The SmartRig+ Di from Saramonic is a two-channel audio interface that allows you to connect professional microphones or guitars to your iPhone, iPad, and iPod touch device. With a lightning connector output, the interface can be used to record stereo sound or music to your iOS portable device.
The SmartRig+ Di provides 48V phantom power for condenser microphones and is equipped with two XLR inputs, two 1/8" inputs, and two 1/4" inputs, and an 1/8" headphone output for real-time monitoring. There are two gain-control thumbwheels that make it easy to set levels for each channel separately.
- MPN - SARAMONIC-SMARTRIG+Di
- GTIN - 4897040886840
|THD+N||Less than 0.01% @ 1 kHz, -30 dBu input|
|Headphone Connector||1/8" / 3.5 mm jack|
|Gain||+ 23 dBu to - ?|
|Audio Output Connector||Lightning connector output cable|
|Phantom Power||48 V power on/off switch|
|Audio Input Connector||1 x Combo 1/4" / 6.35 mm and XLR input|
|Audio frequency response||20 Hz to 20 kHz +/-0.5 dB|
|Dimensions||88.0 x 41.0 x 42.0 mm (LxWxH)|
|Signal to Noise Ratio||80 dB @ 1 kHz, -30 dBu input|
|Power Requirements||1 x 9 V alkaline or lithium battery|