The supercardioid polar pattern and line plus gradient acoustic principle effectively minimize audio and noise at the off-axis (sides) of the microphone, while the front of the capsule accurately reproduces incoming audio signal. The result is greater intelligibility and signal-to-noise ratio while using the NTG-1 in noisy environments.
The NTG-1 is powered with an external +48 Volt phantom power source; the output is a standard 3-pin XLR male connector. The microphone features a rugged, all metal, light weight enclosure that is ideal for camera mounting yet durable enough to withstand the rigors of heavy road use. The Rode NTG-1 is packaged with a microphone stand mount and windscreen. With a history of manufacturing quality studio microphones, Rode has implemented low noise output electronics and wide bandwidth, both of which attribute to the NTG-1's broadcast sound quality.
Super-Cardioid Polar Pattern
The super-cardioid polar pattern and line gradient acoustic principle allow for a narrow pick up pattern at the front of the capsule while minimizing noise at the off-axis sections.
Lightweight Durable Construction
The NTG-1 features a lightweight metal housing that is ideal for camera mounting.
Low Handling Noise
Low noise output electronics provides high signal-to-noise ratio. The NTG-1 is designed to also reduce noise caused by handling, rigid mounting hardware, loose cabling etc.
Polar Pattern: Supercardioid
Frequency Response: 20Hz to 20kHz
Dynamic Range (Typical): 121dB (per IEC651, IEC268-15)
Signal-to-Noise Ratio: 76dB (1kHz rel, 1Pa; per IEC651, IEC268-15)
Maximum Input Sound Level: 139dB SPL (@ 1% THD into 1k ohm)
Power Requirements: +48V phantom, 44V to 52V
Output Impedance: 50 ohms
Output Connectors: 3-pin XLR balanced
Low Frequency Roll-Off: Yes
Dimensions (LxDiameter): 217 x 022mm
|Form Factor||Stand/Boom Mount|
|Operating Principle||Line Gradient|
|Diaphragm||0.5" / 12.70 mm|
|High-Pass Filter||80 Hz, 12 dB/Octave|
|On-Board Controls||High-Pass Filter|
|Frequency Range||20 Hz to 20 kHz|
|Maximum SPL||139 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)|
|Off-Axis Rejection||14 dB at 60°
16 dB at 120°
12 dB at 180°
|Sensitivity||-36 dB/Pa at 1 kHz|
|Output Level||6.9 mV (Max)|
|Dynamic Range||121 dB|
|Signal-to-Noise Ratio||76 dB A-Weighted (1 kHz)|
|Equivalent Noise Level||18 dB A-Weighted|
|Output Connectors (Analog)||1 x XLR 3-Pin|
|Operating Voltage||24 to 48 V|
|Mounting||3/8"-16 Female, 5/8"-27 Female, Mic Clip (with Included Hardware)|
|Dimensions||ø: 0.87 x L: 8.62" / ø: 22 x L: 219 mm|
|Weight||3.7 oz / 105 g (Microphone)|
Rode NTG-1 Condenser Shotgun Microphone
- 1-year warranty
- 10-year extended warranty when you register your microphone*