Benro Reverse-Folding Aluminum Travel Tripod with S4 Pro Fluid Video Head

The Benro A2883F Reverse-Folding Aluminum Travel Tripod with S4Pro Fluid Video Head includes an A2883F Aluminum Travel Tripod and a Benro S4Pro Fluid Video Head.

The Benro A2883F Reverse-Folding Aluminum Travel Tripod is a highly compact travel tripod that can be converted to a monopod, while the S4Pro Fluid Video Head features a 60mm flat base with a 3/8"-16 thread that allows moving the head directly to most sliders, jibs, and other support gear. Combined, the two provide a highly versatile travel solution that supports up to 4 kg loads.

The tripod's centre column has a levelling adapter on the end that lets you adjust the angle of the fluid head without having to readjust the tripod legs. With rubber feet and spikes underneath them, the tripod can be used on virtually all surfaces. To convert it to a monopod, the centre column is used as the core component. One of the tripod legs unscrews and secures to the centre column, and together the two form a fully functioning monopod.

The S4Pro head features fixed pan and tilt drag, 2-step counterbalance, and independent pan and tilt locks. Virtually the entire head, including its knobs, is made of robust yet lightweight metal. It comes with a pan bar that can be attached to a rosette adapter on the left or right side. Two camera screws are supplied 1/4"-20 and 3/8"-16 that can be stored underneath the camera plate on the head itself, in dedicated slots. There's also a 1/4"-20 threaded hole on each side of the head for attaching articulating arms.

Key Features of the Benro A2883F Reverse-Folding Aluminum Travel Tripod with S4Pro Fluid Video Head

• 4 kg Payload / 2-Step Counterbalance
• 60mm Flat Base with 3/8"-16 Thread
• Center Column and Leveling Adapter
• Convertible to Full-Function Monopod

A2883F Tripod

• Reverse-folding travel tripod with a centre column and levelling adapter
• Convertible to a monopod with one of the tripod legs unscrewed and secured to the centre column
• Maximum height of 165 cm with the S4Pro attached
• Low-angle minimum height of 55 cm
• Spiked and rubber feet
• Twist leg locks
• Aluminium construction

Benro S4 Pro

The Benro S4Pro Fluid Video Head is a compact fluid video head ideal for mirrorless and DSLR camera setups weighing up to 8.8 lb. Featuring a 60mm flat base with a 3/8"-16 threaded hole, it can be used with matching 60mm flat base tripods and tripods with flat base adapters. At the same time, thanks to the flat base, it can be mounted on sliders, jibs, monopods, and other support gear. It can efficiently be moved between such gear.

The S4Pro is natively set at 1 step of counterbalance. At the push of a button on the side of the head, an additional step is added to a total of 2 steps. Next to that button is a release switch that takes you back to 1 step. There is no zero setting. The head features a fixed pan and tilt drag and has independent pan and tilt locks. The tilt range is +90/-75°, and the pan range is a full 360°.

Some parts of the head are made of magnesium and other parts of aluminium. Virtually the entire head, including its knobs, is made of robust yet lightweight metal. A pan bar is included that can be attached to a rosette adapter on the left or right side of the head, for left- or right-handed users. A camera plate is included that can be adjusted forward/backward to let you find the optimal balance for your camera. A safety lock on the plate ensures that once mounted, the plate won't slip out if you move it in either direction too much. Two camera screws are supplied 1/4"-20 and 3/8"-16 that can be stored underneath the camera plate on the head itself, in dedicated slots. For attaching accessories, there's a 1/4"-20 threaded hole on each side of the head to which you can secure articulating arms.

Key Features of the Benro S4Pro Fluid Video Head

• 4 kg payload
• 60mm flat base with a 3/8"-16 thread
• Compatible with 60mm flat base tripods and can be mounted directly on most sliders, jibs, and monopods
• 1-2 steps of counterbalance
• Fixed pan and tilt drag
• Independent pan and tilt locks
• +90/-75° tilt range
• 360° pan range
• Made of magnesium and aluminium
• Rosette adapters on the left and right side for attaching the included pan bar
• Sliding camera plate with safety lock
  1/4"-20 and 3/8"-16 camera screws included and can be stored in dedicated spaces on the top of the head, underneath the camera plate
• Two 1/4"-20 threaded holes for accessories

• MPN - A2883FS4PRO
• GTIN - 6931747313013