Rode Rode SC6-L Mobile Interface for iOS Devices and Compatible Microphones

Request a pricematch
Out of stock
Only -1 left

Enter your email address and we'll email you as soon as the item is back in stock

Earn 210 Qantas Points
product overview
product overview
  • 2x2 Interface for iOS Devices
  • 2 x 3.5mm TRRS Inputs for Microphones
  • 1 x 3.5mm Headphone Out for Monitoring
  • Lightning Connector for iOS Devices
  • 24-Bit / 48 kHz Recording
  • For Use with RODE Recorder App
  • Control Preamp Gain, Monitoring via App
  • Works with Stock iOS Audio/Video Apps

The RODE SC6-L is an interface designed to record two-person interviews directly to your iOS device. The interface accepts the inputs of the RODE smartLav+ microphone, multiple types of RODE VideoMics (in conjunction with TRRS adapters), and third-party microphones with the appropriate TRRS connection points.

At one end of the SC6-L, you'll find two 3.5mm TRRS jacks. These are for your microphones. Between the two TRRS jacks is a 3.5mm headphone output for monitoring the incoming signal. At the other end of the interface you'll see the lightning connector, which routes digital signal into your iOS device. The SC6-L facilitates audio recording at resolutions of 24-bit and sample rates of up to 48 kHz, making it a broadcast-quality unit.

The SC6-L works with the RODE Reporter App. This app allows you to change preamp gain and switch between record modes. You can also turn direct monitoring on or off from the app. Other apps work with the SC6-L such as the onboard Camera app, GarageBand, Voice Memos, and others. The SC6-L is compatible with devices sporting iOS 11 and later.

Key Features at a Glance
2 x 3.5mm TRRS microphone inputs
1 x 3.5mm headphone output
Pairs with RODE Reporter App
App controls record mode, direct monitoring, and mic-pre gain
Device works with built-in video/audio capturing apps
  • MPN -  SC6L
  • GTIN - 698813005451
+ Read more
Packed Weight52g
MaterialPC and ABS Plastic
Output ConnectionSC6-L: 3.5mm Headphone Output
Computer ConnectivityLightning (iPhone/iPad/iPod)
Analog Outputs3.5mm TRS Headphone Output
Bus PoweredYes
Direct MonitorYes
Simultaneous I/O2/2
Frequency RangeSC6L: 20Hz - 20 kHz
Bit Depth24-bit
Sample Rates44.1/48 kHz
OS RequirementsiOS 11 and higher
+ Read more
Write Your Own Review
You're reviewing:Rode Rode SC6-L Mobile Interface for iOS Devices and Compatible Microphones
Your Rating
+ Read more
What’s In The Box

Rode SC6-L Mobile Interface for iOS Devices and Compatible Microphones

  • Rode SC6-L x 1
+ Read more

Read Our Helpful Buying Guides

Helpful Buying Guide