style digital cine cameras\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eStepped Counterbalance and Drag\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e15 steps of counterbalance and seven steps of pan and drag plus zero settings for free spins and tilts\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eTouch \u0026amp; Go Plate\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Touch \u0026amp; Go platform provides quick camera mounting with 7 cm of travel for balancing your rig and both 1\/4\"-20 and 3\/8\"-16 camera screws\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"l1div\"\u003e \u003c\/div\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cstrong\u003eSachtler flowtech 75 GS Carbon Fiber Tripod with Ground Spreader\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eSachtler flowtech 75 GS Carbon Fiber Tripod with Ground Spreader\u003c\/strong\u003e eschews the common single or double carbon fiber tube design and instead has redesigned the shape of the legs for improved torsional strength. The legs weigh just under 3 kg yet they can support a payload of up to 20 kg and extend from a minimum height of 25 cm to a maximum height of 158 cm when using the included ground spreader. Each leg features a single clamping lever that locks and unlocks the sections.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eEach leg extends or retracts independently from the other two, and when it is detached from the spreader each leg can pivot without affecting the other legs. This is especially useful when working on rough or uneven terrain. You can remove the spreader completely and lock each leg in one of three positions, so you can work without a spreader if you wish. This enables you to spread the legs extremely wide for low shots, while the tripod legs maintain their torsional stability. The dual spikes at the end of each leg provide extra grip when working on softer ground without the spreader. An attachment point and carry handle are included.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler flowtech 75 GS Carbon Fiber Tripod with Ground Spreader\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDual-stage, carbon fiber, 75mm bowl tripod\u003c\/li\u003e\n\u003cli\u003eThe design and construction of the legs provide tremendous torsional stability. In other words, the legs resist twisting when you pan the tripod head.\u003c\/li\u003e\n\u003cli\u003eThe included ground spreader snaps easily onto the dual-spiked feet using a combination elastic and lever attachment system. The rubber feet are removable from the spreader and can be attached directly to the dual spiked feet of the legs for operation on hard\/delicate surfaces without the spreader.\u003c\/li\u003e\n\u003cli\u003eEach leg features a single clamping lever lock design at the top of the leg, near the 75mm bowl. This allows you to loosen all three leg sections from a single location, saving you time while reducing the wear and tear on your body as you don't have to bend down to loosen a leg lock at the bottom to lower or raise the legs.\u003c\/li\u003e\n\u003cli\u003eThe legs incorporate a locking mechanism that enables the legs to move completely freely, suitable when working with a spreader, or to lock at one of three angles, suitable for use when working without a spreader.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"l1div\"\u003e \u003c\/div\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cstrong\u003eSachtler Sachtler Padded Bag for flowtech 75 or TT Tripod with FSB Fluid Head\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"mText\"\u003eWith dimensions of 93 x 20 x 23 cm, this\u003cstrong class=\"h1Lit\"\u003eSachtler Padder Bag\u003c\/strong\u003e is designed specifically for carrying a flowtech 75 or TT tripod equipped with an FSB fluid head. It is made with a high-density 900D fabric, which is both flame retardant and water-resistant to help ensure that your equipment stays safe. Additionally, layers of both open-cell and closed-cell foam are used in the construction to protect your gear against small bumps and shocks.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe bag opens via a full-length zipper found at the top, which allows for easy access while shooting. For transport, two straps on each side can be connected to an integrated handgrip for easy carrying. There are also small handles on each side of the bag where the zipper ends, and right next to them are D-rings that can be used to connect an optional shoulder strap. Finally, a clear plastic window on the outside allows you to insert a tag with your name or phone number for easy identification when travelling.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler Sachtler Padded Bag for flowtech 75 or TT Tripod with FSB Fluid Head\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePadded bag with dimensions of 93 x 20 x 23 cm, designed for carrying a flowtech 75 or TT tripod with an FSB fluid head\u003c\/li\u003e\n\u003cli\u003e900D water-resistant fabric on the exterior, with layers of foam to help cushion gear against bumps\u003c\/li\u003e\n\u003cli\u003eFull-length zipper allows for easy access to the interior compartment\u003c\/li\u003e\n\u003cli\u003eConnecting hand straps, side handles, and D-rings available for transport\u003c\/li\u003e\n\u003cli\u003eClear plastic window on one of the sides allows you to insert a name tag for easy identification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - ST-S2068T-FTGS\u003c\/li\u003e\n\u003cli\u003eGTIN - 5060520687346\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sachtler Tripods","offers":[{"title":"Default Title","offer_id":47111672463545,"sku":"140468","price":7920.