Audio-technica AT2040 Hypercardioid Dynamic Podcast Microphone Boom Arm Bundle

Bundled for solo podcasting with great sound quality and a traditional workflow, this budget-friendly Audio-technica AT2040 Hypercardioid Dynamic Podcast Microphone Boom Arm Bundle benefits from A-T's decades of expertise in constructing trusted microphones for the studio and stage. The AT2040 features a large-diaphragm dynamic capsule in a classic end-address configuration, just like traditional broadcast-style mics used by pros. Not only does the mic deliver a warm, yet robust vocal tone, but it also picks up minimal background noise and room reflections, thanks to its hypercardioid polar pattern.

By incorporating an internal multistage pop filter, the AT2040 is able to reduce vocal plosives—popping sounds from strong consonants such as 'p' and 'b'—without relying on an external pop screen. Additionally, the integrated shockmount helps prevent noise from stand handling and other vibrations while keep the overall size down. Due to its XLR 3-pin output connector and low sensitivity, the AT2040 should be used with a mic preamp that can provide moderate to high gain. Being a dynamic mic, it requires no batteries or phantom power.

Key Features of the Audio-technica AT2040 Hypercardioid Dynamic Podcast Microphone Boom Arm Bundle

• For Solo Podcasts & Broadcasts
• AT2040 Hypercardioid Dynamic Mic
• Broadcast Arm with Integrated XLR
• End-Address Broadcast-Style Mic
• Large-Diaphragm Dynamic Capsule
• Warm, Robust Sound
• Minimal Background & Stand-Borne Noise
• Integrated Shockmount
• Internal Pop Filter, XLR 3-Pin Output

Auray BAI-2X Two-Section Broadcast Arm with Internal Springs and Integrated XLR Cable

The Auray BAI-2X is a two-section broadcast arm with internal springs and an integrated XLR cable. This versatile and sturdy broadcast arm is great for studio as well as home use. It's ideal for broadcast, voiceover, and podcasts.

The BAI-2X broadcast arm is designed with internal springs that provide a clean and sleek look. The internal balance springs are precision engineered to support and hold in place microphones of up to 5 lb / 2.27kg. The design also minimizes handling noise when re-positioning the arm. The broadcast arm features a standard 5/8"-27 microphone stud mount that is compatible with most shockmounts and microphone clips. The angle of the microphone stud mount can be adjusted and secured with the locking knob, and the angle is maintained when re-positioning the arm. This eliminates the need to readjust it every time the arm is moved. With an extension of up to 40 inches, and the ability to rotate the arm 360°, the BAI-2X allows for precise microphone placement.

The BAI-2X also features a heavy-duty combo mount that consists of a sturdy C-clamp and a heavy-metal desktop mount. The C-clamp is capable of fastening onto desktops up to 2.3" thick. The C-clamp's slim design minimizes the clearance needed to mount it between a desk and wall. The desktop mount detaches from the C-clamp and provides the option of permanent installation to a desktop with the mounting screws (included). A 14" riser is included for adding height to the broadcast arm in order to extend over computer or studio monitors.

• MPN - AT2040 BOOM
• GTIN - TBA