Benro Tortoise 34C Carbon Fiber 3 Series Tripod System with S4Pro Video Head

The Benro Tortoise 34C Carbon Fiber 3 Series Tripod System with S4Pro Video Head available at digiDirect is a combination of the 34C Carbon Fiber 3 Series Tripod System, and S4Pro Fluid Head presenting excellent value for concerning content creators.

The Benro Tortoise 34C Carbon Fiber 3 Series Tripod System with S4Pro Video Head has been developed for those looking for a compact, lightweight travel tripod, that punches above its weight when it comes to weight capacity and stability. Without the addition of a centre column, the diameter of a folded Tortoise is just 66cm making it extremely portable and easy to stow in a backpack. A portable travel-friendly system that supports up to 4 kg loads and has a working height range of 23 to 164 cm.

There is sure to be a model to suit most photographer's requirements.

Key Features of the Benro Tortoise 34C Carbon Fiber 3 Series Tripod System with S4Pro Video Head

• 4 kg Payload, 2-Step Counterbalance
• Flat Base Fluid Head
• Leveling Ball to Flat Base Fitting
• 23 to 164 cm Height Range

34C Carbon Fiber 3 Series Tripod System

The carbon fibre legs utilize twist locks leg locks for a fast and secure setup. The head fitting on the legs incorporate a 1/4"-20 accessory mounting port, allowing you to attach a variety of accessories. The carbon fibre legs feature independent movement with three locking angles and a push-button locking system. The rubber feet feature three distinct contact surfaces providing a grip on whether the legs are vertical, on an angle, or nearly horizontal when positioned. You can remove the rubber feet and replace them with the included spiked feet if you wish.

Key Features of the 34C Carbon Fiber 3 Series Tripod System

• The legs include a flat base to ball head adapter fitting
• Allowing you to mount a flat base fluid head onto the legs and enjoy the quick levelling benefits of a ball base.
• The wide-leg spread range of the tripod allows you to use it to get as low as 23 cm off the ground and as high as 163 cm above the ground while maintaining a stable shooting platform
• The legs feature an "Auto-Hold Leg Adjustment System" that allows you to press and release the leg lock, move that leg to position
• Then press a button to release the lock on that leg to secure the leg angle
• Rubber twist locks allow you to loosen and extend or collapse each leg independently of the other legs.
• The rubber grips provide a good grip and are gentle on your hands
• The attached rubber feet feature three distinct angles to contact the mounting surface.
• This allows the feet to provide a wide contact surface for increased grip and stability when compared to standard conical shaped feet when the legs are set to acute angles
• The rubber feet can be removed and replaced with the included spiked feet

S4Pro Fluid Head

The head features a flat base, which makes it well suited to sliders and jibs, while the legs have a levelling ball to flat base head fitting, allowing you to mount the S4Pro to the legs and take advantage of the quick levelling capabilities of a ball base.

The S4Pro head has two steps of counterbalance and features fixed pan and tilt drag and has independent pan and tilt locks. The tilt range is +90/-65°, while the pan range is a full 360°. The included camera plate can be adjusted forward/backward to let you find the optimal balance for your camera. An integrated safety catch helps ensure that the plate doesn't accidentally slide free and introduce your camera to the effects of gravity. Two camera screws are supplied—1/4"-20 and 3/8"-16—that can be stored underneath the camera plate on the head itself, in dedicated slots. For attaching accessories, there's a 1/4"-20 threaded hole on each side of the head to which you can secure articulating arms.

Key Features of the S4Pro Fluid Head

• 4 kg payload
• Flat base with 3/8"-16 female
• 2 steps of counterbalance
• Fixed pan and tilt drag
• Independent pan and tilt locks
• +90/-65° tilt range
• 360° pan range
• Made of magnesium and aluminium
• Rosette adapters on the left and right side for attaching the included pan bar
• Sliding camera plate with safety lock
• 1/4"-20 and 3/8"-16 camera screws included and can be stored in dedicated spaces on the top of the head, underneath the camera plate
• Two 1/4"-20 threaded holes for accessories

• MPN - TTOR34CLVS4PRO
• GTIN - 6931747314423