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/sachtler_aktiv8t_flowtech75_gs_tripod_system_01.jpg?v=1778109298"},{"product_id":"sachtler-aktiv6-flowtech75-ms-tripod-system","title":"Sachtler aktiv6 flowtech75 MS Tripod System","description":"\u003cp class=\"mText\"\u003eWeighing only 6.2 kg the \u003cstrong class=\"h1Lit\"\u003eSachtler aktiv6 flowtech75 MS Tripod System\u003c\/strong\u003e is both lightweight and durable, designed to be a long-serving and high-performing part of your kit. This system is the perfect choice for professional medium-sized camcorders and digital cine camera set ups of up to 8 kg. 15 counterbalance steps allow for fast and precise balancing of your camera. Its sideload mechanism with a long sliding range of 120 mm make loading and positioning the camera quick and easy. Three drag settings provide smooth and fast options to adjust drag performance without jolts or vibrations. The illuminated PrismBubble with top or side view makes levelling easy from any height.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler aktiv6 flowtech75 MS Tripod System\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eaktiv6 Sideload Fluid Head\u003c\/li\u003e\n\u003cli\u003eflowtech75 Tripod\u003c\/li\u003e\n\u003cli\u003e8 kg Capacity\u003c\/li\u003e\n\u003cli\u003eMid-Level Spreader, Carry Handle, Bag\u003c\/li\u003e\n\u003cli\u003eSpeedSwap Clamp-Style Base\u003c\/li\u003e\n\u003cli\u003eSpeedLevel Technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cdiv class=\"l1div\"\u003e \u003c\/div\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cstrong\u003eSachtler Flowtech 75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong class=\"h1Lit\"\u003eSachtler aktiv6 Fluid Head with unique SpeedLevel technology\u003c\/strong\u003e can be levelled in seconds giving you time to get the perfect shot in the documentary, corporate, or news applications. The SpeedSwap™ system delivers the fastest way to switch between tripod and slider in seconds giving you ultimate flexibility.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cdiv class=\"l1div\"\u003e \u003c\/div\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cstrong\u003eSachtler flowtech75 MS Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eCapture the widest range of shots in the shortest time with aktiv6 combined with \u003cstrong class=\"h1Lit\"\u003eSachtler flowtech75 MS Carbon Fiber Tripod\u003c\/strong\u003e. With no bowl clamp required, flowtech can go flat to the ground for extreme low-angle shots – using the versatile hinge lock mechanism of flowtech. The system delivers the widest height range. The 2-stage carbon fibre flowtech tripod with high torsional stiffness has unique quick-release brakes which can be deployed and adjusted in an instant. Its ergonomic design makes the tripod comfortable to carry, on the shoulder or carry handle, no matter where your creativity takes you. flowtech comes with a quick attach rubber foot mechanism and an adjustable mid-level spreader. When you are ready to move on, the legs are held together by a magnetic lock for transportation.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - ST-S2064S-FTMS\u003c\/li\u003e\n\u003cli\u003eGTIN - 5060520687292\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sachtler Tripods","offers":[{"title":"Default Title","offer_id":47111672496313,"sku":"140463","price":6425.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/sachtler_aktiv6_flowtech75_ms_tripod_system-01.jpg?v=1778109298"},{"product_id":"sachtler-aktiv6-sideload-fluid-head-with-speedlevel-for-select-75mm-sachtler-tripods","title":"Sachtler aktiv6 Sideload Fluid Head with SpeedLevel for Select 75mm Sachtler Tripods","description":"\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eSachtler aktiv8T Sideload Fluid Head\u003c\/strong\u003e truly innovative SpeedLevel technology to provide almost instant mounting and leveling of your camera rig on select Sachtler tripods. The clamp and stud SpeedLevel system saves precious time leveling your camera rig by eliminating the need to screw on a tie-down knob. Designed for DSLRs, mirrorless, and digital cine-style cameras, the aktiv6 supports rigs weighing up to 8 kg. This fluid head features 15 steps of counterbalance and three steps of pan and tilt drag adjustment, plus zero settings for both balance and drag.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe SpeedLevel technology replaces the traditional head screw and tie-down design with a strong clamp built into the head bowl and a stud component that clamps onto your tripod bowl or other mounting platform, such as a slider. Simply grasp the large lever on the head and pull it up to release the clamp, then press it down to lock your head in place. Partially lifting the lever allows you to quickly and easily level the head.