The SR-PAX2 from Saramonic is an active 2-channel audio adapter designed to provide a compact solution for recording two signals to any DSLR or camcorder that has a standard mounting base, and a built-in audio jack. It features left and right gain controls and meters, supplies phantom power, and is powered by a 9V battery (available separately).
It attaches to the base of a camera, and can be mounted on a tripod or case. Connect inputs via two mono 3.5mm (1/8") jacks, the single stereo 3.5mm (1/8") jack, or two XLR jacks. Route the stereo 3.5mm (1/8") output to your DSLR or camcorder. The output can be set to mono or stereo via the M/S switch. A dedicated stereo 3.5mm (1.8") headphone output allows quick monitoring of the mic signals.
Two 1/8" (3.5 mm) stereo line/mic inputs
Two XLR microphone inputs
One 1/8" (3.5mm) stereo line output to phone
One 1/8" (3.5mm) headphone monitor output
Volume control knob
Independent input control switch
Independent L/R level meters
Independent phantom power control for inputs
Includes 3.5mm audio cable
- MPN - SARAMONIC-SRPAX2
- GTIN - 4897040884853
Name | Value |
---|---|
THD+N | Less than 0.01% @ 1 kHz, -30 dBu input |
Phantom Power | Input 1: 5 V / 3 V power supply Input 2: 48 V power supply |
Level Meters | -18 dB to +3 dB in 3 dB increments |
Inputs | 2 x XLR 3-pin 3 x 3.5 mm mini jacks (one stereo, two mono) |
Frequency Response | 20 Hz to 20 kHz, 0.5 dB |
Power Requirement | 9 V alkaline or lithium battery |
Battery Life | 5 hours, typical with alkaline battery 3 hours, typical with lithium battery |
Dimensions | 136.0 x 80.5 x 62.5 mm |
Weight | 382.7 g |
Output Connection | 1 x 3.5 mm mini jack for stereo line output 1 x 3.5 mm mini jack for headphone output |
Input Gain | Input 1: Line: 0 dB Mic/Phone: 20 dB Input 2: Line: 0 dB Mic/Phone: 20 dB |
Saramonic SR-PAX2 Active 2-Channel Audio Adapter for DSLR Cameras
- Saramonic SR-PAX2 Active 2-Channel Audio Adapter for DSLR Cameras x 1
- 1/8" (3.5mm) Audio Cable x 1