The SmartRig Di from Saramonic is a single-channel audio interface that allows you to connect a professional microphone or guitar to your iPhone, iPad, and iPod touch. With a lightning connector output, the interface can be used to record sound or music to your iOS portable device.
The SmartRig Di provides 48V of phantom power using a 9V battery for condenser microphones and is equipped with a single combo 1/4" XLR input, and an 1/8" headphone output for real-time monitoring. In addition, there is a rotary gain control that makes it easy to set levels.
- MPN - SARAMONIC-SMARTRIGDi
- GTIN - 4897040886857
| Name | Value |
|---|---|
| THD+N | Less than 0.01% @ 1 kHz, -30 dBu input |
| Headphone Connector | 1/8" / 3.5 mm jack |
| Gain | + 23 dBu to - ? |
| Audio Output Connector | Lightning connector output cable |
| Phantom Power | 48 V power on/off switch |
| Audio Input Connector | 1 x Combo 1/4" / 6.35 mm and XLR input |
| Audio frequency response | 20 Hz to 20 kHz +/-0.5 dB |
| Dimensions | 88.0 x 41.0 x 42.0 mm (LxWxH) |
| Weight | 75.0 g |
| Signal to Noise Ratio | 80 dB @ 1 kHz, -30 dBu input |
| Power Requirements | 1 x 9 V alkaline or lithium battery |
Saramonic SmartRig Di, Single-Channel Mic and Guitar Interface with Lightning Connector for iOS Devices
Read Our Helpful Buying Guides
Saramonic SmartRig Di, Single-Channel Mic and Guitar Interface with Lightning Connector for iOS Devices
Read Our Helpful Buying Guides