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eWhen used with a separately available flowtech tripod, the activ6 enables you to spread the legs flat, getting as low to the ground as your head can without a tie-down knob getting in the way. You can also mount your head directly onto a slider using a separately available aktiv system stud that screws onto support systems with a 3\/8\"-16 threaded stud.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe PrismBubble level system is pressed once to illuminate the bubble level to be illuminated or pressed twice to light up both the bubble level and the drag settings, a boon when working in darker environments. The bubble level also has a built-in prism, enabling you to more easily level the head when the legs are at set at maximum height or an awkward angle.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eMount your camera using the aktiv8T Touch \u0026amp; Go plate with both 1\/4-20\" and 3\/8\"-16 camera screws. A sliding range of 2.4\" helps the head to quickly balance variously configured rigs. The Sachtler aktiv8T head also features a detachable pan bar that can be mounted onto the rosettes on either the right or left side of the head.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eMount your camera using the aktiv6 sliding balance plate with 1\/4-20\" screw and locating pin. With a sliding range of 4.7\", this head adapts quickly to balance variously configured rigs. The Sachtler aktiv6 head also features a detachable pan bar that can be mounted onto the rosettes on either the right or left side of the head.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler aktiv8T Touch \u0026amp; Go Fluid Head with SpeedLevel \u0026amp; 7-Step Drag for Select Sachtler Tripods (75mm)\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e12 kg Capacity Fluid Drag Head\u003c\/li\u003e\n\u003cli\u003e75mm Half Ball\u003c\/li\u003e\n\u003cli\u003eSpeedSwap Clamp-Style Base\u003c\/li\u003e\n\u003cli\u003eSpeedLevel Technology\u003c\/li\u003e\n\u003cli\u003e15-Step + 0 Counterbalance\u003c\/li\u003e\n\u003cli\u003e3-Step + 0 Pan\/Tilt Drag\u003c\/li\u003e\n\u003cli\u003eEasy-View Illuminated PrismBubble\u003c\/li\u003e\n\u003cli\u003eSideload Plate with 12 cm Sliding Range\u003c\/li\u003e\n\u003cli\u003e+90° to -70° Tilt Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"gText\"\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eaktiv Fluid Head Compatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe aktiv6 and aktiv8 fluid heads are compatible with Sachtler 75mm tripods (flowtech 75 aktiv, Tripod 75\/2 AL, SpeedLock 75, ENG 75\/2 D, and DA 75L)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eSpeedLevel Technology\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eUse the large integrated lever to quickly mount, level, and lock the head on your tripod or other base; lift up to release, lift partially to level, and press down to lock the head firmly in place\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eSpeedSwap Base\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eCentered around a metal stud, the SpeedSwap base clamps onto any 75mm bowl tripod or to the separately available slider base; additional bases can be purchased separately to fit a second tripod, dolly, or slider\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003ePrismBubble Level\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe illuminated PrismBubble is visible from any height or angle, saving you time when leveling at higher or lower positions\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003e12 kg Capacity Fluid Head\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThis 12 kg capacity fluid head is suited for larger DSLRs, mirrorless MFT cameras, and pro-style digital cine cameras\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eStepped Counterbalance and Drag\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eStepped Counterbalance and Drag\u003c\/p\u003e\n\u003cp\u003e15 steps of counterbalance and seven steps of pan and drag plus zero settings for free spins and tilts\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eStepped Counterbalance and Drag\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e15 steps of counterbalance and seven steps of pan and drag plus zero settings for free spins and tilts\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - ST-S2064S\u003c\/li\u003e\n\u003cli\u003eMPN - 5060520688374\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sachtler Tripods","offers":[{"title":"Default Title","offer_id":47111672561849,"sku":"140461","price":3635.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/sachtler_aktiv8t_touch_go_fluid_head_01.jpg?v=1778109292"},{"product_id":"sachtler-aktiv8t-touch-go-fluid-head-with-speedlevel-for-select-100mm-sachtler-tripods","title":"Sachtler aktiv8T Touch \u0026 Go Fluid Head with SpeedLevel for Select 100mm Sachtler Tripods","description":"\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eSachtler aktiv8T Sideload Fluid Head.\u003c\/strong\u003e Truly innovative SpeedLevel technology to provide almost instant mounting and leveling of your camera rig on select Sachtler tripods. The clamp and stud SpeedLevel system saves precious time leveling your camera rig by eliminating the need to screw on a tie-down knob. Designed for larger DSLRs, mirrorless, and digital cine-style cameras, the aktiv8T supports rigs weighing up to 12 kg. This fluid head features 15 steps of counterbalance and seven steps of pan and tilt drag adjustment, plus zero settings for both balance and drag.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe SpeedLevel technology replaces the traditional head screw and tie-down design with a strong clamp built into the head bowl and a stud component that clamps onto your tripod bowl or other mounting platform, such as a slider. Simply grasp the large lever on the head and pull it up to release the clamp, then press it down to lock your head in place. Partially lifting the lever allows you to quickly and easily level the head.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eWhen used with a separately available flowtech tripod, the activ8T enables you to spread the legs flat, getting as low to the ground as your head can without a tie-down knob getting in the way. You can also now mount your head directly onto a slider using a separately available aktiv system stud that screws onto support systems with a 3\/8\"-16 threaded stud.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eThe PrismBubble level system is pressed once to illuminate the bubble level to be illuminated or pressed twice to light up both the bubble level and the drag settings, a boon when working in darker environments. The bubble level also has a built-in prism, enabling you to more easily level the head when the legs are at set at maximum height or an awkward angle.\u003c\/p\u003e\n\u003cp class=\"mText\"\u003eMount your camera using the aktiv8T Touch \u0026amp; Go plate with both 1\/4-20\" and 3\/8\"-16 camera screws. A sliding range of 12 cmhelps the head to quickly balance variously configured rigs. The Sachtler aktiv8T head also features a detachable pan bar that can be mounted onto the rosettes on either the right or left side of the head.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler aktiv8T Touch \u0026amp; Go Fluid Head with SpeedLevel \u0026amp; 7-Step Drag for Select Sachtler Tripods (75mm)\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e12 kg Capacity Fluid Drag Head\u003c\/li\u003e\n\u003cli\u003e75mm Half Ball\u003c\/li\u003e\n\u003cli\u003eSpeedSwap Clamp-Style Base\u003c\/li\u003e\n\u003cli\u003eSpeedLevel Technology\u003c\/li\u003e\n\u003cli\u003eTouch \u0026amp; Go Plate with 12 cm Sliding Range\u003c\/li\u003e\n\u003cli\u003e15-Step + 0 Counterbalance\u003c\/li\u003e\n\u003cli\u003e7-Step + 0 Pan\/Tilt Drag\u003c\/li\u003e\n\u003cli\u003eIlluminated Prism Bubble Adds Visibility\u003c\/li\u003e\n\u003cli\u003e+90° to -70° Tilt Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"gText\"\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eaktiv Fluid Head Compatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe aktiv6 and aktiv8 fluid heads are compatible with Sachtler 75mm tripods (flowtech 75 aktiv, Tripod 75\/2 AL, SpeedLock 75, ENG 75\/2 D, DA 75L)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eSpeedLevel Technology\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eUse the large integrated lever to quickly mount, level, and lock the head on your tripod or other base; lift up to release, lift partially to level, and press down to lock the head firmly in place\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eSpeedSwap Base\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eCentered around a metal stud, the SpeedSwap base clamps onto any 75mm bowl tripod or to the separately available slider base; additional bases can be purchased separately to fit a second tripod, dolly, or slider\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003ePrismBubble Level\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe illuminated PrismBubble is visible from any height or angle, saving you time when leveling at higher or lower positions\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003e12 kg Capacity Fluid Head\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThis 12 kg capacity fluid head is suited for larger DSLRs, mirrorless MFT cameras, and pro-style digital cine cameras\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eStepped Counterbalance and Drag\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eStepped Counterbalance and Drag 15 steps of counterbalance and seven steps of pan and drag plus zero settings for free spins and tilts\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eStepped Counterbalance and Drag\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e15 steps of counterbalance and seven steps of pan and drag plus zero settings for free spins and tilts\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"h2Lit\"\u003e\u003cspan class=\"h2Lit\"\u003eTouch \u0026amp; Go Plate\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Touch \u0026amp; Go platform provides quick camera mounting with 12 cm of travel for balancing your rig and both 1\/4\"-20 and 3\/8\"-16 camera screws\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - 5060520688381\u003c\/li\u003e\n\u003cli\u003eMPN - ST-S2068T\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sachtler Tripods","offers":[{"title":"Default Title","offer_id":47111689044153,"sku":"140467","price":4665.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/sachtler_aktiv8t_touch_13.jpg?v=1778109350"},{"product_id":"sachtler-system-aktiv10t-flowtech100-ms-tripod-system","title":"Sachtler System aktiv10T flowtech100 MS Tripod System","description":"\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eSachtler System aktiv10T flowtech100 MS Tripod System\u003c\/strong\u003e pairs the activ10 fluid head with the lightweight, carbon fiber flowtech 100 MS tripod with mid-level spreader. This kit offers lightning fast SpeedSwap technology, a sideload camera plate, 15 levels (+0) of counterbalance, 7 levels (+0) of pan and tilt drag, and stable support for camera rigs weighing up to 12 kg. A padded carrying bag rounds out this tripod kit.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler System aktiv10T flowtech100 MS Tripod System\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eaktiv10 Sideload Fluid Head\u003c\/li\u003e\n\u003cli\u003eSpeedSwap Clamp-Style Base\u003c\/li\u003e\n\u003cli\u003eflowtech 100 Tripod, Mid Spreader \u0026amp; Bag\u003c\/li\u003e\n\u003cli\u003eSpeedLevel Technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - ST-S2072T-FTMS\u003c\/li\u003e\n\u003cli\u003eGTIN - 5060896400136\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sachtler Tripods","offers":[{"title":"Default Title","offer_id":47111886307513,"sku":"144763","price":12260.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/1602548540_img_1426812.jpg?v=1778109987"},{"product_id":"sachtler-aktiv10t-fluid-head","title":"Sachtler aktiv10T Fluid Head","description":"\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eSachtler aktiv™ 100 mm fluid head\u003c\/strong\u003e supports payloads of up to 12 kg (26.5 lbs.), with unique SpeedLevel™ technology it can be levelled in seconds giving you time to get the perfect shot in documentary, corporate or news applications. The SpeedSwap™ system delivers the fastest way to switch between tripod and slider in seconds giving you ultimate flexibility.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler aktiv10T Fluid Head\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLevel and lock your head in an instant without missing a second of the action\u003c\/li\u003e\n\u003cli\u003eUnique SpeedLevel technology.\u003c\/li\u003e\n\u003cli\u003eVisible from any height or angle - day or night.\u003c\/li\u003e\n\u003cli\u003eInnovative PrismBubble.\u003c\/li\u003e\n\u003cli\u003eCapture extreme low angle shots right down to the ground.\u003c\/li\u003e\n\u003cli\u003eInnovative streamlined mounting system.\u003c\/li\u003e\n\u003cli\u003eSwitch between tripod and slider in seconds.\u003c\/li\u003e\n\u003cli\u003eRevolutionary SpeedSwap system.\u003c\/li\u003e\n\u003cli\u003eCreate moving stories, whatever the weather.\u003c\/li\u003e\n\u003cli\u003ePerformance tested to the extreme.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - ST-S2072T\u003c\/li\u003e\n\u003cli\u003eGTIN - 5060896400129\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sachtler Tripods","offers":[{"title":"Default Title","offer_id":47111894106297,"sku":"144761","price":5895.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/tripod_01_2.jpg?v=1778110018"},{"product_id":"sachtler-system-aktiv10t-flowtech100-gs-tripod-system","title":"Sachtler System aktiv10T flowtech100 GS Tripod System","description":"\u003cp class=\"mText\"\u003eThe \u003cstrong class=\"h1Lit\"\u003eSachtler System aktiv10T flowtech100 GS Tripod System\u003c\/strong\u003e pairs the activ10 fluid head with the lightweight, carbon fiber flowtech 100 GS tripod with ground spreader. This kit offers lightning fast SpeedSwap technology, a sideload camera plate, 15 levels (+0) of counterbalance, 7 levels (+0) of pan and tilt drag, and stable support for camera rigs weighing up to 12 kg. A padded carrying bag rounds out this tripod kit.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch2 class=\"h2Lit\"\u003eKey Features of the Sachtler System aktiv10T flowtech100 GS Tripod System\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eaktiv10 Sideload Fluid Head\u003c\/li\u003e\n\u003cli\u003eSpeedSwap Clamp-Style Base\u003c\/li\u003e\n\u003cli\u003eflowtech 100 Tripod\/Ground Spreader\/Bag\u003c\/li\u003e\n\u003cli\u003eSpeedLevel Technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cul class=\"mpn\"\u003e\n\u003cli\u003eMPN - ST-S2072T-FTGS\u003c\/li\u003e\n\u003cli\u003eGTIN - 5060896400143\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sachtler Tripods","offers":[{"title":"Default Title","offer_id":47111895056569,"sku":"144762","price":11390.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/8897\/7337\/files\/1602546715_1597844.jpg?v=1778110023"}],"url":"https:\/\/www.digidirect.com.au\/collections\/brand-sachtler-tripods.oembed","provider":"digiDirect","version":"1.0","type":"link"}